Jacob/zmk
1
0
Fork 0
forked from kofal.net/zmk
Code Pull Requests Activity

refactor: Add more checks to pre-commit

Browse Source 
Updated existing pre-commit hooks and added some new hooks:

- Remove trailing whitespace
- Ensure every non-empty file ends with a new line
- Check YAML file validity
- Prevent adding large files
- Ensure any scripts with shebangs are executable

Added a GitHub action to run pre-commit on every commit. Removed any
existing actions which duplicate pre-commit.

Ran pre-commit on the codebase.
This commit is contained in:
Joel Spadin
2023-04-22 23:16:36 -05:00
committed by Pete Johanson
parent 9c4f1e02d1
commit 32ae776c42
247 changed files with 759 additions and 797 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
app/.prettierrc.js
View File

@@ -1,3 +1,3 @@
module.exports = {
endOfLine: "auto",
endOfLine: "auto",
};

10
app/boards/arm/bluemicro840/arduino_pro_micro_pins.dtsi
View File

@@ -11,11 +11,11 @@
gpio-map-mask = <0xffffffff 0xffffffc0>;
gpio-map-pass-thru = <0 0x3f>;
gpio-map
= <0 0 &gpio0 8 0> /* D0 D2 */
, <1 0 &gpio0 6 0> /* D1 D3*/
, <2 0 &gpio0 15 0> /* D2 D1*/
, <3 0 &gpio0 17 0> /* D3 D0*/
, <4 0 &gpio0 20 0> /* D4/A6 D4*/
= <0 0 &gpio0 8 0> /* D0 D2 */
, <1 0 &gpio0 6 0> /* D1 D3*/
, <2 0 &gpio0 15 0> /* D2 D1*/
, <3 0 &gpio0 17 0> /* D3 D0*/
, <4 0 &gpio0 20 0> /* D4/A6 D4*/
, <5 0 &gpio0 13 0> /* D5 C6*/
, <6 0 &gpio0 24 0> /* D6/A7 D7*/
, <7 0 &gpio0 9 0> /* D7 E6*/

2
app/boards/arm/corneish_zen/corneish_zen_v2_left.dts
View File

@@ -32,7 +32,7 @@
, <&gpio1 9 GPIO_ACTIVE_HIGH>
, <&gpio0 7 GPIO_ACTIVE_HIGH>
, <&gpio0 5 GPIO_ACTIVE_HIGH>
;
;
};
leds {

2
app/boards/arm/corneish_zen/corneish_zen_v2_right.dts
View File

@@ -33,7 +33,7 @@
, <&gpio1 9 GPIO_ACTIVE_HIGH>
, <&gpio0 7 GPIO_ACTIVE_HIGH>
;
};
leds {

1
app/boards/arm/ferris/README.md
View File

@@ -1,6 +1,5 @@
# Building ZMK for the Ferris 0.2
## Standard Build
```

2
app/boards/arm/nice60/README.md
View File

@@ -1,9 +1,11 @@
# nice!60
![nice!60](https://i.imgur.com/0YWv5PE.png)
The nice!60 is a hotswap 60% made by Nice Keyboards. https://nicekeyboards.com/nice-60
## Building nice!60 ZMK firmware
```
west build -p -b nice60
```

4
app/boards/arm/nice60/nice60.keymap
View File

@@ -12,7 +12,7 @@
/ {
keymap {
compatible = "zmk,keymap";
default_layer {
// ------------------------------------------------------------------------------------------
// | ESC | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | BKSP |
@@ -40,7 +40,7 @@
// ------------------------------------------------------------------------------------------------
bindings = <
&bt BT_CLR &kp F1 &kp F2 &kp F3 &kp F4 &kp F5 &kp F6 &kp F7 &kp F8 &kp F9 &kp F10 &kp F11 &kp F12 &rgb_ug RGB_EFR
&bt BT_SEL 0 &trans &kp UP &trans &rgb_ug RGB_HUI &rgb_ug RGB_SAI &rgb_ug RGB_BRI &rgb_ug RGB_SPI &trans &trans &trans &trans &trans &trans
&bt BT_SEL 0 &trans &kp UP &trans &rgb_ug RGB_HUI &rgb_ug RGB_SAI &rgb_ug RGB_BRI &rgb_ug RGB_SPI &trans &trans &trans &trans &trans &trans
&bt BT_SEL 1 &kp LEFT &kp DOWN &kp RIGHT &rgb_ug RGB_HUD &rgb_ug RGB_SAD &rgb_ug RGB_BRD &rgb_ug RGB_SPD &trans &trans &trans &trans &rgb_ug RGB_EFF
&bt BT_SEL 2 &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans
&bt BT_SEL 3 &trans &trans &rgb_ug RGB_TOG &kp PSCRN &trans &trans &kp DEL

2
app/boards/arm/pillbug/pillbug.dts
View File

@@ -29,7 +29,7 @@
label = "Blue LED";
};
};
ext-power {
compatible = "zmk,ext-power-generic";
label = "EXT_POWER";

2
app/boards/arm/preonic/preonic_rev3.yaml
View File

@@ -16,4 +16,4 @@ supported:
- lsm303dlhc
- nvs
- can
- kscan
- kscan

2
app/boards/arm/s40nc/README.md
View File

@@ -1,9 +1,11 @@
# S40NC
![S40NC](https://i.imgur.com/fk8587n.jpg)
Shorty40NoCordy (S40NC) is a limited run 40% bluetooth keyboard originally made and sold by MechWild.
## Building S40NC ZMK firmware
```
west build -p -b s40nc
```

8
app/boards/arm/s40nc/s40nc.keymap
View File

@@ -17,7 +17,7 @@
/ {
keymap {
compatible = "zmk,keymap";
default_layer {
bindings = <
&kp ESC &kp Q &kp W &kp E &kp R &kp T &kp Y &kp U &kp I &kp O &kp P &kp BSPC
@@ -35,7 +35,7 @@
&trans &trans &trans &kp TAB &kp TAB &kp TAB &kp HOME &kp PG_DN &kp END
>;
};
raise_layer {
bindings = <
&kp TILDE &kp EXCL &kp AT &kp HASH &kp DLLR &kp PRCNT &kp CARET &kp AMPS &kp STAR &kp LPAR &kp RPAR &trans
@@ -44,7 +44,7 @@
&trans &trans &trans &kp TAB &kp TAB &kp TAB &kp HOME &kp PG_DN &kp END
>;
};
control_layer {
bindings = <
&bt BT_CLR &kp F1 &kp F2 &kp F3 &kp F4 &kp F5 &kp F6 &kp F7 &kp F8 &kp F9 &kp F10 &kp C_PP
@@ -55,4 +55,4 @@
};
};
};

8
app/boards/shields/bfo9000/README.md
View File

@@ -4,10 +4,10 @@ Customizable full-size split ortholinear.
## Features
* Compatible with MX-compatible, Alps-compatible, and Kailh Low-Profile Choc switches.
* Breakoff pieces to allow for 4 to 6 rows and 7 to 9 columns.
* RGB LED connections
- Compatible with MX-compatible, Alps-compatible, and Kailh Low-Profile Choc switches.
- Breakoff pieces to allow for 4 to 6 rows and 7 to 9 columns.
- RGB LED connections
## Hardware Notes
[Included default keymap](http://www.keyboard-layout-editor.com/#/gists/51293c31afcd5f1765e8f413a46bfcf8)
[Included default keymap](http://www.keyboard-layout-editor.com/#/gists/51293c31afcd5f1765e8f413a46bfcf8)

6
app/boards/shields/boardsource5x12/boardsource5x12.keymap
View File

@@ -3,7 +3,7 @@
*
* SPDX-License-Identifier: MIT
*/
#include <behaviors.dtsi>
#include <dt-bindings/zmk/keys.h>
#include <dt-bindings/zmk/bt.h>
@@ -28,7 +28,7 @@
&kp TAB &kp Q &kp W &kp E &kp R &kp T &kp Y &kp U &kp I &kp O &kp P &kp BSLH
&kp LSHFT &kp A &kp S &kp D &kp F &kp G &kp H &kp J &kp K &kp L &kp SEMI &kp SQT
&kp LCTRL &kp Z &kp X &kp C &kp V &kp B &kp N &kp M &kp COMMA &kp DOT &kp FSLH &kp RET
&mo 3 &kp LCTRL &kp LALT &kp LGUI &mo 1 &kp SPACE &kp SPACE &mo 2 &kp LEFT &kp DOWN &kp UP &kp RIGHT
&mo 3 &kp LCTRL &kp LALT &kp LGUI &mo 1 &kp SPACE &kp SPACE &mo 2 &kp LEFT &kp DOWN &kp UP &kp RIGHT
>;
};
@@ -44,7 +44,7 @@
&kp TILDE &kp EXCL &kp AT &kp HASH &kp DLLR &kp PRCNT &kp CARET &kp AMPS &kp ASTRK &kp LPAR &kp RPAR &kp DEL
&trans &kp F1 &kp F2 &kp F3 &kp F4 &kp F5 &kp F6 &kp UNDER &kp PLUS &kp LBRC &kp RBRC &kp PIPE
&trans &kp F7 &kp F8 &kp F9 &kp F10 &kp F11 &kp F12 &kp LS(NON_US_HASH) &kp LS(NON_US_BSLH) &trans &trans &trans
&trans &trans &trans &trans &trans &trans &trans &mo 3 &kp C_NEXT &kp C_VOL_DN &kp C_VOL_UP &kp C_PLAY_PAUSE
&trans &trans &trans &trans &trans &trans &trans &mo 3 &kp C_NEXT &kp C_VOL_DN &kp C_VOL_UP &kp C_PLAY_PAUSE
>;
};

2
app/boards/shields/boardsource5x12/boardsource5x12.overlay
View File

@@ -39,4 +39,4 @@
, <&pro_micro 6 GPIO_ACTIVE_HIGH>
;
};
};
};

8
app/boards/shields/chalice/chalice.keymap
View File

@@ -19,9 +19,9 @@
bindings = <
&kp ESC &kp GRAVE &kp N1 &kp N2 &kp N3 &kp N4 &kp N5 &kp N6 &kp N7 &kp N8 &kp N9 &kp N0 &kp MINUS &kp EQUAL &kp BSPC
&kp INSERT &kp TAB &kp Q &kp W &kp E &kp R &kp T &kp Y &kp U &kp I &kp O &kp P &kp LBKT &kp RBKT &kp BSLH
&kp DELETE &kp CAPS &kp A &kp S &kp D &kp F &kp G &kp H &kp J &kp K &kp L &kp SEMI &kp SQT &kp ENTER
&kp DELETE &kp CAPS &kp A &kp S &kp D &kp F &kp G &kp H &kp J &kp K &kp L &kp SEMI &kp SQT &kp ENTER
&kp LSHFT &kp Z &kp X &kp C &kp V &kp B &kp B &kp N &kp M &kp COMMA &kp DOT &kp SLASH &kp RSHFT &kp UP
&kp LCTRL &kp LALT &kp SPACE &mo 1 &kp SPACE &kp RALT &kp RCTRL &kp LEFT &kp DOWN &kp RIGHT
&kp LCTRL &kp LALT &kp SPACE &mo 1 &kp SPACE &kp RALT &kp RCTRL &kp LEFT &kp DOWN &kp RIGHT
>;
};
@@ -30,9 +30,9 @@
bindings = <
&bootloader &out OUT_TOG &kp F1 &kp F2 &kp F3 &kp F4 &kp F5 &kp F6 &kp F7 &kp F8 &kp F9 &kp F10 &kp F11 &kp F12 &trans
&trans &bt BT_CLR &rgb_ug RGB_TOG &rgb_ug RGB_HUD &rgb_ug RGB_HUI &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans
&trans &bt BT_SEL 0 &rgb_ug RGB_EFF &rgb_ug RGB_SAD &rgb_ug RGB_SAI &trans &trans &trans &trans &trans &trans &trans &trans &trans
&trans &bt BT_SEL 0 &rgb_ug RGB_EFF &rgb_ug RGB_SAD &rgb_ug RGB_SAI &trans &trans &trans &trans &trans &trans &trans &trans &trans
&bt BT_SEL 1 &rgb_ug RGB_EFR &rgb_ug RGB_BRD &rgb_ug RGB_BRI &trans &trans &trans &trans &trans &trans &trans &trans &trans &kp PG_UP
&bt BT_SEL 2 &trans &trans &trans &trans &trans &trans &kp HOME &kp PG_DN &kp END
&bt BT_SEL 2 &trans &trans &trans &trans &trans &trans &kp HOME &kp PG_DN &kp END
>;
};
};

4
app/boards/shields/chalice/chalice.overlay
View File

@@ -21,7 +21,7 @@
map = <
RC(0,0) RC(1,0) RC(0,1) RC(1,1) RC(0,2) RC(1,2) RC(0,3) RC(1,3) RC(0,4) RC(1,4) RC(0,5) RC(1,5) RC(0,6) RC(1,6) RC(4,6)
RC(2,0) RC(3,0) RC(2,1) RC(3,1) RC(2,2) RC(3,2) RC(2,3) RC(3,3) RC(2,4) RC(3,4) RC(2,5) RC(3,5) RC(2,6) RC(3,6) RC(5,6)
RC(4,0) RC(5,0) RC(4,1) RC(5,1) RC(4,2) RC(5,2) RC(4,3) RC(5,3) RC(4,4) RC(5,4) RC(4,5) RC(5,5) RC(6,6) RC(7,6)
RC(4,0) RC(5,0) RC(4,1) RC(5,1) RC(4,2) RC(5,2) RC(4,3) RC(5,3) RC(4,4) RC(5,4) RC(4,5) RC(5,5) RC(6,6) RC(7,6)
RC(6,0) RC(7,0) RC(6,1) RC(7,1) RC(6,2) RC(7,2) RC(6,3) RC(7,3) RC(6,4) RC(7,4) RC(6,5) RC(7,5) RC(8,6) RC(9,6)
RC(8,0) RC(9,1) RC(8,2) RC(9,2) RC(8,3) RC(9,3) RC(8,4) RC(9,4) RC(8,5) RC(9,5)
>;
@@ -35,7 +35,7 @@
map = <
RC(0,0) RC(1,0) RC(0,1) RC(1,1) RC(0,2) RC(1,2) RC(0,3) RC(1,3) RC(0,4) RC(1,4) RC(0,5) RC(1,5) RC(0,6) RC(1,6) RC(4,6) RC(8,1)
RC(2,0) RC(3,0) RC(2,1) RC(3,1) RC(2,2) RC(3,2) RC(2,3) RC(3,3) RC(2,4) RC(3,4) RC(2,5) RC(3,5) RC(2,6) RC(3,6) RC(5,6)
RC(4,0) RC(5,0) RC(4,1) RC(5,1) RC(4,2) RC(5,2) RC(4,3) RC(5,3) RC(4,4) RC(5,4) RC(4,5) RC(5,5) RC(6,6) RC(7,6)
RC(4,0) RC(5,0) RC(4,1) RC(5,1) RC(4,2) RC(5,2) RC(4,3) RC(5,3) RC(4,4) RC(5,4) RC(4,5) RC(5,5) RC(6,6) RC(7,6)
RC(6,0) RC(7,0) RC(6,1) RC(7,1) RC(6,2) RC(7,2) RC(6,3) RC(7,3) RC(6,4) RC(7,4) RC(6,5) RC(7,5) RC(8,6) RC(9,6)
RC(8,0) RC(9,1) RC(8,2) RC(9,2) RC(8,3) RC(9,3) RC(8,4) RC(9,4) RC(8,5) RC(9,5)
>;

2
app/boards/shields/clog/clog.dtsi
View File

@@ -27,7 +27,7 @@
kscan0: kscan {
compatible = "zmk,kscan-gpio-direct";
label = "KSCAN";
input-gpios
= <&pro_micro 18 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>
, <&pro_micro 19 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>

2
app/boards/shields/corne/corne.dtsi
View File

@@ -56,7 +56,7 @@ RC(2,1) RC(2,2) RC(2,3) RC(2,4) RC(2,5) RC(2,6) RC(2,7) RC(2,8) RC(2,9) RC(2,10
, <&pro_micro 6 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
, <&pro_micro 7 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
;
};
// TODO: per-key RGB node(s)?

12
app/boards/shields/eek/eek.keymap
View File

@@ -15,9 +15,9 @@
default {
// --------------------------------------------------------------------------------------------------------------------------------------------------------------------
// Q | W | E | R | T | | Y | U | I | O | P |
// A | S | D | F | G | | H | J | K | L | ; |
// Lsft/Z| X | C | V | B | | N | M | , | . |Rsft//|
// Q | W | E | R | T | | Y | U | I | O | P |
// A | S | D | F | G | | H | J | K | L | ; |
// Lsft/Z| X | C | V | B | | N | M | , | . |Rsft//|
// | LCTL | Bspc/LMOD | SPC | | Del/Num | Ent | Sym |
bindings = <
&kp Q &kp W &kp E &kp R &kp T &kp Y &kp U &kp I &kp O &kp P
@@ -28,7 +28,7 @@
};
numbers {
// --------------------------------------------------------------------------------------------------------------------------------------------------------------------
// 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 |
// 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 |
// TAB | BT_PRV | BT_NXT | VOL-| VOL+| | < | v | ∧ | > | ' |
// Lsft| BT_SEL0| BT_CLR | MUTE| | | HOME| END | PGUP| PGDN| Rsft|
// | LCTL | LMOD| LALT | | Num | | BL-reset |
@@ -41,8 +41,8 @@
};
symbols {
// --------------------------------------------------------------------------------------------------------------------------------------------------------------------
// ESC | F1 | F2 | F3 | F4 | | OUT_USB | OUT_BLE | | = | - |
// CAPS| F5 | F6 | F7 | F8 | | [ | ] | | ` | \ |
// ESC | F1 | F2 | F3 | F4 | | OUT_USB | OUT_BLE | | = | - |
// CAPS| F5 | F6 | F7 | F8 | | [ | ] | | ` | \ |
// LSFT| F9 | F10 | F11 | F12 | | | | | | RSFT |
// | LCTL | LMOD| LALT | | RESET | | SYM |
bindings = <

2
app/boards/shields/eek/eek.overlay
View File

@@ -20,7 +20,7 @@
RC(0,9) RC(0,8) RC(0,7) RC(0,6) RC(0,5) RC(0,4) RC(0,3) RC(0,2) RC(0,1) RC(0,0)
RC(1,9) RC(1,8) RC(1,7) RC(1,6) RC(1,5) RC(1,4) RC(1,3) RC(1,2) RC(1,1) RC(1,0)
RC(2,9) RC(2,8) RC(2,7) RC(2,6) RC(2,5) RC(2,4) RC(2,3) RC(2,2) RC(2,1) RC(2,0)
RC(3,7) RC(3,6) RC(3,5) RC(3,4) RC(3,3) RC(3,2)
RC(3,7) RC(3,6) RC(3,5) RC(3,4) RC(3,3) RC(3,2)
>;
};

2
app/boards/shields/elephant42/Kconfig.defconfig
View File

@@ -15,7 +15,7 @@ if SHIELD_ELEPHANT42_LEFT || SHIELD_ELEPHANT42_RIGHT
config ZMK_SPLIT
default y
if ZMK_DISPLAY
config I2C

4
app/boards/shields/elephant42/elephant42.dtsi
View File

@@ -3,7 +3,7 @@
*
* SPDX-License-Identifier: MIT
*/
#include <dt-bindings/zmk/matrix_transform.h>
/ {
@@ -36,7 +36,7 @@ RC(1,0) RC(1,1) RC(1,2) RC(1,3) RC(1,4) RC(1,5) RC(1,6) RC(1,7)
, <&pro_micro 7 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
;
};
};
};
&pro_micro_i2c {

4
app/boards/shields/elephant42/elephant42.keymap
View File

@@ -3,7 +3,7 @@
*
* SPDX-License-Identifier: MIT
*/
#include <behaviors.dtsi>
#include <dt-bindings/zmk/keys.h>
#include <dt-bindings/zmk/bt.h>
@@ -19,7 +19,7 @@
default_layer {
bindings = <
&lt ADJT ESC &kp Q &kp W &kp E &kp R &kp T &kp Y &kp U &kp I &kp O &kp P &kp DEL
&lt ADJT ESC &kp Q &kp W &kp E &kp R &kp T &kp Y &kp U &kp I &kp O &kp P &kp DEL
&mt LCTRL TAB &kp A &kp S &kp D &kp F &kp G &kp H &kp J &kp K &kp L &kp SEMI &kp SQT
&kp Z &kp X &kp C &kp V &kp B &kp N &kp M &kp COMMA &kp DOT &kp FSLH
&kp LSHFT &mo LOWR &kp LGUI &kp BSPC &kp SPACE &kp ENTER &mo RAIS &kp LALT

2
app/boards/shields/elephant42/elephant42_left.overlay
View File

@@ -3,7 +3,7 @@
*
* SPDX-License-Identifier: MIT
*/
#include "elephant42.dtsi"
&kscan0 {

2
app/boards/shields/elephant42/elephant42_right.overlay
View File

@@ -3,7 +3,7 @@
*
* SPDX-License-Identifier: MIT
*/
#include "elephant42.dtsi"
&default_transform {

2
app/boards/shields/helix/helix.dtsi
View File

@@ -42,6 +42,6 @@ RC(4,0) RC(4,1) RC(4,2) RC(4,3) RC(4,4) RC(4,5) RC(4,6) RC(4,7) RC(4,8) RC(4,9
, <&pro_micro 7 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
, <&pro_micro 8 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
;
};
};

4
app/boards/shields/helix/helix.keymap
View File

@@ -23,7 +23,7 @@ As such, those are in use within the default layer at this time.*/
/ {
keymap {
compatible = "zmk,keymap";
default_layer {
// ---------------------------------------------------------------------------------------------------------------------------------
// | GRAVE | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | DEL |
@@ -78,7 +78,7 @@ As such, those are in use within the default layer at this time.*/
// | | | | | | | | | | | | | | | |
bindings = <
&kp GRAVE &kp EXCL &kp AT &kp HASH &kp DLLR &kp PRCNT &kp CARET &kp AMPS &kp ASTRK &kp LPAR &kp RPAR &ext_power EP_TOG
&bt BT_CLR &bt BT_SEL 0 &bt BT_SEL 1 &bt BT_SEL 2 &bt BT_SEL 3 &bt BT_SEL 4 &rgb_ug RGB_EFF &rgb_ug RGB_HUI &rgb_ug RGB_SAI &rgb_ug RGB_SPI &rgb_ug RGB_BRI &rgb_ug RGB_TOG
&bt BT_CLR &bt BT_SEL 0 &bt BT_SEL 1 &bt BT_SEL 2 &bt BT_SEL 3 &bt BT_SEL 4 &rgb_ug RGB_EFF &rgb_ug RGB_HUI &rgb_ug RGB_SAI &rgb_ug RGB_SPI &rgb_ug RGB_BRI &rgb_ug RGB_TOG
&bt BT_NXT &out OUT_TOG &out OUT_USB &out OUT_BLE &trans &trans &rgb_ug RGB_EFR &rgb_ug RGB_HUD &rgb_ug RGB_SAD &rgb_ug RGB_SPD &rgb_ug RGB_BRD &trans
&bt BT_PRV &trans &trans &trans &trans &trans &kp LBRC &kp RBRC &trans &trans &trans &trans &trans &trans
&trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans

2
app/boards/shields/helix/helix_left.overlay
View File

@@ -3,7 +3,7 @@
*
* SPDX-License-Identifier: MIT
*/
#include "helix.dtsi"
&kscan0 {

2
app/boards/shields/hummingbird/hummingbird.overlay
View File

@@ -49,7 +49,7 @@
, <&xiao_d 5 GPIO_ACTIVE_HIGH>
;
};
};
&xiao_spi { status = "disabled"; };

2
app/boards/shields/iris/Kconfig.defconfig
View File

@@ -15,5 +15,5 @@ if SHIELD_IRIS_LEFT || SHIELD_IRIS_RIGHT
config ZMK_SPLIT
default y
endif

2
app/boards/shields/iris/iris.dtsi
View File

@@ -42,6 +42,6 @@ RC(3,0) RC(3,1) RC(3,2) RC(3,3) RC(3,4) RC(3,5) RC(4,2) RC(4,9) RC(3,6) RC(3,7)
, <&pro_micro 0 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
, <&pro_micro 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
;
};
};

2
app/boards/shields/jian/jian.dtsi
View File

@@ -71,6 +71,6 @@
, <&pro_micro 15 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
, <&pro_micro 14 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
;
};
};

2
app/boards/shields/jiran/jiran.dtsi
View File

@@ -77,6 +77,6 @@
, <&pro_micro 20 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
, <&pro_micro 19 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
;
};
};

2
app/boards/shields/jorne/Kconfig.defconfig
View File

@@ -13,7 +13,7 @@ if SHIELD_JORNE_LEFT || SHIELD_JORNE_RIGHT
config ZMK_SPLIT
default y
if ZMK_DISPLAY
config I2C

2
app/boards/shields/jorne/jorne.dtsi
View File

@@ -72,7 +72,7 @@ RC(2,1) RC(2,2) RC(2,3) RC(2,4) RC(2,5) RC(2,6) RC(2,7) RC(2,8) RC(2,9) RC(2,10
, <&pro_micro 6 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
, <&pro_micro 7 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
;
};
// TODO: per-key RGB node(s)?

2
app/boards/shields/kyria/Kconfig.defconfig
View File

@@ -13,7 +13,7 @@ if SHIELD_KYRIA
config ZMK_SPLIT
default y
if ZMK_DISPLAY
config I2C

2
app/boards/shields/kyria/kyria_common.dtsi
View File

@@ -17,7 +17,7 @@
compatible = "zmk,kscan-gpio-matrix";
label = "KSCAN";
diode-direction = "col2row";
diode-direction = "col2row";
};
left_encoder: encoder_left {

2
app/boards/shields/leeloo/Kconfig.defconfig
View File

@@ -8,7 +8,7 @@ config ZMK_KEYBOARD_NAME
config ZMK_SPLIT_ROLE_CENTRAL
default y
endif
if SHIELD_LEELOO_LEFT || SHIELD_LEELOO_RIGHT

19
app/boards/shields/leeloo/README.md
View File

@@ -6,20 +6,22 @@ Keyboard Designer: [clicketysplit.ca](https://clicketysplit.ca)
GitHub: [ClicketySplit](https://github.com/ClicketySplit)
Hardware Supported: Pro Micro, Elite-C, nice!nano v2
Albeit, there is no doubt where Leeloo's heritage is derived from—Lily58, and Corne. It is not a copy-paste-modify implementation.
Albeit, there is no doubt where Leeloo's heritage is derived from—Lily58, and Corne. It is not a copy-paste-modify implementation.
Leeloo has been designed from scratch; everything from the schematic to its PCB footprints, and column stagger. There are some subtle differences that may not be apparent; however, its subtle changes enable an interesting future.
Features:
* 4x6x5m Split Keyboard
* Support for MX/Box or Low Profile Choc switches.
* 90% of the switches are socketed; with the exception to the rotary encoder positions—6 positions require soldering.
* Support for 128x32 OLED Displays.
* The option to select one of three positions for an EC11 rotary encoder on each half.
* Support for Alps Alpine Micro Switch
* Support for 3.7v 301230 LiPo Battery
- 4x6x5m Split Keyboard
- Support for MX/Box or Low Profile Choc switches.
- 90% of the switches are socketed; with the exception to the rotary encoder positions—6 positions require soldering.
- Support for 128x32 OLED Displays.
- The option to select one of three positions for an EC11 rotary encoder on each half.
- Support for Alps Alpine Micro Switch
- Support for 3.7v 301230 LiPo Battery
# Building Your Firmware
ZMK Firmware: [Introduction to ZMK](https://zmk.dev/docs/)
Installation: [Installing ZMK](https://zmk.dev/docs/user-setup)
Customization: [Customizing ZMK](https://zmk.dev/docs/customization)
@@ -36,6 +38,7 @@ Build command for your custom keymap of Leeloo:
west build -d build/left -p -b nice_nano_v2 -- -DSHIELD=leeloo_left -DZMK_CONFIG="C:/dev/zmk/[yourName]/leeloo/config"
# Support
If you have any questions with regards to Leeloo, please [Contact Us](https://clicketysplit.ca/pages/contact-us).
Clickety Split

2
app/boards/shields/lily58/lily58.dtsi
View File

@@ -43,7 +43,7 @@ RC(3,0) RC(3,1) RC(3,2) RC(3,3) RC(3,4) RC(3,5) RC(4,5) RC(4,6) RC(3,6) RC(3,7)
, <&pro_micro 8 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
, <&pro_micro 9 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
;
};
left_encoder: encoder_left {

2
app/boards/shields/lotus58/Kconfig.defconfig
View File

@@ -8,7 +8,7 @@ config ZMK_KEYBOARD_NAME
config ZMK_SPLIT_ROLE_CENTRAL
default y
endif
if SHIELD_LOTUS58_LEFT || SHIELD_LOTUS58_RIGHT

2
app/boards/shields/lotus58/lotus58.dtsi
View File

@@ -27,7 +27,7 @@ RC(0,0) RC(0,1) RC(0,2) RC(0,3) RC(0,4) RC(0,5) RC(0,6) RC(0,7
RC(1,0) RC(1,1) RC(1,2) RC(1,3) RC(1,4) RC(1,5) RC(1,6) RC(1,7) RC(1,8) RC(1,9) RC(1,10) RC(1,11)
RC(2,0) RC(2,1) RC(2,2) RC(2,3) RC(2,4) RC(2,5) RC(4,0) RC(4,11) RC(2,6) RC(2,7) RC(2,8) RC(2,9) RC(2,10) RC(2,11)
RC(3,0) RC(3,1) RC(3,2) RC(3,3) RC(3,4) RC(3,5) RC(4,5) RC(4,6) RC(3,6) RC(3,7) RC(3,8) RC(3,9) RC(3,10) RC(3,11)
RC(4,1) RC(4,2) RC(4,3) RC(4,4) RC(4,7) RC(4,8) RC(4,9) RC(4,10)
RC(4,1) RC(4,2) RC(4,3) RC(4,4) RC(4,7) RC(4,8) RC(4,9) RC(4,10)
>;
};

10
app/boards/shields/lotus58/lotus58.keymap
View File

@@ -17,7 +17,7 @@
key-positions = <24 52>;
layers = <0>;
bindings = <&kp LGUI>;
};
};
};
behaviors {
@@ -59,7 +59,7 @@
&kp TAB &kp Q &kp W &kp E &kp R &kp T &kp Y &kp U &kp I &kp O &kp P &kp LBKT
&kp LSHFT &kp A &sleft &kp D &fright &kp G &sys_reset &sys_reset &kp H &kp J &kp K &kp L &kp SEMI &mt RSHFT SQT
&kp LCTRL &kp Z &kp X &kp C &kp V &kp B &kp C_MUTE &kp C_PP &kp N &kp M &kp COMMA &kp DOT &kp FSLH &mt RCTRL BSLH
&lt 2 RET &kp LALT &kp SPACE &lt 1 DEL &lt 2 RET &kp BSPC &lt 1 RBKT &kp LGUI
&lt 2 RET &kp LALT &kp SPACE &lt 1 DEL &lt 2 RET &kp BSPC &lt 1 RBKT &kp LGUI
>;
sensor-bindings = <&inc_dec_kp C_VOL_DN C_VOL_UP &inc_dec_kp PG_UP PG_DN>;
@@ -71,7 +71,7 @@
// | | ! | HOME| ^ | END | % | | VOL^ | PGUP | INS | ^ | PSCR | - |
// | | # | <- | v | -> | $ | | | | VOLv | <- | ^ | -> | ~ | _ |
// | | @ | - | ( | ) | & | | | | MUTE | PGDN | v | : | * | | |
// | F11 | | | | | | | | F12 |
// | F11 | | | | | | | | F12 |
bindings = <
&kp GRAVE &kp F1 &kp F2 &kp F3 &kp F4 &kp F5 &kp F6 &kp F7 &kp F8 &kp F9 &kp F10 &kp PLUS
&trans &kp EXCL &kp HOME &kp UP &kp END &kp PRCNT &kp C_VOL_UP &kp PG_UP &kp INS &kp CARET &kp PSCRN &kp MINUS
@@ -89,13 +89,13 @@
// | | INS | PSCR | GUI | RESET | | | PGUP | | ^ | | | |
// | | ALT | CTRL | SHIFT | FLASH | CAPS | | | | PGDN | <- | v | -> | DEL | BSPC |
// | | UNDO | CUT | COPY | PASTE | | | | | | |> | <|<| | |>|> | | |
// | | | | | | | | | |
// | | | | | | | | | |
bindings = <
&bt BT_CLR &bt BT_SEL 0 &bt BT_SEL 1 &bt BT_SEL 2 &bt BT_SEL 3 &bt BT_SEL 4 &out OUT_TOG &out OUT_USB &out OUT_BLE &trans &sys_reset &bootloader
&trans &kp INS &kp PSCRN &kp K_CMENU &sys_reset &trans &kp PG_UP &trans &kp UP &trans &trans &trans
&trans &kp LALT &kp LCTRL &kp LSHFT &bootloader &kp CLCK &trans &trans &kp PG_DN &kp LEFT &kp DOWN &kp RIGHT &kp DEL &kp BSPC
&trans &kp K_UNDO &kp K_CUT &kp K_COPY &kp K_PASTE &trans &trans &trans &trans &kp C_PP &kp C_PREV &kp C_NEXT &trans &trans
&trans &trans &trans &trans &trans &trans &trans &trans
&trans &trans &trans &trans &trans &trans &trans &trans
>;
sensor-bindings = <&inc_dec_kp C_VOL_DN C_VOL_UP &inc_dec_kp PG_UP PG_DN>;

2
app/boards/shields/lotus58/lotus58_left.overlay
View File

@@ -8,7 +8,7 @@
&kscan0 {
col-gpios
= <&pro_micro 15 GPIO_ACTIVE_HIGH>
= <&pro_micro 15 GPIO_ACTIVE_HIGH>
, <&pro_micro 16 GPIO_ACTIVE_HIGH>
, <&pro_micro 14 GPIO_ACTIVE_HIGH>
, <&pro_micro 10 GPIO_ACTIVE_HIGH>

2
app/boards/shields/microdox/Kconfig.defconfig
View File

@@ -15,7 +15,7 @@ if SHIELD_MICRODOX_LEFT || SHIELD_MICRODOX_RIGHT
config ZMK_SPLIT
default y
if ZMK_DISPLAY
config I2C

2
app/boards/shields/microdox/microdox.dtsi
View File

@@ -40,7 +40,7 @@ RC(2,0) RC(2,1) RC(2,2) RC(2,3) RC(2,4) RC(2,5) RC(2,6) RC(2,7) RC(2,8) RC(2,9)
, <&pro_micro 8 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
, <&pro_micro 9 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
;
};
// TODO: per-key RGB node(s)?

26
app/boards/shields/murphpad/murphpad.keymap
View File

@@ -44,7 +44,7 @@
bindings = <&bt BT_NXT>;
};
};
sensors {
compatible = "zmk,keymap-sensors";
sensors = <&encoder_1 &encoder_2>;
@@ -57,29 +57,29 @@
default_layer {
label = "default layer";
bindings = <
&bt BT_CLR &kp TAB &kp F5 &kp LC(LA(C)) &kp LG(D)
&rgb_ug RGB_TOG &kp ESC &kp KP_DIVIDE &kp KP_MULTIPLY &kp KP_MINUS
&rgb_ug RGB_EFF &kp KP_N7 &kp KP_N8 &kp KP_N9 &kp KP_PLUS
&bt BT_CLR &kp TAB &kp F5 &kp LC(LA(C)) &kp LG(D)
&rgb_ug RGB_TOG &kp ESC &kp KP_DIVIDE &kp KP_MULTIPLY &kp KP_MINUS
&rgb_ug RGB_EFF &kp KP_N7 &kp KP_N8 &kp KP_N9 &kp KP_PLUS
&kp C_MUTE &kp KP_N4 &kp KP_N5 &kp KP_N6 &trans
&mo 1 &kp KP_N1 &kp KP_N2 &kp KP_N3 &kp KP_ENTER
&kp BSPC &kp KP_N0 &trans &kp KP_DOT &trans
>;
sensor-bindings = <&inc_dec_kp C_VOL_UP C_VOL_DN &inc_dec_kp PG_UP PG_DN>;
};
};
fn_layer {
label = "fn layer";
bindings = <
&trans &trans &trans &trans &trans
&trans &kp KP_NUM &trans &trans &trans
&trans &trans &trans &trans &trans
&bt BT_CLR &trans &trans &trans &trans
&trans &trans &trans &trans &trans
&kp DEL &trans &trans &trans &trans
>;
&trans &kp KP_NUM &trans &trans &trans
&trans &trans &trans &trans &trans
&bt BT_CLR &trans &trans &trans &trans
&trans &trans &trans &trans &trans
&kp DEL &trans &trans &trans &trans
>;
sensor-bindings = <&inc_dec_kp PG_UP PG_DN &inc_dec_kp C_VOL_UP C_VOL_DN>;
};
};
};

2
app/boards/shields/murphpad/murphpad.overlay
View File

@@ -42,7 +42,7 @@
resolution = <4>;
status = "disabled";
};
encoder_2: encoder_2 {
compatible = "alps,ec11";
label = "Encoder 2";

4
app/boards/shields/naked60/naked60.keymap
View File

@@ -28,7 +28,7 @@
&kp TAB &kp Q &kp W &kp E &kp R &kp T &kp Y &kp U &kp I &kp O &kp P &kp BSLH
&kp LSHFT &kp A &kp S &kp D &kp F &kp G &kp H &kp J &kp K &kp L &kp SEMI &kp SQT
&kp LCTRL &kp Z &kp X &kp C &kp V &kp B &kp N &kp M &kp COMMA &kp DOT &kp FSLH &kp RET
&mo 3 &kp LCTRL &kp LALT &kp LGUI &mo 1 &kp SPACE &kp SPACE &mo 2 &kp LEFT &kp DOWN &kp UP &kp RIGHT
&mo 3 &kp LCTRL &kp LALT &kp LGUI &mo 1 &kp SPACE &kp SPACE &mo 2 &kp LEFT &kp DOWN &kp UP &kp RIGHT
>;
};
@@ -44,7 +44,7 @@
&kp TILDE &kp EXCL &kp AT &kp HASH &kp DLLR &kp PRCNT &kp CARET &kp AMPS &kp ASTRK &kp LPAR &kp RPAR &kp DEL
&trans &kp F1 &kp F2 &kp F3 &kp F4 &kp F5 &kp F6 &kp UNDER &kp PLUS &kp LBRC &kp RBRC &kp PIPE
&trans &kp F7 &kp F8 &kp F9 &kp F10 &kp F11 &kp F12 &kp LS(NON_US_HASH) &kp LS(NON_US_BSLH) &trans &trans &trans
&trans &trans &trans &trans &trans &trans &trans &mo 3 &kp C_NEXT &kp C_VOL_DN &kp C_VOL_UP &kp C_PLAY_PAUSE
&trans &trans &trans &trans &trans &trans &trans &mo 3 &kp C_NEXT &kp C_VOL_DN &kp C_VOL_UP &kp C_PLAY_PAUSE
>;
};

2
app/boards/shields/nibble/nibble.keymap
View File

@@ -32,7 +32,7 @@
};
function_layer {
label = "Function";
sensor-bindings = <&inc_dec_kp C_VOLUME_UP C_VOLUME_DOWN>;
bindings = <

2
app/boards/shields/nibble/nibble.overlay
View File

@@ -51,7 +51,7 @@
RC(1,0) RC(1,1) RC(1,2) RC(1,3) RC(1,4) RC(1,5) RC(1,6) RC(1,7) RC(1,8) RC(1,9) RC(1,10) RC(1,11) RC(1,12) RC(1,13) RC(1,14) RC(1,15)
RC(2,0) RC(2,1) RC(2,2) RC(2,3) RC(2,4) RC(2,5) RC(2,6) RC(2,7) RC(2,8) RC(2,9) RC(2,10) RC(2,11) RC(2,12) RC(2,14) RC(2,15)
RC(3,0) RC(3,1) RC(0,0) RC(3,2) RC(3,3) RC(3,4) RC(3,5) RC(3,6) RC(3,7) RC(3,8) RC(3,9) RC(3,10) RC(3,11) RC(3,12) RC(3,14) RC(3,15)
RC(4,0) RC(4,1) RC(4,2) RC(4,3) RC(4,6) RC(4,9) RC(4,10) RC(4,11) RC(4,12) RC(4,14) RC(4,15)
RC(4,0) RC(4,1) RC(4,2) RC(4,3) RC(4,6) RC(4,9) RC(4,10) RC(4,11) RC(4,12) RC(4,14) RC(4,15)
>;
};
};

2
app/boards/shields/nice_view/README.md
View File

@@ -2,4 +2,4 @@
The nice!view is a low power, high refresh rate display meant to replace I2C OLEDs traditionally used.
This shield requires that an `&nice_view_spi` labelled SPI bus is provided with *at least* MOSI, SCK, and CS pins defined.
This shield requires that an `&nice_view_spi` labelled SPI bus is provided with _at least_ MOSI, SCK, and CS pins defined.

2
app/boards/shields/nice_view_adapter/README.md
View File

@@ -2,7 +2,7 @@
This shield is used as an adapter between the nice!view and existing shields/boards that expose an I2C OLED header.
To use this shield, you should add this shield to your list of shields *before* `nice_view`.
To use this shield, you should add this shield to your list of shields _before_ `nice_view`.
The nice!view will use the SDA/SCL pins of the OLED, and then the adapter expects a final pin to be "bodged" from your microcontroller to the nice!view CS pin. This adapter assumes that the CS pin bodged is the `&pro_micro 1` pin or "D1", which is the top left pin when looking at the front of the board. If you can't use this pin, you'll need to override the `cs-gpios` for the `&nice_view_spi` bus (in your `zmk-config` keymap for example) or you will want to define your own `&nice_view_spi` bus without using this adapter.

12
app/boards/shields/pancake/pancake.keymap
View File

@@ -20,7 +20,7 @@
default_layer {
bindings = <
&kp ESC &kp Q &kp W &kp E &kp R &kp T &kp Y &kp U &kp I &kp O &kp P &kp BSPC
&kp ESC &kp Q &kp W &kp E &kp R &kp T &kp Y &kp U &kp I &kp O &kp P &kp BSPC
&kp TAB &kp A &kp S &kp D &kp F &kp G &kp H &kp J &kp K &kp L &kp SQT &kp SEMI
&kp LSHFT &kp Z &kp X &kp C &kp V &kp B &kp N &kp M &kp COMMA &kp DOT &kp UP &kp ENTER
&kp LCTRL &kp LALT &kp LGUI &mo FNC &mo LWR &kp SPACE &kp SPACE &mo RSE &kp SLASH &kp LEFT &kp DOWN &kp RIGHT
@@ -32,7 +32,7 @@
&kp TILDE &kp EXCL &kp AT &kp HASH &kp DLLR &kp PRCNT &kp CARET &kp AMPS &kp STAR &kp LPAR &kp RPAR &kp BSPC
&trans &trans &trans &trans &trans &trans &trans &trans &kp UNDER &kp PLUS &trans &trans
&trans &trans &trans &trans &trans &trans &trans &trans &kp LBRC &kp RBRC &kp C_VOL_UP &trans
&trans &trans &trans &trans &trans &trans &trans &trans &kp QMARK &trans &kp C_VOL_DN &trans
&trans &trans &trans &trans &trans &trans &trans &trans &kp QMARK &trans &kp C_VOL_DN &trans
>;
};
@@ -41,8 +41,8 @@
&kp GRAVE &kp N1 &kp N2 &kp N3 &kp N4 &kp N5 &kp N6 &kp N7 &kp N8 &kp N9 &kp N0 &kp BSPC
&trans &trans &trans &trans &trans &trans &trans &trans &kp MINUS &kp EQUAL &trans &kp BSLH
&trans &trans &trans &trans &trans &trans &trans &trans &kp LBKT &kp RBKT &kp C_VOL_UP &trans
&trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &kp C_VOL_DN &trans
>;
&trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &kp C_VOL_DN &trans
>;
};
function_layer {
@@ -50,8 +50,8 @@
&bootloader &kp F1 &kp F2 &kp F3 &kp F4 &kp F5 &kp F6 &kp F7 &kp F8 &kp F9 &kp F10 &trans
&trans &trans &trans &trans &trans &trans &trans &trans &kp MINUS &kp F11 &kp F12 &trans
&bt BT_CLR &bt BT_SEL 0 &bt BT_SEL 1 &bt BT_SEL 2 &bt BT_SEL 3 &bt BT_SEL 4 &trans &trans &trans &trans &trans &trans
&out OUT_BLE &out OUT_USB &out OUT_TOG &trans &trans &trans &trans &trans &trans &trans &trans &trans
>;
&out OUT_BLE &out OUT_USB &out OUT_TOG &trans &trans &trans &trans &trans &trans &trans &trans &trans
>;
};
};
};

4
app/boards/shields/pancake/pancake.overlay
View File

@@ -14,7 +14,7 @@
label = "KSCAN";
diode-direction = "col2row";
col-gpios
col-gpios
= <&pro_micro 21 GPIO_ACTIVE_HIGH>
, <&pro_micro 20 GPIO_ACTIVE_HIGH>
, <&pro_micro 19 GPIO_ACTIVE_HIGH>
@@ -28,7 +28,7 @@
, <&pro_micro 3 GPIO_ACTIVE_HIGH>
, <&pro_micro 2 GPIO_ACTIVE_HIGH>
;
row-gpios
= <&pro_micro 15 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
, <&pro_micro 14 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>

2
app/boards/shields/qaz/qaz.overlay
View File

@@ -49,5 +49,5 @@
, <&pro_micro 3 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
;
};
};

4
app/boards/shields/quefrency/Kconfig.defconfig
View File

@@ -1,7 +1,7 @@
# Copyright (c) 2020 The ZMK Contributors
# SPDX-License-Identifier: MIT
if SHIELD_QUEFRENCY_LEFT
config ZMK_KEYBOARD_NAME

10
app/boards/shields/quefrency/quefrency.dtsi
View File

@@ -13,7 +13,7 @@
zmk,matrix_transform = &default_transform;
};
/*
/*
* This transform correspondsto the 60% left without macro keypad and 65% right, even this
* combination of PCBs can have keys in different locations based on configuration.
*/
@@ -22,11 +22,11 @@
columns = <15>;
rows = <6>;
map = <
RC(0,0) RC(0,1) RC(0,2) RC(0,3) RC(0,4) RC(0,5) RC(0,6) /**/ RC(0,7) RC(0,8) RC(0,9) RC(0,10) RC(0,11) RC(0,12) RC(0,14) RC(5,13)
RC(0,0) RC(0,1) RC(0,2) RC(0,3) RC(0,4) RC(0,5) RC(0,6) /**/ RC(0,7) RC(0,8) RC(0,9) RC(0,10) RC(0,11) RC(0,12) RC(0,14) RC(5,13)
RC(1,0) RC(1,1) RC(1,2) RC(1,3) RC(1,4) RC(1,5) /**/RC(1,7) RC(1,8) RC(1,9) RC(1,10) RC(1,11) RC(1,12) RC(1,13) RC(1,14) RC(5,14)
RC(2,0) RC(2,1) RC(2,2) RC(2,3) RC(2,4) RC(2,5) /**/ RC(2,7) RC(2,8) RC(2,9) RC(2,10) RC(2,11) RC(2,12) RC(2,14) RC(2,13)
RC(3,0) RC(3,2) RC(3,3) RC(3,4) RC(3,5) RC(3,6) /**/ RC(3,7) RC(3,8) RC(3,9) RC(3,10) RC(3,12) RC(3,13) RC(3,14) RC(3,11)
RC(4,0) RC(4,1) RC(4,2) RC(4,4) RC(4,6) /**/ RC(4,7) RC(4,10) RC(4,11) RC(4,12) RC(4,13) RC(4,14) RC(4,9)
RC(2,0) RC(2,1) RC(2,2) RC(2,3) RC(2,4) RC(2,5) /**/ RC(2,7) RC(2,8) RC(2,9) RC(2,10) RC(2,11) RC(2,12) RC(2,14) RC(2,13)
RC(3,0) RC(3,2) RC(3,3) RC(3,4) RC(3,5) RC(3,6) /**/ RC(3,7) RC(3,8) RC(3,9) RC(3,10) RC(3,12) RC(3,13) RC(3,14) RC(3,11)
RC(4,0) RC(4,1) RC(4,2) RC(4,4) RC(4,6) /**/ RC(4,7) RC(4,10) RC(4,11) RC(4,12) RC(4,13) RC(4,14) RC(4,9)
>;
};
};

2
app/boards/shields/quefrency/quefrency_right.overlay
View File

@@ -12,7 +12,7 @@
/ {
/* This kscan is for the 65% right half the 60% right half
/* This kscan is for the 65% right half the 60% right half
* may require different column and row pins
*/
kscan0: kscan {

4
app/boards/shields/redox/redox.dtsi
View File

@@ -3,7 +3,7 @@
*
* SPDX-License-Identifier: MIT
*/
#include <dt-bindings/zmk/matrix_transform.h>
/ {
@@ -42,7 +42,7 @@ RC(4,0) RC(4,1) RC(4,2) RC(4,3) RC(4,4) RC(4,5) RC(4,6) RC(4,7) RC(4,8)
, <&pro_micro 8 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
, <&pro_micro 9 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
;
};
};

4
app/boards/shields/redox/redox.keymap
View File

@@ -30,7 +30,7 @@
>;
};
lower_layer {
// --------------------------------------------------------------------------------------------------------------------------
// | ESC | 1 | 2 | 3 | 4 | 5 | --- | 6 | 7 | 8 | 9 | 0 | DEL |
@@ -62,7 +62,7 @@
&trans &trans &trans &mo 3 &trans &mo 3 &trans &trans &trans &trans &trans &trans &trans &trans
>;
};
adjust_layer {
// -----------------------------------------------------------------------------------------
// | F1 | F2 | F3 | F4 | F5 | F6 | --- | F7 | F8 | F9 | F10 | F11 | F12 |

2
app/boards/shields/snap/Kconfig.defconfig
View File

@@ -15,7 +15,7 @@ if SHIELD_SNAP_LEFT || SHIELD_SNAP_RIGHT
config ZMK_SPLIT
default y
if ZMK_DISPLAY
config I2C

2
app/boards/shields/snap/snap.dtsi
View File

@@ -38,7 +38,7 @@
// R3C07L | R3C06L | R3C05L | R3C04L | R3C03L | R3C02L | R3C00L | | R3C15R | R3C14R | R3C13R | R3C12R | R3C11R | R3C10R | R3C09R | R4C08R |
// R4C07L | R4C06L | R4C05L | R4C04L | R4C03L | R4C02L | R4C01L | R4C00L | | R4C15R | R4C14R | R4C13R | R4C12R | R4C11R | R4C10R | R4C09R | R5C08R |
// R5C07L | R5C06L | R5C05L | R5C04L | R5C02L | R5C00L | | R5C15R | R5C14R | R5C13R | R5C12R | R5C11R | R5C10R | R5C09R |
map = <
RC(0,6) RC(0,5) RC(0,4) RC(0,3) RC(0,2) RC(0,1) RC(0,0) RC(0,15) RC(0,14) RC(0,13) RC(0,12) RC(0,11) RC(0,10) RC(0,9) RC(0,8)
RC(1,7) RC(1,6) RC(1,5) RC(1,4) RC(1,3) RC(1,2) RC(1,1) RC(1,0) RC(1,15) RC(1,14) RC(1,13) RC(1,12) RC(1,11) RC(1,10) RC(1,9) RC(1,8) RC(1,16)

2
app/boards/shields/snap/snap.keymap
View File

@@ -37,7 +37,7 @@
bindings = <
&bootloader &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &bootloader
&kp C_PP &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &kp C_PP
&trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans
&trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans
&trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans
&trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &rgb_ug RGB_TOG &rgb_ug RGB_BRI &rgb_ug RGB_EFF
&trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &rgb_ug RGB_HUD &rgb_ug RGB_BRD &rgb_ug RGB_HUI

2
app/boards/shields/snap/snap_left.overlay
View File

@@ -24,7 +24,7 @@
&left_encoder {
a-gpios = <&pro_micro 15 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>;
b-gpios = <&pro_micro 14 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>;
b-gpios = <&pro_micro 14 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>;
status = "okay";
};

2
app/boards/shields/snap/snap_right.overlay
View File

@@ -46,6 +46,6 @@ kscan_direct: kscan_direct {
&right_encoder {
a-gpios = <&pro_micro 9 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>;
b-gpios = <&pro_micro 8 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>;
b-gpios = <&pro_micro 8 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>;
status = "okay";
};

2
app/boards/shields/sofle/Kconfig.defconfig
View File

@@ -8,7 +8,7 @@ config ZMK_KEYBOARD_NAME
config ZMK_SPLIT_ROLE_CENTRAL
default y
endif
if SHIELD_SOFLE_LEFT || SHIELD_SOFLE_RIGHT

2
app/boards/shields/splitkb_aurora_corne/Kconfig.defconfig
View File

@@ -21,7 +21,7 @@ config ZMK_RGB_UNDERGLOW
select SPI
config ZMK_DISPLAY
if ZMK_DISPLAY
config SSD1306

2
app/boards/shields/splitkb_aurora_corne/splitkb_aurora_corne_left.overlay
View File

@@ -24,7 +24,7 @@
, <&pro_micro 9 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>
;
col-gpios
col-gpios
= <&pro_micro 16 GPIO_ACTIVE_HIGH>
, <&pro_micro 10 GPIO_ACTIVE_HIGH>
, <&pro_micro 14 GPIO_ACTIVE_HIGH>

2
app/boards/shields/splitkb_aurora_corne/splitkb_aurora_corne_right.overlay
View File

@@ -24,7 +24,7 @@
, <&pro_micro 10 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>
;
col-gpios
col-gpios
= <&pro_micro 9 GPIO_ACTIVE_HIGH>
, <&pro_micro 8 GPIO_ACTIVE_HIGH>
, <&pro_micro 7 GPIO_ACTIVE_HIGH>

2
app/boards/shields/splitkb_aurora_lily58/Kconfig.defconfig
View File

@@ -21,7 +21,7 @@ config ZMK_RGB_UNDERGLOW
select SPI
config ZMK_DISPLAY
if ZMK_DISPLAY
config SSD1306

2
app/boards/shields/splitkb_aurora_lily58/splitkb_aurora_lily58_left.overlay
View File

@@ -25,7 +25,7 @@
, <&pro_micro 8 GPIO_ACTIVE_HIGH>
;
col-gpios
col-gpios
= <&pro_micro 9 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>
, <&pro_micro 18 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>
, <&pro_micro 15 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>

2
app/boards/shields/splitkb_aurora_lily58/splitkb_aurora_lily58_right.overlay
View File

@@ -25,7 +25,7 @@
, <&pro_micro 10 GPIO_ACTIVE_HIGH>
;
col-gpios
col-gpios
= <&pro_micro 9 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>
, <&pro_micro 8 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>
, <&pro_micro 7 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>

2
app/boards/shields/splitkb_aurora_sweep/Kconfig.defconfig
View File

@@ -21,7 +21,7 @@ config ZMK_RGB_UNDERGLOW
select SPI
config ZMK_DISPLAY
if ZMK_DISPLAY
config SSD1306

52
app/boards/shields/splitkb_aurora_sweep/splitkb_aurora_sweep.keymap
View File

@@ -14,7 +14,7 @@
// tapping_term_ms = <200>;
};
/ {
/ {
combos {
compatible = "zmk,combos";
@@ -23,80 +23,80 @@
key-positions = <0 1>;
bindings = <&kp ESC>;
};
combo_tab {
timeout-ms = <50>;
key-positions = <10 11>;
bindings = <&kp TAB>;
};
combo_ralt {
timeout-ms = <50>;
key-positions = <17 16>;
bindings = <&kp RALT>;
};
combo_lalt {
timeout-ms = <50>;
key-positions = <11 12>;
bindings = <&kp LALT>;
};
combo_lgui {
timeout-ms = <50>;
key-positions = <12 13>;
bindings = <&kp LGUI>;
};
combo_rgui {
timeout-ms = <50>;
key-positions = <17 18>;
bindings = <&kp RGUI>;
};
};
keymap {
compatible = "zmk,keymap";
default_layer {
bindings = <
&kp Q &kp W &kp E &kp R &kp T &kp Y &kp U &kp I &kp O &kp P
&kp Q &kp W &kp E &kp R &kp T &kp Y &kp U &kp I &kp O &kp P
&kp A &kp S &kp D &kp F &kp G &kp H &kp J &kp K &kp L &kp QUOT
&mt LSFT Z &kp X &kp C &kp V &kp B &kp N &kp M &kp CMMA &kp DOT &mt LSFT RET
&mo 1 &kp LCTL &kp SPC &mo 2
&mo 1 &kp LCTL &kp SPC &mo 2
>;
};
left_layer {
bindings = <
&kp NUM_1 &kp NUM_2 &kp NUM_3 &kp NUM_4 &kp NUM_5 &kp NUM_6 &kp NUM_7 &kp NUM_8 &kp NUM_9 &kp NUM_0
&kp TAB &kp LC(S) &kp DQT &kp PIPE2 &kp HASH &kp MINUS &kp EQL &kp LBKT &kp RBKT &kp DEL
&kp ESC &kp TILDE &kp NON_US_BSLH &kp NON_US_HASH &kp TILDE2 &kp MINUS &kp GRAVE &kp LBKT &kp RBKT &kp DEL
&mo 1 &kp LGUI &kp RGUI &mo 2
&kp NUM_1 &kp NUM_2 &kp NUM_3 &kp NUM_4 &kp NUM_5 &kp NUM_6 &kp NUM_7 &kp NUM_8 &kp NUM_9 &kp NUM_0
&kp TAB &kp LC(S) &kp DQT &kp PIPE2 &kp HASH &kp MINUS &kp EQL &kp LBKT &kp RBKT &kp DEL
&kp ESC &kp TILDE &kp NON_US_BSLH &kp NON_US_HASH &kp TILDE2 &kp MINUS &kp GRAVE &kp LBKT &kp RBKT &kp DEL
&mo 1 &kp LGUI &kp RGUI &mo 2
>;
};
right_layer {
bindings = <
&kp BANG &kp ATSN &kp HASH &kp DLLR &kp PRCT &kp CRRT &kp AMPS &kp KMLT &kp LPRN &kp RPRN
&kp BANG &kp ATSN &kp HASH &kp DLLR &kp PRCT &kp CRRT &kp AMPS &kp KMLT &kp LPRN &kp RPRN
&kp HASH &kp QMARK &kp FSLH &kp COLN &kp SCLN &kp MINUS &kp KP_EQUAL &kp LBRC &kp RBRC &kp BKSP
&kp LSFT &kp KPLS &kp LBKT &kp RBKT &kp BSLH &kp UNDER &kp LEFT &kp DOWN &kp UP &kp RIGHT
&mo 3 &kp LCTL &kp SPC &mo 2
&mo 3 &kp LCTL &kp SPC &mo 2
>;
};
};
tri_layer {
bindings = <
&kp NUM_1 &kp NUM_2 &kp NUM_3 &kp NUM_4 &kp NUM_5 &trans &trans &trans &trans &trans
&kp F1 &kp F2 &kp F3 &kp F4 &kp F5 &trans &kp PG_UP &kp K_VOL_UP &kp K_MUTE &trans
&bt BT_CLR &bt BT_NXT &bt BT_PRV &kp F6 &kp F7 &trans &kp PG_DN &kp K_VOL_DN &trans &trans
&trans &trans &trans &trans
&kp F1 &kp F2 &kp F3 &kp F4 &kp F5 &trans &kp PG_UP &kp K_VOL_UP &kp K_MUTE &trans
&bt BT_CLR &bt BT_NXT &bt BT_PRV &kp F6 &kp F7 &trans &kp PG_DN &kp K_VOL_DN &trans &trans
&trans &trans &trans &trans
>;
};
};
};
};

2
app/boards/shields/splitkb_aurora_sweep/splitkb_aurora_sweep_left.overlay
View File

@@ -24,7 +24,7 @@
, <&pro_micro 15 GPIO_ACTIVE_HIGH>
;
col-gpios
col-gpios
= <&pro_micro 10 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>
, <&pro_micro 4 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>
, <&pro_micro 5 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>

2
app/boards/shields/splitkb_aurora_sweep/splitkb_aurora_sweep_right.overlay
View File

@@ -24,7 +24,7 @@
, <&pro_micro 14 GPIO_ACTIVE_HIGH>
;
col-gpios
col-gpios
= <&pro_micro 9 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>
, <&pro_micro 8 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>
, <&pro_micro 7 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>

6
app/boards/shields/splitreus62/Kconfig.defconfig
View File

@@ -1,8 +1,8 @@
# Copyright (c) 2020 Derek Schmell
# SPDX-License-Identifier: MIT
if SHIELD_SPLITREUS62_LEFT
config ZMK_KEYBOARD_NAME
@@ -17,5 +17,5 @@ if SHIELD_SPLITREUS62_LEFT || SHIELD_SPLITREUS62_RIGHT
config ZMK_SPLIT
default y
endif

2
app/boards/shields/splitreus62/splitreus62.dtsi
View File

@@ -45,6 +45,6 @@ RC(4,0) RC(4,1) RC(4,2) RC(4,3) RC(4,4) RC(4,5) RC(4,6) RC(4,7)
, <&pro_micro 5 GPIO_ACTIVE_HIGH>
, <&pro_micro 6 GPIO_ACTIVE_HIGH>
;
};
};

2
app/boards/shields/splitreus62/splitreus62_right.overlay
View File

@@ -3,7 +3,7 @@
*
* SPDX-License-Identifier: MIT
*/
#include "splitreus62.dtsi"
&default_transform {

6
app/boards/shields/tg4x/README.md
View File

@@ -6,6 +6,6 @@ Standard setup for the [TG4x](https://github.com/MythosMann/tg4x/) 40% keyboard.
This TG4x implementation is for...
* rev 2.1 of the board
* Split spacebar with 2.25U on the left and 2.75U on the right
* 2U right shift
- rev 2.1 of the board
- Split spacebar with 2.25U on the left and 2.75U on the right
- 2U right shift

2
app/boards/shields/tg4x/tg4x.overlay
View File

@@ -10,7 +10,7 @@
kscan0: kscan {
compatible = "zmk,kscan-gpio-matrix";
label = "KSCAN";
diode-direction = "col2row";
row-gpios

2
app/boards/shields/tidbit/tidbit.keymap
View File

@@ -21,7 +21,7 @@
keymap {
compatible = "zmk,keymap";
default_layer {
bindings = <
&kp KP_NUMLOCK &kp KP_ASTERISK &kp KP_MINUS

2
app/boards/shields/tidbit/tidbit_19key.keymap
View File

@@ -22,7 +22,7 @@
keymap {
compatible = "zmk,keymap";
default_layer {
bindings = <
&tog 1 &kp KP_NUMLOCK &kp KP_SLASH

4
app/boards/shields/two_percent_milk/two_percent_milk.keymap
View File

@@ -7,11 +7,11 @@
#include <behaviors.dtsi>
#include <dt-bindings/zmk/keys.h>
#include <dt-bindings/zmk/bt.h>
/ {
keymap {
compatible = "zmk,keymap";
default_layer {
bindings = <
&kp X

2
app/boards/shields/waterfowl/Kconfig.defconfig
View File

@@ -13,7 +13,7 @@ if SHIELD_WATERFOWL_LEFT || SHIELD_WATERFOWL_RIGHT
config ZMK_SPLIT
default y
if ZMK_DISPLAY
config I2C

2
app/boards/shields/waterfowl/waterfowl.dtsi
View File

@@ -40,7 +40,7 @@ RC(3,0) RC(3,1) RC(3,2) RC(3,3) RC(3,4) RC(3,5) RC(3,6) RC(3,7) RC(3,8)
, <&pro_micro 6 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
, <&pro_micro 7 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
;
};
left_encoder: encoder_left { //roller

12
app/boards/shields/waterfowl/waterfowl.keymap
View File

@@ -22,8 +22,8 @@
* |------+------+------+------+------| ,-----. ,-----. |------+------+------+------+------|
* | Z | X | C | V | B | | 2 | | 3 | | N | M | , | . | / |
* `----------------------------------' `-----' `-----' `----------------------------------'
* ,-----. ,--------------------. ,--------------------. ,-----.
* | 1 | | DEL | SPACE | TAB | | ESC | BS | ENTER | | 4 |
* ,-----. ,--------------------. ,--------------------. ,-----.
* | 1 | | DEL | SPACE | TAB | | ESC | BS | ENTER | | 4 |
* `-----' `--------------------' `--------------------' `-----'
*/
bindings = <
@@ -46,7 +46,7 @@
* |------+------+------+------+------| ,-----. ,-----. |------+------+------+------+------|
* | | | INS | | | | 2 | | 3 | | 0 | 1 | 2 | 3 | * |
* `----------------------------------' `-----' `-----' `----------------------------------'
* ,-----. ,--------------------. ,--------------------. ,-----.
* ,-----. ,--------------------. ,--------------------. ,-----.
* | 1 | | DEL | SPACE | MO(3)| | ESC | BS | ENTER | | 4 |
* `-----' `--------------------' `--------------------' `-----'
*/
@@ -70,7 +70,7 @@
* |------+------+------+------+------| ,-----. ,-----. |------+------+------+------+------|
* | $ | | { | } | & | | 2 | | 3 | | | | | | |
* `----------------------------------' `-----' `-----' `----------------------------------'
* ,-----. ,--------------------. ,--------------------. ,-----.
* ,-----. ,--------------------. ,--------------------. ,-----.
* | 1 | | DEL | SPACE | TAB | | ESC | BS | ENTER | | 4 |
* `-----' `--------------------' `--------------------' `-----'
*/
@@ -94,7 +94,7 @@
* |------+------+------+------+------| ,-----. ,-----. |------+------+------+------+------|
* | | | | | | | 2 | | 3 | | F10 | F1 | F2 | F3 | F13 |
* `----------------------------------' `-----' `-----' `----------------------------------'
* ,-----. ,--------------------. ,--------------------. ,-----.
* ,-----. ,--------------------. ,--------------------. ,-----.
* | 1 | | DEL | SPACE | TAB | | ESC | BS | ENTER | | 4 |
* `-----' `--------------------' `--------------------' `-----'
*/
@@ -106,7 +106,7 @@
>;
sensor-bindings = <&inc_dec_kp PAGE_UP PAGE_DOWN &inc_dec_kp TAB LS(TAB)>;
};
};
};
};

8
app/boards/shields/zmk_uno/zmk_uno.keymap
View File

@@ -29,8 +29,8 @@
};
REMOVE ME: */
/ {
macros {
ZMK_MACRO(ble_zero,
@@ -47,7 +47,7 @@ REMOVE ME: */
keymap {
compatible = "zmk,keymap";
default_layer {
bindings = <
&kp A &bl BL_TOG
@@ -55,7 +55,7 @@ REMOVE ME: */
&out OUT_USB &ble_zero &ble_one
>;
sensor-bindings = <&inc_dec_kp C_VOL_UP C_VOL_DN>;
};
};

2
app/boards/shields/zodiark/Kconfig.defconfig
View File

@@ -8,7 +8,7 @@ config ZMK_KEYBOARD_NAME
config ZMK_SPLIT_ROLE_CENTRAL
default y
endif
if SHIELD_ZODIARK_LEFT || SHIELD_ZODIARK_RIGHT

2
app/boards/shields/zodiark/zodiark.keymap
View File

@@ -39,7 +39,7 @@
// | | 0 | . | Enter| | | | | | | | 0 | . | Enter | |
bindings = <
&trans &kp F1 &kp F2 &kp F3 &kp F4 &kp F5 &kp F6 &kp F7 &kp F8 &kp F9 &kp F10 &kp F11
&kp KP_NUM &kp KP_N7 &kp KP_N8 &kp KP_N9 &kp PSCRN &kp SLCK &trans &trans &kp PAUSE_BREAK &trans &kp KP_N7 &kp KP_N8 &kp KP_N9 &kp F12
&kp KP_NUM &kp KP_N7 &kp KP_N8 &kp KP_N9 &kp PSCRN &kp SLCK &trans &trans &kp PAUSE_BREAK &trans &kp KP_N7 &kp KP_N8 &kp KP_N9 &kp F12
&trans &kp KP_N4 &kp KP_N5 &kp KP_N6 &kp INS &kp HOME &trans &trans &kp PG_UP &trans &kp KP_N4 &kp KP_N5 &kp KP_N6 &trans
&trans &kp KP_N1 &kp KP_N2 &kp KP_N3 &kp DEL &kp END &trans &trans &trans &trans &kp PG_DN &trans &kp KP_N1 &kp KP_N2 &kp KP_N3 &trans
&trans &kp KP_N0 &kp KP_DOT &kp KP_ENTER &trans &trans &trans &trans &trans &trans &kp KP_N0 &kp KP_DOT &kp KP_ENTER &trans

64
app/core-coverage.yml
View File

@@ -1,35 +1,35 @@
board:
- nice_nano_v2
- nrfmicro_13
- proton_c
- nice_nano_v2
- nrfmicro_13
- proton_c
shield:
- corne_left
- corne_right
- romac
- settings_reset
- tidbit
- corne_left
- corne_right
- romac
- settings_reset
- tidbit
include:
- board: bdn9_rev2
- board: nice60
- board: seeeduino_xiao_ble
shield: hummingbird
- board: nrf52840_m2
shield: m60
- board: planck_rev6
- board: proton_c
shield: clueboard_california
- board: nice_nano_v2
shield: kyria_left
cmake-args: "-DCONFIG_ZMK_DISPLAY=y"
nickname: "display"
- board: nice_nano_v2
shield: kyria_right
cmake-args: "-DCONFIG_ZMK_DISPLAY=y"
nickname: "display"
- board: nice_nano
shield: romac_plus
cmake-args: "-DCONFIG_ZMK_RGB_UNDERGLOW=y -DCONFIG_WS2812_STRIP=y"
nickname: "underglow"
- board: nice_nano_v2
shield: lily58_left nice_view_adapter nice_view
nickname: "niceview"
- board: bdn9_rev2
- board: nice60
- board: seeeduino_xiao_ble
shield: hummingbird
- board: nrf52840_m2
shield: m60
- board: planck_rev6
- board: proton_c
shield: clueboard_california
- board: nice_nano_v2
shield: kyria_left
cmake-args: "-DCONFIG_ZMK_DISPLAY=y"
nickname: "display"
- board: nice_nano_v2
shield: kyria_right
cmake-args: "-DCONFIG_ZMK_DISPLAY=y"
nickname: "display"
- board: nice_nano
shield: romac_plus
cmake-args: "-DCONFIG_ZMK_RGB_UNDERGLOW=y -DCONFIG_WS2812_STRIP=y"
nickname: "underglow"
- board: nice_nano_v2
shield: lily58_left nice_view_adapter nice_view
nickname: "niceview"

20
app/drivers/zephyr/dts/bindings/gpio/maxim,max7318.yaml
View File

@@ -5,24 +5,24 @@
#
description: >
This is a representation of the Maxim MAX7318 I2C Gpio Expander.
This is a representation of the Maxim MAX7318 I2C Gpio Expander.
compatible: "maxim,max7318"
include: [gpio-controller.yaml, i2c-device.yaml]
properties:
label:
required: true
label:
required: true
"#gpio-cells":
const: 2
"#gpio-cells":
const: 2
ngpios:
type: int
required: true
const: 16
description: Number of gpios supported
ngpios:
type: int
required: true
const: 16
description: Number of gpios supported
gpio-cells:
- pin

2
app/dts/bindings/behaviors/zmk,behavior-macro.yaml
View File

@@ -16,4 +16,4 @@ properties:
description: The default time to wait (in milliseconds) before triggering the next behavior in the macro bindings list.
tap-ms:
type: int
description: The default time to wait (in milliseconds) between the press and release events on a tapped macro behavior binding
description: The default time to wait (in milliseconds) between the press and release events on a tapped macro behavior binding

2
app/dts/bindings/behaviors/zmk,behavior-tap-dance.yaml
View File

@@ -13,4 +13,4 @@ properties:
required: true
tapping-term-ms:
type: int
default: 200
default: 200

82
app/dts/bindings/display/gooddisplay,il0323.yaml
View File

@@ -8,54 +8,54 @@ compatible: "gooddisplay,il0323"
include: spi-device.yaml
properties:
height:
type: int
required: true
description: Height in pixel of the panel driven by the controller
height:
type: int
required: true
description: Height in pixel of the panel driven by the controller
width:
type: int
required: true
description: Width in pixel of the panel driven by the controller
width:
type: int
required: true
description: Width in pixel of the panel driven by the controller
reset-gpios:
type: phandle-array
required: true
description: RESET pin.
reset-gpios:
type: phandle-array
required: true
description: RESET pin.
The RESET pin of GD7965 is active low.
If connected directly the MCU pin should be configured
as active low.
The RESET pin of GD7965 is active low.
If connected directly the MCU pin should be configured
as active low.
dc-gpios:
type: phandle-array
required: true
description: DC pin.
dc-gpios:
type: phandle-array
required: true
description: DC pin.
The DC pin of GD7965 is active low (transmission command byte).
If connected directly the MCU pin should be configured
as active low.
The DC pin of GD7965 is active low (transmission command byte).
If connected directly the MCU pin should be configured
as active low.
busy-gpios:
type: phandle-array
required: true
description: BUSY pin.
busy-gpios:
type: phandle-array
required: true
description: BUSY pin.
The BUSY pin of GD7965 is active low.
If connected directly the MCU pin should be configured
as active low.
The BUSY pin of GD7965 is active low.
If connected directly the MCU pin should be configured
as active low.
pwr:
type: uint8-array
required: true
description: Power Setting (PWR) values
pwr:
type: uint8-array
required: true
description: Power Setting (PWR) values
cdi:
type: int
required: true
description: VCOM and data interval value
cdi:
type: int
required: true
description: VCOM and data interval value
tcon:
type: int
required: true
description: TCON setting value
tcon:
type: int
required: true
description: TCON setting value

2
app/dts/bindings/macros/zmk,macro-control-mode-press.yaml
View File

@@ -5,4 +5,4 @@ description: Set Macro To Press Mode
compatible: "zmk,macro-control-mode-press"
include: zero_param.yaml
include: zero_param.yaml

2
app/dts/bindings/macros/zmk,macro-control-mode-release.yaml
View File

@@ -5,4 +5,4 @@ description: Set Macro To Release Mode
compatible: "zmk,macro-control-mode-release"
include: zero_param.yaml
include: zero_param.yaml

2
app/dts/bindings/macros/zmk,macro-control-tap-time.yaml
View File

@@ -5,4 +5,4 @@ description: Set Macro Tap Duration
compatible: "zmk,macro-control-tap-time"
include: one_param.yaml
include: one_param.yaml

2
app/dts/bindings/macros/zmk,macro-control-wait-time.yaml
View File

@@ -5,4 +5,4 @@ description: Set Macro Wait Duration
compatible: "zmk,macro-control-wait-time"
include: one_param.yaml
include: one_param.yaml

Some files were not shown because too many files have changed in this diff Show More