Jacob/zmk
1
0
Fork 0
forked from kofal.net/zmk
Code Pull Requests Activity

merge upstream

Browse Source
This commit is contained in:
Kofal
2026-03-29 21:25:58 -05:00
parent 9c1f27d103 c1378e022f
commit 8ee0d32d3f
2133 changed files with 64676 additions and 33117 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
app/boards/01space_rp2040_042lcd.conf
View File

@@ -1,6 +0,0 @@
CONFIG_ZMK_DISPLAY=y
CONFIG_LV_FONT_UNSCII_8=n
CONFIG_ZMK_USB=y
CONFIG_I2C=y
CONFIG_I2C_DW=y
CONFIG_LV_Z_VDB_SIZE=50

9
app/boards/01space_rp2040_042lcd.overlay
View File

@@ -1,9 +0,0 @@
/*
* Copyright (c) 2023 The ZMK Contributors
*
* SPDX-License-Identifier: MIT
*/
#include "usb_console.dtsi"
&xiao_serial { status = "disabled"; };

9
app/boards/adafruit/kb2040/Kconfig.adafruit_kb2040 Normal file
View File

@@ -0,0 +1,9 @@
# Copyright (c) 2026 The ZMK Contributors
# SPDX-License-Identifier: MIT
config BOARD_ADAFRUIT_KB2040
select ZMK_BOARD_COMPAT if BOARD_ADAFRUIT_KB2040_RP2040_ZMK
imply RETAINED_MEM if BOARD_ADAFRUIT_KB2040_RP2040_ZMK
imply RETENTION if BOARD_ADAFRUIT_KB2040_RP2040_ZMK
imply RETENTION_BOOT_MODE if BOARD_ADAFRUIT_KB2040_RP2040_ZMK

2
app/boards/arm/adafruit_kb2040/adafruit_kb2040.zmk.yml → app/boards/adafruit/kb2040/adafruit_kb2040.zmk.yml
View File

@@ -1,5 +1,5 @@
file_format: "1"
id: adafruit_kb2040
id: adafruit_kb2040//zmk
name: Adafruit KB2040
type: board
arch: arm

3
app/boards/sparkfun_pro_micro_rp2040.overlay → app/boards/adafruit/kb2040/adafruit_kb2040_zmk.dts
View File

@@ -4,6 +4,7 @@
* SPDX-License-Identifier: MIT
*/
#include "usb_console.dtsi"
#include <../boards/adafruit/kb2040/adafruit_kb2040.dts>
#include <arm/raspberrypi/rp2040-boot-mode-retention.dtsi>
&pro_micro_serial { status = "disabled"; };

23
app/boards/adafruit/kb2040/adafruit_kb2040_zmk_defconfig Normal file
View File

@@ -0,0 +1,23 @@
# SPDX-License-Identifier: MIT
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=125000000
# Enable reset by default
CONFIG_RESET=y
# Enable clock control by default
CONFIG_CLOCK_CONTROL=y
# Code partition needed to target the correct flash range
CONFIG_USE_DT_CODE_PARTITION=y
# Output UF2 by default, native bootloader supports it.
CONFIG_BUILD_OUTPUT_UF2=y
# USB HID
CONFIG_ZMK_USB=y
# Bootloader Support
CONFIG_RETAINED_MEM=y
CONFIG_RETENTION=y
CONFIG_RETENTION_BOOT_MODE=y

5
app/boards/adafruit/kb2040/board.yml Normal file
View File

@@ -0,0 +1,5 @@
board:
extend: adafruit_kb2040
variants:
- name: zmk
qualifier: rp2040

9
app/boards/adafruit/qt_py_rp2040/Kconfig.adafruit_qt_py_rp2040 Normal file
View File

@@ -0,0 +1,9 @@
# Copyright (c) 2026 The ZMK Contributors
# SPDX-License-Identifier: MIT
config BOARD_ADAFRUIT_QT_PY_RP2040
select ZMK_BOARD_COMPAT if BOARD_ADAFRUIT_QT_PY_RP2040_RP2040_ZMK
imply RETAINED_MEM if BOARD_ADAFRUIT_QT_PY_RP2040_RP2040_ZMK
imply RETENTION if BOARD_ADAFRUIT_QT_PY_RP2040_RP2040_ZMK
imply RETENTION_BOOT_MODE if BOARD_ADAFRUIT_QT_PY_RP2040_RP2040_ZMK

2
app/boards/arm/adafruit_qt_py_rp2040/adafruit_qt_py_rp2040.zmk.yml → app/boards/adafruit/qt_py_rp2040/adafruit_qt_py_rp2040.zmk.yml
View File

@@ -1,5 +1,5 @@
file_format: "1"
id: adafruit_qt_py_rp2040
id: adafruit_qt_py_rp2040//zmk
name: Adafruit QT Py RP2040
type: board
arch: arm

10
app/boards/adafruit/qt_py_rp2040/adafruit_qt_py_rp2040_zmk.dts Normal file
View File

@@ -0,0 +1,10 @@
/*
* Copyright (c) 2023 The ZMK Contributors
*
* SPDX-License-Identifier: MIT
*/
#include <../boards/adafruit/qt_py_rp2040/adafruit_qt_py_rp2040.dts>
#include <arm/raspberrypi/rp2040-boot-mode-retention.dtsi>
&xiao_serial { status = "disabled"; };

23
app/boards/adafruit/qt_py_rp2040/adafruit_qt_py_rp2040_zmk_defconfig Normal file
View File

@@ -0,0 +1,23 @@
# SPDX-License-Identifier: MIT
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=125000000
# Enable reset by default
CONFIG_RESET=y
# Enable clock control by default
CONFIG_CLOCK_CONTROL=y
# Code partition needed to target the correct flash range
CONFIG_USE_DT_CODE_PARTITION=y
# Output UF2 by default, native bootloader supports it.
CONFIG_BUILD_OUTPUT_UF2=y
# USB HID
CONFIG_ZMK_USB=y
# Bootloader Support
CONFIG_RETAINED_MEM=y
CONFIG_RETENTION=y
CONFIG_RETENTION_BOOT_MODE=y

5
app/boards/adafruit/qt_py_rp2040/board.yml Normal file
View File

@@ -0,0 +1,5 @@
board:
extend: adafruit_qt_py_rp2040
variants:
- name: zmk
qualifier: rp2040

4
app/boards/adafruit_kb2040.conf
View File

@@ -1,4 +0,0 @@
CONFIG_CONSOLE=n
CONFIG_SERIAL=n
CONFIG_UART_CONSOLE=n
CONFIG_ZMK_USB=y

9
app/boards/adafruit_kb2040.overlay
View File

@@ -1,9 +0,0 @@
/*
* Copyright (c) 2023 The ZMK Contributors
*
* SPDX-License-Identifier: MIT
*/
#include "usb_console.dtsi"
&pro_micro_serial { status = "disabled"; };

6
app/boards/seeeduino_xiao_ble.conf → app/boards/adafruit_metro_rp2040.conf
View File

@@ -1,15 +1,11 @@
CONFIG_CONSOLE=n
CONFIG_SERIAL=n
CONFIG_UART_CONSOLE=n
CONFIG_UART_INTERRUPT_DRIVEN=n
CONFIG_ZMK_USB=y
CONFIG_ZMK_BLE=y
CONFIG_MPU_ALLOW_FLASH_WRITE=y
CONFIG_NVS=y
CONFIG_SETTINGS_NVS=y
CONFIG_FLASH=y
CONFIG_FLASH_PAGE_LAYOUT=y
CONFIG_FLASH_MAP=y
CONFIG_FLASH_MAP=y

4
app/boards/adafruit_qt_py_rp2040.conf
View File

@@ -1,4 +0,0 @@
CONFIG_CONSOLE=n
CONFIG_SERIAL=n
CONFIG_UART_CONSOLE=n
CONFIG_ZMK_USB=y

9
app/boards/adafruit_qt_py_rp2040.overlay
View File

@@ -1,9 +0,0 @@
/*
* Copyright (c) 2023 The ZMK Contributors
*
* SPDX-License-Identifier: MIT
*/
#include "usb_console.dtsi"
&xiao_serial { status = "disabled"; };

2
app/boards/aliases.cmake Normal file
View File

@@ -0,0 +1,2 @@
# defines board aliases for shorter names (or for renaming boards)
set(mikoto_520_BOARD_ALIAS "mikoto")

8
app/boards/arm/bdn9/Kconfig.board
View File

@@ -1,8 +0,0 @@
# keeb.io BDN9 board configuration
# Copyright (c) 2020 The ZMK Contributors
# SPDX-License-Identifier: MIT
config BOARD_BDN9
bool "BDN9 rev2"
depends on SOC_STM32F072XB

11
app/boards/arm/bdn9/bdn9_rev2.yml
View File

@@ -1,11 +0,0 @@
file_format: "1"
id: bdn9_rev2
name: BDN9 Rev2
type: board
arch: arm
features:
- keys
- encoder
outputs:
- usb
url: https://keeb.io/products/bdn9-rev-2-3x3-9-key-macropad-rotary-encoder-and-rgb

8
app/boards/arm/bluemicro840/Kconfig
View File

@@ -1,8 +0,0 @@
# SPDX-License-Identifier: MIT
config BOARD_ENABLE_DCDC
bool "Enable DCDC mode"
select SOC_DCDC_NRF52X
default y
depends on BOARD_BLUEMICRO840_V1

8
app/boards/arm/bluemicro840/Kconfig.board
View File

@@ -1,8 +0,0 @@
# BlueMicro840 board configuration
# Copyright (c) 2020 Pete Johanson, Derek Schmell
# SPDX-License-Identifier: MIT
config BOARD_BLUEMICRO840_V1
bool "BlueMicro840_V1"
depends on SOC_NRF52840_QIAA

21
app/boards/arm/bluemicro840/Kconfig.defconfig
View File

@@ -1,21 +0,0 @@
# BlueMicro840 board configuration
# Copyright (c) 2020 Pete Johanson, Derek Schmell
# SPDX-License-Identifier: MIT
if BOARD_BLUEMICRO840_V1
config BOARD
default "bluemicro840_v1"
if USB_DEVICE_STACK
config USB_NRFX
default y
endif # USB_DEVICE_STACK
config BT_CTLR
default BT
endif # BOARD_BLUEMICRO840_V1

57
app/boards/arm/bluemicro840/arduino_pro_micro_pins.dtsi
View File

@@ -1,57 +0,0 @@
/*
* Copyright (c) 2020 Derek Schmell
*
* SPDX-License-Identifier: MIT
*/
/ {
pro_micro: connector {
compatible = "arduino-pro-micro";
#gpio-cells = <2>;
gpio-map-mask = <0xffffffff 0xffffffc0>;
gpio-map-pass-thru = <0 0x3f>;
gpio-map
= <0 0 &gpio0 8 0> /* D0 D2 */
, <1 0 &gpio0 6 0> /* D1 D3*/
, <2 0 &gpio0 15 0> /* D2 D1*/
, <3 0 &gpio0 17 0> /* D3 D0*/
, <4 0 &gpio0 20 0> /* D4/A6 D4*/
, <5 0 &gpio0 13 0> /* D5 C6*/
, <6 0 &gpio0 24 0> /* D6/A7 D7*/
, <7 0 &gpio0 9 0> /* D7 E6*/
, <8 0 &gpio0 10 0> /* D8/A8 B4*/
, <9 0 &gpio1 6 0> /* D9/A9 B5*/
, <10 0 &gpio1 11 0> /* D10/A10 B6*/
, <16 0 &gpio0 28 0> /* D16 B2*/
, <14 0 &gpio0 3 0> /* D14 B3*/
, <15 0 &gpio1 13 0> /* D15 B1*/
, <18 0 &gpio0 2 0> /* D18/A0 F7*/
, <19 0 &gpio0 29 0> /* D19/A1 F6*/
, <20 0 &gpio0 26 0> /* D20/A2 F5*/
, <21 0 &gpio0 30 0> /* D21/A3 F4*/
;
};
pro_micro_a: connector_a {
compatible = "arduino-pro-micro";
#gpio-cells = <2>;
gpio-map-mask = <0xffffffff 0xffffffc0>;
gpio-map-pass-thru = <0 0x3f>;
gpio-map
= <0 0 &gpio0 2 0> /* D18/A0 F7*/
, <1 0 &gpio0 29 0> /* D19/A1 F6*/
, <2 0 &gpio0 26 0> /* D20/A2 F5*/
, <3 0 &gpio0 30 0> /* D21/A3 F4*/
, <6 0 &gpio0 20 0> /* D4/A6 D4*/
, <7 0 &gpio0 24 0> /* D6/A7 D7*/
, <8 0 &gpio0 10 0> /* D8/A8 B4*/
, <9 0 &gpio1 6 0> /* D9/A9 B5*/
, <10 0 &gpio1 11 0> /* D10/A10 B6*/
;
};
};
pro_micro_d: &pro_micro {};
pro_micro_i2c: &i2c0 {};
pro_micro_spi: &spi0 {};
pro_micro_serial: &uart0 {};

39
app/boards/arm/bluemicro840/bluemicro840_v1-pinctrl.dtsi
View File

@@ -1,39 +0,0 @@
/*
* Copyright (c) 2022 The ZMK Contributors
* SPDX-License-Identifier: MIT
*/
&pinctrl {
uart0_default: uart0_default {
group1 {
psels = <NRF_PSEL(UART_RX, 0, 8)>;
bias-pull-up;
};
group2 {
psels = <NRF_PSEL(UART_TX, 0, 6)>;
};
};
uart0_sleep: uart0_sleep {
group1 {
psels = <NRF_PSEL(UART_RX, 0, 8)>,
<NRF_PSEL(UART_TX, 0, 6)>;
low-power-enable;
};
};
i2c0_default: i2c0_default {
group1 {
psels = <NRF_PSEL(TWIM_SDA, 0, 15)>,
<NRF_PSEL(TWIM_SCL, 0, 17)>;
};
};
i2c0_sleep: i2c0_sleep {
group1 {
psels = <NRF_PSEL(TWIM_SDA, 0, 15)>,
<NRF_PSEL(TWIM_SCL, 0, 17)>;
low-power-enable;
};
};
};

127
app/boards/arm/bluemicro840/bluemicro840_v1.dts
View File

@@ -1,127 +0,0 @@
/*
* Copyright (c) 2020 Pete Johanson, Derek Schmell
*
* SPDX-License-Identifier: MIT
*/
/dts-v1/;
#include <nordic/nrf52840_qiaa.dtsi>
#include "arduino_pro_micro_pins.dtsi"
#include "bluemicro840_v1-pinctrl.dtsi"
/ {
model = "BlueMicro840_V1";
compatible = "bluemicro840,v1";
chosen {
zephyr,code-partition = &code_partition;
zephyr,sram = &sram0;
zephyr,flash = &flash0;
zephyr,console = &cdc_acm_uart;
zmk,battery = &vbatt;
};
leds {
compatible = "gpio-leds";
blue_led: led_0 {
gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
label = "Blue LED";
};
};
ext-power {
compatible = "zmk,ext-power-generic";
label = "EXT_POWER";
init-delay-ms = <20>;
control-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
};
vbatt: vbatt {
compatible = "zmk,battery-voltage-divider";
label = "BATTERY";
io-channels = <&adc 7>;
output-ohms = <2000000>;
full-ohms = <(2000000 + 806000)>;
};
};
&adc {
status = "okay";
};
&gpiote {
status = "okay";
};
&gpio0 {
status = "okay";
};
&gpio1 {
status = "okay";
};
&i2c0 {
compatible = "nordic,nrf-twi";
pinctrl-0 = <&i2c0_default>;
pinctrl-1 = <&i2c0_sleep>;
pinctrl-names = "default", "sleep";
};
&uart0 {
compatible = "nordic,nrf-uarte";
current-speed = <115200>;
pinctrl-0 = <&uart0_default>;
pinctrl-1 = <&uart0_sleep>;
pinctrl-names = "default", "sleep";
};
&usbd {
status = "okay";
cdc_acm_uart: cdc_acm_uart {
compatible = "zephyr,cdc-acm-uart";
label = "CDC_ACM_0";
};
};
&flash0 {
/*
* For more information, see:
* http://docs.zephyrproject.org/latest/devices/dts/flash_partitions.html
*/
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
sd_partition: partition@0 {
label = "softdevice";
reg = <0x00000000 0x00026000>;
};
code_partition: partition@26000 {
label = "code_partition";
reg = <0x00026000 0x000c6000>;
};
/*
* The flash starting at 0x000ec000 and ending at
* 0x000f3fff is reserved for use by the application.
*/
/*
* Storage partition will be used by FCB/LittleFS/NVS
* if enabled.
*/
storage_partition: partition@ec000 {
label = "storage";
reg = <0x000ec000 0x00008000>;
};
boot_partition: partition@f4000 {
label = "adafruit_boot";
reg = <0x000f4000 0x0000c000>;
};
};
};

9
app/boards/arm/boardsource_blok/boardsource_blok.zmk.yml
View File

@@ -1,9 +0,0 @@
file_format: "1"
id: boardsource_blok
name: BoardSource blok
type: board
arch: arm
outputs:
- usb
url: https://peg.software/docs/blok
exposes: [pro_micro]

7
app/boards/arm/bt60/Kconfig
View File

@@ -1,7 +0,0 @@
# SPDX-License-Identifier: MIT
config BOARD_ENABLE_DCDC
bool "Enable DCDC mode"
select SOC_DCDC_NRF52X
default y
depends on (BOARD_BT60_V1_HS || BOARD_BT60_V1)

12
app/boards/arm/bt60/Kconfig.board
View File

@@ -1,12 +0,0 @@
# BT60 board configuration
# Copyright (c) 2021 Polarity Works
# SPDX-License-Identifier: MIT
config BOARD_BT60_V1
bool "bt60"
depends on SOC_NRF52840_QIAA
config BOARD_BT60_V1_HS
bool "bt60 hotswap"
depends on SOC_NRF52840_QIAA

135
app/boards/arm/bt60/bt60.dtsi
View File

@@ -1,135 +0,0 @@
/*
* Copyright (c) 2021 Polarity Works
*
* SPDX-License-Identifier: MIT
*/
/dts-v1/;
#include <nordic/nrf52840_qiaa.dtsi>
#include <dt-bindings/zmk/matrix_transform.h>
/ {
model = "BT60";
compatible = "polarityworks,bt60";
chosen {
zephyr,code-partition = &code_partition;
zephyr,sram = &sram0;
zephyr,flash = &flash0;
zephyr,console = &cdc_acm_uart;
zmk,battery = &vbatt;
zmk,kscan = &kscan0;
zmk,matrix_transform = &default_transform;
};
sensors: sensors {
compatible = "zmk,keymap-sensors";
sensors = <&left_encoder>;
triggers-per-rotation = <20>;
};
left_encoder: encoder_left {
compatible = "alps,ec11";
label = "LEFT_ENCODER";
a-gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>;
b-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>;
steps = <80>;
status = "okay";
};
leds {
compatible = "gpio-leds";
blue_led: led_0 {
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
label = "Blue LED";
};
};
vbatt: vbatt {
compatible = "zmk,battery-voltage-divider";
label = "BATTERY";
io-channels = <&adc 2>;
output-ohms = <2000000>;
full-ohms = <(2000000 + 806000)>;
};
};
&adc {
status = "okay";
};
&gpiote {
status = "okay";
};
&gpio0 {
status = "okay";
};
&gpio1 {
status = "okay";
};
&i2c0 {
compatible = "nordic,nrf-twi";
sda-pin = <17>;
scl-pin = <20>;
};
&uart0 {
compatible = "nordic,nrf-uarte";
tx-pin = <6>;
rx-pin = <8>;
};
&usbd {
status = "okay";
cdc_acm_uart: cdc_acm_uart {
compatible = "zephyr,cdc-acm-uart";
label = "CDC_ACM_0";
};
};
&flash0 {
/*
* For more information, see:
* http://docs.zephyrproject.org/latest/devices/dts/flash_partitions.html
*/
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
sd_partition: partition@0 {
label = "softdevice";
reg = <0x00000000 0x00026000>;
};
code_partition: partition@26000 {
label = "code_partition";
reg = <0x00026000 0x000c6000>;
};
/*
* The flash starting at 0x000ec000 and ending at
* 0x000f3fff is reserved for use by the application.
*/
/*
* Storage partition will be used by FCB/LittleFS/NVS
* if enabled.
*/
storage_partition: partition@ec000 {
label = "storage";
reg = <0x000ec000 0x00008000>;
};
boot_partition: partition@f4000 {
label = "adafruit_boot";
reg = <0x000f4000 0x0000c000>;
};
};
};

15
app/boards/arm/bt60/bt60_v1.yaml
View File

@@ -1,15 +0,0 @@
identifier: bt60_v1
name: BT60 V1 Soldered
type: mcu
arch: arm
toolchain:
- zephyr
- gnuarmemb
- xtools
supported:
- adc
- usb_device
- ble
- ieee802154
- pwm
- watchdog

12
app/boards/arm/bt60/bt60_v1.zmk.yml
View File

@@ -1,12 +0,0 @@
file_format: "1"
id: bt60_v1
name: BT60 V1 Soldered
type: board
arch: arm
features:
- keys
- encoder
outputs:
- usb
- ble
url: https://polarityworks.com

15
app/boards/arm/bt60/bt60_v1_hs.yaml
View File

@@ -1,15 +0,0 @@
identifier: bt60_v1_hs
name: BT60 V1 Hotswap
type: mcu
arch: arm
toolchain:
- zephyr
- gnuarmemb
- xtools
supported:
- adc
- usb_device
- ble
- ieee802154
- pwm
- watchdog

8
app/boards/arm/ckp/Kconfig
View File

@@ -1,8 +0,0 @@
# Copyright (c) 2022 The ZMK Contributors
# SPDX-License-Identifier: MIT
config BOARD_ENABLE_DCDC
bool "Enable DCDC mode"
select SOC_DCDC_NRF52X
default y
depends on BOARD_BT60_V2 || BOARD_BT65_V1 || BOARD_BT75_V1

16
app/boards/arm/ckp/Kconfig.board
View File

@@ -1,16 +0,0 @@
# CKP boards configuration
# Copyright (c) 2022 The ZMK Contributors
# SPDX-License-Identifier: MIT
config BOARD_BT60_V2
bool "bt60_v2"
depends on SOC_NRF52840_QIAA
config BOARD_BT65_V1
bool "bt65_v1"
depends on SOC_NRF52840_QIAA
config BOARD_BT75_V1
bool "bt75_v1"
depends on SOC_NRF52840_QIAA

28
app/boards/arm/ckp/Kconfig.defconfig
View File

@@ -1,28 +0,0 @@
# Copyright (c) 2022 The ZMK Contributors
# SPDX-License-Identifier: MIT
config BOARD
default "bt60_v2" if BOARD_BT60_V2
default "bt65_v1" if BOARD_BT65_V1
default "bt75_v1" if BOARD_BT75_V1
config ZMK_KEYBOARD_NAME
default "BT60 V2" if BOARD_BT60_V2
default "BT65" if BOARD_BT65_V1
default "BT75" if BOARD_BT75_V1
if BOARD_BT60_V2 || BOARD_BT65_V1 || BOARD_BT75_V1
if USB
config USB_NRFX
default y
config USB_DEVICE_STACK
default y
endif # USB
config BT_CTLR
default BT
endif # BOARD_BT60_V2 || BOARD_BT65_V1 || BOARD_BT75_V1

10
app/boards/arm/corneish_zen/Kconfig
View File

@@ -1,10 +0,0 @@
#
# Copyright (c) 2022 The ZMK Contributors
# SPDX-License-Identifier: MIT
#
config BOARD_CORNEISH_ZEN_LEFT
bool
config BOARD_CORNEISH_ZEN_RIGHT
bool

24
app/boards/arm/corneish_zen/Kconfig.board
View File

@@ -1,24 +0,0 @@
#
# Copyright (c) 2022 Darryl deHaan
# SPDX-License-Identifier: MIT
#
config BOARD_CORNEISH_ZEN_V1_LEFT
bool "corneish zen left v1"
depends on SOC_NRF52840_QIAA
select BOARD_CORNEISH_ZEN_LEFT
config BOARD_CORNEISH_ZEN_V1_RIGHT
bool "corneish zen right v1"
depends on SOC_NRF52840_QIAA
select BOARD_CORNEISH_ZEN_RIGHT
config BOARD_CORNEISH_ZEN_V2_LEFT
bool "corneish zen left v2"
depends on SOC_NRF52840_QIAA
select BOARD_CORNEISH_ZEN_LEFT
config BOARD_CORNEISH_ZEN_V2_RIGHT
bool "corneish zen right v2"
depends on SOC_NRF52840_QIAA
select BOARD_CORNEISH_ZEN_RIGHT

20
app/boards/arm/corneish_zen/corneish_zen_v2.yaml
View File

@@ -1,20 +0,0 @@
identifier: corneish_zen_v2
name: Corne-ish Zen v2
type: keyboard
arch: arm
toolchain:
- zephyr
- gnuarmemb
- xtools
supported:
- gpio
- i2c
- counter
- spi
- usb_device
- lsm303dlhc
- nvs
- can
- kscan
- ble
- adc

15
app/boards/arm/corneish_zen/corneish_zen_v2.zmk.yml
View File

@@ -1,15 +0,0 @@
file_format: "1"
id: corneish_zen_v2
name: Corneish Zen v2
url: https://lowprokb.ca/collections/keyboards/products/corne-ish-zen
type: board
arch: arm
features:
- keys
- display
outputs:
- usb
- ble
siblings:
- corneish_zen_v2_left
- corneish_zen_v2_right

6
app/boards/arm/dz60rgb/Kconfig.board
View File

@@ -1,6 +0,0 @@
# Copyright (c) 2020 The ZMK Contributors
# SPDX-License-Identifier: MIT
config BOARD_DZ60RGB_REV1
bool "DZ60RGB Keyboard"
depends on SOC_STM32F303XC

11
app/boards/arm/dz60rgb/Kconfig.defconfig
View File

@@ -1,11 +0,0 @@
# DZ60RGB keyboard configuration
# Copyright (c) 2020 The ZMK Contributors
# SPDX-License-Identifier: MIT
if BOARD_DZ60RGB_REV1
config ZMK_KEYBOARD_NAME
default "DZ60RGB Rev 1"
endif # BOARD_DZ60RGB_REV1

93
app/boards/arm/dz60rgb/dz60rgb_rev1.dts
View File

@@ -1,93 +0,0 @@
/*
* Copyright (c) 2020 The ZMK Contributors
*
* SPDX-License-Identifier: MIT
*/
/dts-v1/;
#include <st/f3/stm32f303Xc.dtsi>
#include <dt-bindings/zmk/matrix_transform.h>
/ {
model = "DZ60RGB, Rev 1";
compatible = "dz60rgb,rev1", "st,stm32f303";
chosen {
zephyr,sram = &sram0;
zephyr,flash = &flash0;
zephyr,console = &cdc_acm_uart;
zmk,kscan = &kscan0;
zmk,matrix_transform = &default_transform;
};
default_transform: keymap_transform_0 {
compatible = "zmk,matrix-transform";
columns = <14>;
rows = <5>;
map = <
RC(0,0) RC(0,1) RC(0,2) RC(0,3) RC(0,4) RC(0,5) RC(0,6) RC(0,7) RC(0,8) RC(0,9) RC(0,10) RC(0,11) RC(0,12) RC(0,13)
RC(1,0) RC(1,1) RC(1,2) RC(1,3) RC(1,4) RC(1,5) RC(1,6) RC(1,7) RC(1,8) RC(1,9) RC(1,10) RC(1,11) RC(1,12) RC(1,13)
RC(2,0) RC(2,1) RC(2,2) RC(2,3) RC(2,4) RC(2,5) RC(2,6) RC(2,7) RC(2,8) RC(2,9) RC(2,10) RC(2,11) RC(2,13)
RC(3,0) RC(3,1) RC(3,2) RC(3,3) RC(3,4) RC(3,5) RC(3,6) RC(3,7) RC(3,8) RC(3,9) RC(3,10) RC(3,11) RC(3,13)
RC(4,0) RC(4,1) RC(4,2) RC(4,5) RC(4,8) RC(4,9) RC(4,10) RC(4,11) RC(4,13)
>;
};
kscan0: kscan {
compatible = "zmk,kscan-gpio-matrix";
label = "KSCAN";
diode-direction = "col2row";
row-gpios
= <&gpioa 9 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
, <&gpiob 10 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
, <&gpiob 11 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
, <&gpiob 14 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
, <&gpiob 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
;
col-gpios
= <&gpioa 6 GPIO_ACTIVE_HIGH>
, <&gpioa 7 GPIO_ACTIVE_HIGH>
, <&gpiob 0 GPIO_ACTIVE_HIGH>
, <&gpiob 13 GPIO_ACTIVE_HIGH>
, <&gpiob 15 GPIO_ACTIVE_HIGH>
, <&gpioa 8 GPIO_ACTIVE_HIGH>
, <&gpioa 15 GPIO_ACTIVE_HIGH>
, <&gpiob 3 GPIO_ACTIVE_HIGH>
, <&gpiob 4 GPIO_ACTIVE_HIGH>
, <&gpiob 5 GPIO_ACTIVE_HIGH>
, <&gpiob 8 GPIO_ACTIVE_HIGH>
, <&gpiob 9 GPIO_ACTIVE_HIGH>
, <&gpioc 13 GPIO_ACTIVE_HIGH>
, <&gpioc 14 GPIO_ACTIVE_HIGH>
;
};
};
&usb {
status = "okay";
cdc_acm_uart: cdc_acm_uart {
compatible = "zephyr,cdc-acm-uart";
label = "CDC_ACM_0";
};
};
&flash0 {
/*
* For more information, see:
* http://docs.zephyrproject.org/latest/guides/dts/index.html#flash-partitions
*/
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
/* Set 6Kb of storage at the end of the 256Kb of flash */
storage_partition: partition@3e800 {
label = "storage";
reg = <0x0003e800 0x00001800>;
};
};
};

25
app/boards/arm/dz60rgb/dz60rgb_rev1.keymap
View File

@@ -1,25 +0,0 @@
#include <behaviors.dtsi>
#include <dt-bindings/zmk/keys.h>
/ {
keymap {
compatible = "zmk,keymap";
default_layer {
// ------------------------------------------------------------------------------------------
// | ESC | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | BKSP |
// | TAB | Q | W | E | R | T | Y | U | I | O | P | [ | ] | "|" |
// | CAPS | A | S | D | F | G | H | J | K | L | ; | ' | ENTER |
// | SHIFT | Z | X | C | V | B | N | M | , | . | SHIFT(/) | ^ | DEL |
// | CTL | WIN | ALT | SPACE | ALT | MO(1) | <- | v | -> |
// ------------------------------------------------------------------------------------------
bindings = <
&kp ESC &kp N1 &kp N2 &kp N3 &kp N4 &kp N5 &kp N6 &kp N7 &kp N8 &kp N9 &kp N0 &kp MINUS &kp EQUAL &kp BSPC
&kp TAB &kp Q &kp W &kp E &kp R &kp T &kp Y &kp U &kp I &kp O &kp P &kp LBKT &kp RBKT &kp BSLH
&kp CLCK &kp A &kp S &kp D &kp F &kp G &kp H &kp J &kp K &kp L &kp SEMI &kp SQT &kp RET
&kp LSHFT &kp Z &kp X &kp C &kp V &kp B &kp N &kp M &kp COMMA &kp DOT &mt RSHFT FSLH &kp UP &kp DEL
&kp LCTRL &kp LGUI &kp LALT &kp SPACE &kp RALT &mo 1 &kp LEFT &kp DOWN &kp RIGHT
>;
};
};
};

29
app/boards/arm/dz60rgb/dz60rgb_rev1_defconfig
View File

@@ -1,29 +0,0 @@
# SPDX-License-Identifier: MIT
CONFIG_SOC_SERIES_STM32F3X=y
CONFIG_SOC_STM32F303XC=y
# 72MHz system clock
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=72000000
# enable pinmux
CONFIG_PINMUX=y
# enable GPIO
CONFIG_GPIO=y
# clock configuration
CONFIG_CLOCK_CONTROL=y
# Clock configuration for Cube Clock control driver
CONFIG_CLOCK_STM32_HSE_CLOCK=8000000
CONFIG_CLOCK_STM32_SYSCLK_SRC_PLL=y
# use HSE as PLL input
CONFIG_CLOCK_STM32_PLL_SRC_HSE=y
# produce 72MHz clock at PLL output
CONFIG_CLOCK_STM32_PLL_PREDIV=1
CONFIG_CLOCK_STM32_PLL_MULTIPLIER=9
CONFIG_CLOCK_STM32_AHB_PRESCALER=1
CONFIG_CLOCK_STM32_APB1_PRESCALER=2
CONFIG_CLOCK_STM32_APB2_PRESCALER=1
CONFIG_ZMK_USB=y

8
app/boards/arm/ferris/Kconfig.board
View File

@@ -1,8 +0,0 @@
# Ferris board configuration
# Copyright (c) 2020 The ZMK Contributors
# SPDX-License-Identifier: MIT
config BOARD_FERRIS
bool "Ferris rev 0.2"
depends on SOC_STM32F072XB

8
app/boards/arm/glove80/Kconfig
View File

@@ -1,8 +0,0 @@
# Copyright (c) 2021 The ZMK Contributors
# SPDX-License-Identifier: MIT
config BOARD_ENABLE_DCDC
bool "Enable DCDC mode"
select SOC_DCDC_NRF52X
default y
depends on (BOARD_GLOVE80_LH || BOARD_GLOVE80_RH)

10
app/boards/arm/glove80/Kconfig.board
View File

@@ -1,10 +0,0 @@
# Copyright (c) 2021 The ZMK Contributors
# SPDX-License-Identifier: MIT
config BOARD_GLOVE80_LH
bool "Glove80 LH"
depends on SOC_NRF52840_QIAA
config BOARD_GLOVE80_RH
bool "Glove80 RH"
depends on SOC_NRF52840_QIAA

6
app/boards/arm/kbdfans_tofu65/Kconfig.board
View File

@@ -1,6 +0,0 @@
# Copyright (c) 2023 The ZMK Contributors
# SPDX-License-Identifier: Apache-2.0
config BOARD_KBDFANS_TOFU65_V2
bool "KBDfans Tofu65 2.0"
depends on SOC_RP2040

6
app/boards/arm/mikoto/CMakeLists.txt
View File

@@ -1,6 +0,0 @@
if(CONFIG_PINMUX)
zephyr_library()
zephyr_library_sources(pinmux.c)
zephyr_library_include_directories(${ZEPHYR_BASE}/drivers)
endif()

29
app/boards/arm/mikoto/Kconfig
View File

@@ -1,29 +0,0 @@
config BOARD_ENABLE_DCDC
bool "Enable DCDC mode"
select SOC_DCDC_NRF52X
default y
depends on (BOARD_MIKOTO_520)
choice BOARD_MIKOTO_CHARGER_CURRENT
prompt "Charge current to supply to attached batteries"
depends on (BOARD_MIKOTO_520)
config BOARD_MIKOTO_CHARGER_CURRENT_40MA
bool "40mA charge current, for battery capacity 40mAh or higher"
config BOARD_MIKOTO_CHARGER_CURRENT_100MA
bool "100mA charge current, for battery capacity 100mAh or higher"
config BOARD_MIKOTO_CHARGER_CURRENT_150MA
bool "150mA charge current, for battery capacity 150mAh or higher"
config BOARD_MIKOTO_CHARGER_CURRENT_250MA
bool "250mA charge current, for battery capacity 250mAh or higher"
config BOARD_MIKOTO_CHARGER_CURRENT_350MA
bool "350mA charge current, for battery capacity 350mAh or higher"
config BOARD_MIKOTO_CHARGER_CURRENT_NONE
bool "Disable charge current"
endchoice

8
app/boards/arm/mikoto/Kconfig.board
View File

@@ -1,8 +0,0 @@
# mikoto board configuration
# Copyright (c) 2020 The ZMK Contributors
# SPDX-License-Identifier: MIT
config BOARD_MIKOTO_520
bool "mikoto_520"
depends on SOC_NRF52840_QIAA

31
app/boards/arm/mikoto/Kconfig.defconfig
View File

@@ -1,31 +0,0 @@
# Electronut Labs Papyr board configuration
# Copyright (c) 2020 The ZMK Contributors
# SPDX-License-Identifier: MIT
if BOARD_MIKOTO_520
config BOARD
default "mikoto"
if USB
config USB_NRFX
default y
config USB_DEVICE_STACK
default y
endif # USB
config BT_CTLR
default BT
config PINMUX
default y
choice BOARD_MIKOTO_CHARGER_CURRENT
default BOARD_MIKOTO_CHARGER_CURRENT_100MA
endchoice
endif # BOARD_MIKOTO_520

59
app/boards/arm/mikoto/arduino_pro_micro_pins.dtsi
View File

@@ -1,59 +0,0 @@
/*
* Copyright (c) 2020 The ZMK Contributors
*
* SPDX-License-Identifier: MIT
*/
/ {
pro_micro: connector {
compatible = "arduino-pro-micro";
#gpio-cells = <2>;
gpio-map-mask = <0xffffffff 0xffffffc0>;
gpio-map-pass-thru = <0 0x3f>;
gpio-map
= <0 0 &gpio0 4 0> /* D0 */
, <1 0 &gpio0 8 0> /* D1 */
, <2 0 &gpio0 17 0> /* D2 */
, <3 0 &gpio0 20 0> /* D3 */
, <4 0 &gpio0 22 0> /* D4/A6 */
, <5 0 &gpio0 24 0> /* D5 */
, <6 0 &gpio1 0 0> /* D6/A7 */
, <7 0 &gpio1 2 0> /* D7 */
, <8 0 &gpio1 4 0> /* D8/A8 */
, <9 0 &gpio1 6 0> /* D9/A9 */
, <10 0 &gpio0 9 0> /* D10/A10 */
, <16 0 &gpio0 10 0> /* D16 */
, <14 0 &gpio1 13 0> /* D14 */
, <15 0 &gpio0 2 0> /* D15 */
, <18 0 &gpio0 29 0> /* D18/A0 */
, <19 0 &gpio0 31 0> /* D19/A1 */
, <20 0 &gpio0 25 0> /* D20/A2 */
, <21 0 &gpio0 11 0> /* D21/A3 */
;
};
pro_micro_a: connector_a {
compatible = "arduino-pro-micro";
#gpio-cells = <2>;
gpio-map-mask = <0xffffffff 0xffffffc0>;
gpio-map-pass-thru = <0 0x3f>;
gpio-map
= <0 0 &gpio0 29 0> /* D18/A0 */
, <1 0 &gpio0 31 0> /* D19/A1 */
, <2 0 &gpio0 25 0> /* D20/A2 */
, <3 0 &gpio0 11 0> /* D21/A3 */
, <6 0 &gpio0 22 0> /* D4/A6 */
, <7 0 &gpio1 0 0> /* D6/A7 */
, <8 0 &gpio1 4 0> /* D8/A8 */
, <9 0 &gpio1 6 0> /* D9/A9 */
, <10 0 &gpio0 9 0> /* D10/A10 */
;
};
};
pro_micro_d: &pro_micro {};
pro_micro_i2c: &i2c0 {};
pro_micro_spi: &spi0 {};
pro_micro_serial: &uart0 {};

5
app/boards/arm/mikoto/board.cmake
View File

@@ -1,5 +0,0 @@
# SPDX-License-Identifier: MIT
board_runner_args(nrfjprog "--nrf-family=NRF52" "--softreset")
include(${ZEPHYR_BASE}/boards/common/blackmagicprobe.board.cmake)
include(${ZEPHYR_BASE}/boards/common/nrfjprog.board.cmake)

39
app/boards/arm/mikoto/mikoto_520-pinctrl.dtsi
View File

@@ -1,39 +0,0 @@
/*
* Copyright (c) 2022 The ZMK Contributors
* SPDX-License-Identifier: MIT
*/
&pinctrl {
uart0_default: uart0_default {
group1 {
psels = <NRF_PSEL(UART_RX, 0, 4)>;
bias-pull-up;
};
group2 {
psels = <NRF_PSEL(UART_TX, 0, 8)>;
};
};
uart0_sleep: uart0_sleep {
group1 {
psels = <NRF_PSEL(UART_RX, 0, 4)>,
<NRF_PSEL(UART_TX, 0, 8)>;
low-power-enable;
};
};
i2c0_default: i2c0_default {
group1 {
psels = <NRF_PSEL(TWIM_SDA, 0, 17)>,
<NRF_PSEL(TWIM_SCL, 0, 20)>;
};
};
i2c0_sleep: i2c0_sleep {
group1 {
psels = <NRF_PSEL(TWIM_SDA, 0, 17)>,
<NRF_PSEL(TWIM_SCL, 0, 20)>;
low-power-enable;
};
};
};

126
app/boards/arm/mikoto/mikoto_520.dts
View File

@@ -1,126 +0,0 @@
/*
* Copyright (c) 2020 The ZMK Contributors
*
* SPDX-License-Identifier: MIT
*/
/dts-v1/;
#include <nordic/nrf52840_qiaa.dtsi>
#include "arduino_pro_micro_pins.dtsi"
#include "mikoto_520-pinctrl.dtsi"
/ {
model = "mikoto";
compatible = "zhiayang,mikoto";
chosen {
zephyr,code-partition = &code_partition;
zephyr,sram = &sram0;
zephyr,flash = &flash0;
zephyr,console = &cdc_acm_uart;
zmk,battery = &vbatt;
};
leds {
compatible = "gpio-leds";
blue_led: led_0 {
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
label = "Blue LED";
};
};
ext-power {
compatible = "zmk,ext-power-generic";
label = "EXT_POWER";
control-gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
init-delay-ms = <50>;
};
vbatt: vbatt {
compatible = "zmk,battery-voltage-divider";
label = "BATTERY";
io-channels = <&adc 1>;
output-ohms = <10000000>;
full-ohms = <(10000000 + 4000000)>;
};
};
&adc {
status = "okay";
};
&gpiote {
status = "okay";
};
&gpio0 {
status = "okay";
};
&gpio1 {
status = "okay";
};
&i2c0 {
compatible = "nordic,nrf-twi";
pinctrl-0 = <&i2c0_default>;
pinctrl-1 = <&i2c0_sleep>;
pinctrl-names = "default", "sleep";
};
&uart0 {
compatible = "nordic,nrf-uarte";
current-speed = <115200>;
pinctrl-0 = <&uart0_default>;
pinctrl-1 = <&uart0_sleep>;
pinctrl-names = "default", "sleep";
};
&usbd {
status = "okay";
cdc_acm_uart: cdc_acm_uart {
compatible = "zephyr,cdc-acm-uart";
label = "CDC_ACM_0";
};
};
&flash0 {
/*
* For more information, see:
* http://docs.zephyrproject.org/latest/devices/dts/flash_partitions.html
*/
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
sd_partition: partition@0 {
label = "softdevice";
reg = <0x00000000 0x00026000>;
};
code_partition: partition@26000 {
label = "code_partition";
reg = <0x00026000 0x000c6000>;
};
/*
* The flash starting at 0x000ec000 and ending at
* 0x000f3fff is reserved for use by the application.
*/
/*
* Storage partition will be used by FCB/LittleFS/NVS
* if enabled.
*/
storage_partition: partition@ec000 {
label = "storage";
reg = <0x000ec000 0x00008000>;
};
boot_partition: partition@f4000 {
label = "adafruit_boot";
reg = <0x000f4000 0x0000c000>;
};
};
};

15
app/boards/arm/mikoto/mikoto_520.yaml
View File

@@ -1,15 +0,0 @@
identifier: mikoto_520
name: mikoto_520
type: mcu
arch: arm
toolchain:
- zephyr
- gnuarmemb
- xtools
supported:
- adc
- usb_device
- ble
- ieee802154
- pwm
- watchdog

48
app/boards/arm/mikoto/pinmux.c
View File

@@ -1,48 +0,0 @@
/*
* Copyright (c) 2020 The ZMK Contributors
*
* SPDX-License-Identifier: MIT
*/
#include <zephyr/kernel.h>
#include <zephyr/device.h>
#include <zephyr/init.h>
#include <zephyr/drivers/gpio.h>
#include <zephyr/sys/sys_io.h>
#include <zephyr/devicetree.h>
static int pinmux_mikoto_init(const struct device *port) {
ARG_UNUSED(port);
#if CONFIG_BOARD_MIKOTO_520
const struct device *p0 = DEVICE_DT_GET(DT_NODELABEL(gpio0));
const struct device *p1 = DEVICE_DT_GET(DT_NODELABEL(gpio1));
#if CONFIG_BOARD_MIKOTO_CHARGER_CURRENT_40MA
gpio_pin_configure(p0, 26, GPIO_INPUT | GPIO_PULL_DOWN);
gpio_pin_configure(p1, 15, GPIO_INPUT);
#elif CONFIG_BOARD_MIKOTO_CHARGER_CURRENT_100MA
gpio_pin_configure(p0, 26, GPIO_OUTPUT);
gpio_pin_set(p0, 26, 0);
gpio_pin_configure(p1, 15, GPIO_INPUT);
#elif CONFIG_BOARD_MIKOTO_CHARGER_CURRENT_150MA
gpio_pin_configure(p0, 26, GPIO_OUTPUT);
gpio_pin_set(p0, 26, 0);
gpio_pin_configure(p1, 15, GPIO_INPUT | GPIO_PULL_DOWN);
#elif CONFIG_BOARD_MIKOTO_CHARGER_CURRENT_250MA
gpio_pin_configure(p0, 26, GPIO_INPUT);
gpio_pin_configure(p1, 15, GPIO_OUTPUT);
gpio_pin_set(p1, 15, 0);
#elif CONFIG_BOARD_MIKOTO_CHARGER_CURRENT_350MA
gpio_pin_configure(p0, 26, GPIO_OUTPUT);
gpio_pin_set(p0, 26, 0);
gpio_pin_configure(p1, 15, GPIO_OUTPUT);
gpio_pin_set(p1, 15, 0);
#elif CONFIG_BOARD_MIKOTO_CHARGER_CURRENT_NONE
gpio_pin_configure(p0, 26, GPIO_INPUT);
gpio_pin_configure(p1, 15, GPIO_INPUT);
#endif
#endif
return 0;
}
SYS_INIT(pinmux_mikoto_init, APPLICATION, CONFIG_APPLICATION_INIT_PRIORITY);

6
app/boards/arm/nice60/Kconfig.board
View File

@@ -1,6 +0,0 @@
# Copyright (c) 2021 Nick Winans
# SPDX-License-Identifier: MIT
config BOARD_NICE60
bool "nice!60"
depends on SOC_NRF52840_QIAA

7
app/boards/arm/nice_nano/Kconfig
View File

@@ -1,7 +0,0 @@
# SPDX-License-Identifier: MIT
config BOARD_ENABLE_DCDC
bool "Enable DCDC mode"
select SOC_DCDC_NRF52X
default y
depends on (BOARD_NICE_NANO || BOARD_NICE_NANO_V2)

13
app/boards/arm/nice_nano/Kconfig.board
View File

@@ -1,13 +0,0 @@
# nice!nano board configuration
# Copyright (c) 2020 Pete Johanson
# SPDX-License-Identifier: MIT
config BOARD_NICE_NANO
bool "nice!nano"
depends on SOC_NRF52840_QIAA
config BOARD_NICE_NANO_V2
bool "nice!nano v2"
depends on SOC_NRF52840_QIAA

19
app/boards/arm/nice_nano/Kconfig.defconfig
View File

@@ -1,19 +0,0 @@
# Copyright (c) 2021 The ZMK Contributors
# SPDX-License-Identifier: MIT
if BOARD_NICE_NANO || BOARD_NICE_NANO_V2
config BOARD
default "nice_nano"
if USB_DEVICE_STACK
config USB_NRFX
default y
endif # USB_DEVICE_STACK
config BT_CTLR
default BT
endif # BOARD_NICE_NANO || BOARD_NICE_NANO_V2

57
app/boards/arm/nice_nano/arduino_pro_micro_pins.dtsi
View File

@@ -1,57 +0,0 @@
/*
* Copyright (c) 2020 Pete Johanson
*
* SPDX-License-Identifier: MIT
*/
/ {
pro_micro: connector {
compatible = "arduino-pro-micro";
#gpio-cells = <2>;
gpio-map-mask = <0xffffffff 0xffffffc0>;
gpio-map-pass-thru = <0 0x3f>;
gpio-map
= <0 0 &gpio0 8 0> /* D0 */
, <1 0 &gpio0 6 0> /* D1 */
, <2 0 &gpio0 17 0> /* D2 */
, <3 0 &gpio0 20 0> /* D3 */
, <4 0 &gpio0 22 0> /* D4/A6 */
, <5 0 &gpio0 24 0> /* D5 */
, <6 0 &gpio1 0 0> /* D6/A7 */
, <7 0 &gpio0 11 0> /* D7 */
, <8 0 &gpio1 4 0> /* D8/A8 */
, <9 0 &gpio1 6 0> /* D9/A9 */
, <10 0 &gpio0 9 0> /* D10/A10 */
, <16 0 &gpio0 10 0> /* D16 */
, <14 0 &gpio1 11 0> /* D14 */
, <15 0 &gpio1 13 0> /* D15 */
, <18 0 &gpio1 15 0> /* D18/A0 */
, <19 0 &gpio0 2 0> /* D19/A1 */
, <20 0 &gpio0 29 0> /* D20/A2 */
, <21 0 &gpio0 31 0> /* D21/A3 */
;
};
pro_micro_a: connector_a {
compatible = "arduino-pro-micro";
#gpio-cells = <2>;
gpio-map-mask = <0xffffffff 0xffffffc0>;
gpio-map-pass-thru = <0 0x3f>;
gpio-map
= <0 0 &gpio1 15 0> /* D18/A0 */
, <1 0 &gpio0 2 0> /* D19/A1 */
, <2 0 &gpio0 29 0> /* D20/A2 */
, <3 0 &gpio0 31 0> /* D21/A3 */
, <6 0 &gpio0 22 0> /* D4/A6 */
, <7 0 &gpio1 0 0> /* D6/A7 */
, <8 0 &gpio1 4 0> /* D8/A8 */
, <9 0 &gpio1 6 0> /* D9/A9 */
, <10 0 &gpio0 9 0> /* D10/A10 */
;
};
};
pro_micro_d: &pro_micro {};
pro_micro_i2c: &i2c0 {};
pro_micro_spi: &spi0 {};
pro_micro_serial: &uart0 {};

5
app/boards/arm/nice_nano/board.cmake
View File

@@ -1,5 +0,0 @@
# SPDX-License-Identifier: MIT
board_runner_args(nrfjprog "--nrf-family=NRF52" "--softreset")
include(${ZEPHYR_BASE}/boards/common/blackmagicprobe.board.cmake)
include(${ZEPHYR_BASE}/boards/common/nrfjprog.board.cmake)

39
app/boards/arm/nice_nano/nice_nano-pinctrl.dtsi
View File

@@ -1,39 +0,0 @@
/*
* Copyright (c) 2022 The ZMK Contributors
* SPDX-License-Identifier: MIT
*/
&pinctrl {
uart0_default: uart0_default {
group1 {
psels = <NRF_PSEL(UART_RX, 0, 8)>;
bias-pull-up;
};
group2 {
psels = <NRF_PSEL(UART_TX, 0, 6)>;
};
};
uart0_sleep: uart0_sleep {
group1 {
psels = <NRF_PSEL(UART_RX, 0, 8)>,
<NRF_PSEL(UART_TX, 0, 6)>;
low-power-enable;
};
};
i2c0_default: i2c0_default {
group1 {
psels = <NRF_PSEL(TWIM_SDA, 0, 17)>,
<NRF_PSEL(TWIM_SCL, 0, 20)>;
};
};
i2c0_sleep: i2c0_sleep {
group1 {
psels = <NRF_PSEL(TWIM_SDA, 0, 17)>,
<NRF_PSEL(TWIM_SCL, 0, 20)>;
low-power-enable;
};
};
};

109
app/boards/arm/nice_nano/nice_nano.dtsi
View File

@@ -1,109 +0,0 @@
/*
* Copyright (c) 2021 The ZMK Contributors
*
* SPDX-License-Identifier: MIT
*/
#include <nordic/nrf52840_qiaa.dtsi>
#include "nice_nano-pinctrl.dtsi"
#include "arduino_pro_micro_pins.dtsi"
/ {
model = "nice!nano";
compatible = "nice,nano";
chosen {
zephyr,code-partition = &code_partition;
zephyr,sram = &sram0;
zephyr,flash = &flash0;
zephyr,console = &cdc_acm_uart;
};
leds {
compatible = "gpio-leds";
blue_led: led_0 {
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
label = "Blue LED";
};
};
};
&adc {
status = "okay";
};
&gpiote {
status = "okay";
};
&gpio0 {
status = "okay";
};
&gpio1 {
status = "okay";
};
&i2c0 {
compatible = "nordic,nrf-twi";
pinctrl-0 = <&i2c0_default>;
pinctrl-1 = <&i2c0_sleep>;
pinctrl-names = "default", "sleep";
};
&uart0 {
compatible = "nordic,nrf-uarte";
current-speed = <115200>;
pinctrl-0 = <&uart0_default>;
pinctrl-1 = <&uart0_sleep>;
pinctrl-names = "default", "sleep";
};
&usbd {
status = "okay";
cdc_acm_uart: cdc_acm_uart {
compatible = "zephyr,cdc-acm-uart";
label = "CDC_ACM_0";
};
};
&flash0 {
/*
* For more information, see:
* http://docs.zephyrproject.org/latest/devices/dts/flash_partitions.html
*/
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
sd_partition: partition@0 {
label = "softdevice";
reg = <0x00000000 0x00026000>;
};
code_partition: partition@26000 {
label = "code_partition";
reg = <0x00026000 0x000c6000>;
};
/*
* The flash starting at 0x000ec000 and ending at
* 0x000f3fff is reserved for use by the application.
*/
/*
* Storage partition will be used by FCB/LittleFS/NVS
* if enabled.
*/
storage_partition: partition@ec000 {
label = "storage";
reg = <0x000ec000 0x00008000>;
};
boot_partition: partition@f4000 {
label = "adafruit_boot";
reg = <0x000f4000 0x0000c000>;
};
};
};

15
app/boards/arm/nice_nano/nice_nano.yaml
View File

@@ -1,15 +0,0 @@
identifier: nice_nano
name: nice!nano
type: mcu
arch: arm
toolchain:
- zephyr
- gnuarmemb
- xtools
supported:
- adc
- usb_device
- ble
- ieee802154
- pwm
- watchdog

15
app/boards/arm/nice_nano/nice_nano_v2.yaml
View File

@@ -1,15 +0,0 @@
identifier: nice_nano_v2
name: nice!nano v2
type: mcu
arch: arm
toolchain:
- zephyr
- gnuarmemb
- xtools
supported:
- adc
- usb_device
- ble
- ieee802154
- pwm
- watchdog

10
app/boards/arm/nice_nano/nice_nano_v2.zmk.yml
View File

@@ -1,10 +0,0 @@
file_format: "1"
id: nice_nano_v2
name: nice!nano v2
type: board
arch: arm
outputs:
- usb
- ble
url: https://nicekeyboards.com/nice-nano
exposes: [pro_micro]

8
app/boards/arm/nrf52840_m2/Kconfig
View File

@@ -1,8 +0,0 @@
# Copyright (c) 2020 The ZMK Contributors
# SPDX-License-Identifier: MIT
config BOARD_ENABLE_DCDC
bool "Enable DCDC mode"
select SOC_DCDC_NRF52X
default y
depends on BOARD_NRF52840_M2

9
app/boards/arm/nrf52840_m2/Kconfig.board
View File

@@ -1,9 +0,0 @@
# Maker Diary nrf52840 M.2 board configuration
# Copyright (c) 2020 The ZMK Contributors
# SPDX-License-Identifier: MIT
config BOARD_NRF52840_M2
bool "nrf52480_m2"
depends on SOC_NRF52840_QIAA

19
app/boards/arm/nrf52840_m2/Kconfig.defconfig
View File

@@ -1,19 +0,0 @@
# Copyright (c) 2020 The ZMK Contributors
# SPDX-License-Identifier: MIT
if BOARD_NRF52840_M2
config BOARD
default "nrf52480_m2"
if USB_DEVICE_STACK
config USB_NRFX
default y
endif # USB_DEVICE_STACK
config BT_CTLR
default BT
endif # BOARD_NRF52840_M2

6
app/boards/arm/nrfmicro/CMakeLists.txt
View File

@@ -1,6 +0,0 @@
if(CONFIG_PINMUX)
zephyr_library()
zephyr_library_sources(pinmux.c)
zephyr_library_include_directories(${ZEPHYR_BASE}/drivers)
endif()

10
app/boards/arm/nrfmicro/Kconfig
View File

@@ -1,10 +0,0 @@
config BOARD_ENABLE_DCDC
bool "Enable DCDC mode"
select SOC_DCDC_NRF52X
default y
depends on (BOARD_NRFMICRO_11 || BOARD_NRFMICRO_11_FLIPPED || BOARD_NRFMICRO_13 || BOARD_NRFMICRO_13_52833)
config BOARD_NRFMICRO_CHARGER
bool "Enable battery charger"
default y
depends on (BOARD_NRFMICRO_13 || BOARD_NRFMICRO_13_52833)

20
app/boards/arm/nrfmicro/Kconfig.board
View File

@@ -1,20 +0,0 @@
# nrfmicro board configuration
# Copyright (c) 2020 The ZMK Contributors
# SPDX-License-Identifier: MIT
config BOARD_NRFMICRO_11
bool "nrfmicro_11"
depends on SOC_NRF52840_QIAA
config BOARD_NRFMICRO_11_FLIPPED
bool "nrfmicro_11_flipped"
depends on SOC_NRF52840_QIAA
config BOARD_NRFMICRO_13
bool "nrfmicro_13"
depends on SOC_NRF52840_QIAA
config BOARD_NRFMICRO_13_52833
bool "nrfmicro_13_52833"
depends on SOC_NRF52833_QIAA

31
app/boards/arm/nrfmicro/Kconfig.defconfig
View File

@@ -1,31 +0,0 @@
# Electronut Labs Papyr board configuration
# Copyright (c) 2020 The ZMK Contributors
# SPDX-License-Identifier: MIT
if BOARD_NRFMICRO_11 || BOARD_NRFMICRO_11_FLIPPED || BOARD_NRFMICRO_13 || BOARD_NRFMICRO_13_52833
config BOARD
default "nrfmicro"
if USB_DEVICE_STACK
config USB_NRFX
default y
endif # USB_DEVICE_STACK
config BT_CTLR
default BT
config PINMUX
default y
if BOARD_NRFMICRO_13 || BOARD_NRFMICRO_13_52833
config BOARD_NRFMICRO_CHARGER
default y
endif # BOARD_NRFMICRO_13 || BOARD_NRFMICRO_13_52833
endif # BOARD_NRFMICRO_11 || BOARD_NRFMICRO_11_FLIPPED || BOARD_NRFMICRO_13 || BOARD_NRFMICRO_13_52833

59
app/boards/arm/nrfmicro/arduino_pro_micro_pins.dtsi
View File

@@ -1,59 +0,0 @@
/*
* Copyright (c) 2020 The ZMK Contributors
*
* SPDX-License-Identifier: MIT
*/
/ {
pro_micro: connector {
compatible = "arduino-pro-micro";
#gpio-cells = <2>;
gpio-map-mask = <0xffffffff 0xffffffc0>;
gpio-map-pass-thru = <0 0x3f>;
gpio-map
= <0 0 &gpio0 8 0> /* D0 */
, <1 0 &gpio0 6 0> /* D1 */
, <2 0 &gpio0 15 0> /* D2 */
, <3 0 &gpio0 17 0> /* D3 */
, <4 0 &gpio0 20 0> /* D4/A6 */
, <5 0 &gpio0 13 0> /* D5 */
, <6 0 &gpio0 24 0> /* D6/A7 */
, <7 0 &gpio0 9 0> /* D7 */
, <8 0 &gpio0 10 0> /* D8/A8 */
, <9 0 &gpio1 6 0> /* D9/A9 */
, <10 0 &gpio1 11 0> /* D10/A10 */
, <16 0 &gpio0 28 0> /* D16 */
, <14 0 &gpio0 3 0> /* D14 */
, <15 0 &gpio1 13 0> /* D15 */
, <18 0 &gpio0 2 0> /* D18/A0 */
, <19 0 &gpio0 29 0> /* D19/A1 */
, <20 0 &gpio0 31 0> /* D20/A2 */
, <21 0 &gpio0 30 0> /* D21/A3 */
;
};
pro_micro_a: connector_a {
compatible = "arduino-pro-micro";
#gpio-cells = <2>;
gpio-map-mask = <0xffffffff 0xffffffc0>;
gpio-map-pass-thru = <0 0x3f>;
gpio-map
= <0 0 &gpio0 2 0> /* D18/A0 */
, <1 0 &gpio0 29 0> /* D19/A1 */
, <2 0 &gpio0 31 0> /* D20/A2 */
, <3 0 &gpio0 30 0> /* D21/A3 */
, <6 0 &gpio0 20 0> /* D4/A6 */
, <7 0 &gpio0 24 0> /* D6/A7 */
, <8 0 &gpio0 10 0> /* D8/A8 */
, <9 0 &gpio1 6 0> /* D9/A9 */
, <10 0 &gpio1 11 0> /* D10/A10 */
;
};
};
pro_micro_d: &pro_micro {};
pro_micro_i2c: &i2c0 {};
pro_micro_spi: &spi0 {};
pro_micro_serial: &uart0 {};

59
app/boards/arm/nrfmicro/arduino_pro_micro_pins_52833.dtsi
View File

@@ -1,59 +0,0 @@
/*
* Copyright (c) 2020 The ZMK Contributors
*
* SPDX-License-Identifier: MIT
*/
/ {
pro_micro: connector {
compatible = "arduino-pro-micro";
#gpio-cells = <2>;
gpio-map-mask = <0xffffffff 0xffffffc0>;
gpio-map-pass-thru = <0 0x3f>;
gpio-map
= <0 0 &gpio0 8 0> /* D0 */
, <1 0 &gpio0 6 0> /* D1 */
, <2 0 &gpio0 15 0> /* D2 */
, <3 0 &gpio0 17 0> /* D3 */
, <4 0 &gpio0 20 0> /* D4/A6 */
, <5 0 &gpio0 13 0> /* D5 */
, <6 0 &gpio0 24 0> /* D6/A7 */
, <7 0 &gpio0 9 0> /* D7 */
, <8 0 &gpio0 10 0> /* D8/A8 */
, <9 0 &gpio1 6 0> /* D9/A9 */
, <10 0 &gpio1 4 0> /* D10/A10 */
, <16 0 &gpio0 28 0> /* D16 */
, <14 0 &gpio0 3 0> /* D14 */
, <15 0 &gpio1 5 0> /* D15 */
, <18 0 &gpio0 2 0> /* D18/A0 */
, <19 0 &gpio0 29 0> /* D19/A1 */
, <20 0 &gpio0 31 0> /* D20/A2 */
, <21 0 &gpio0 30 0> /* D21/A3 */
;
};
pro_micro_a: connector_a {
compatible = "arduino-pro-micro";
#gpio-cells = <2>;
gpio-map-mask = <0xffffffff 0xffffffc0>;
gpio-map-pass-thru = <0 0x3f>;
gpio-map
= <0 0 &gpio0 2 0> /* D18/A0 */
, <1 0 &gpio0 29 0> /* D19/A1 */
, <2 0 &gpio0 31 0> /* D20/A2 */
, <3 0 &gpio0 30 0> /* D21/A3 */
, <6 0 &gpio0 20 0> /* D4/A6 */
, <7 0 &gpio0 24 0> /* D6/A7 */
, <8 0 &gpio0 10 0> /* D8/A8 */
, <9 0 &gpio1 6 0> /* D9/A9 */
, <10 0 &gpio1 11 0> /* D10/A10 */
;
};
};
pro_micro_d: &pro_micro {};
pro_micro_i2c: &i2c0 {};
pro_micro_spi: &spi0 {};
pro_micro_serial: &uart0 {};

57
app/boards/arm/nrfmicro/arduino_pro_micro_pins_flipped.dtsi
View File

@@ -1,57 +0,0 @@
/*
* Copyright (c) 2020 The ZMK Contributors
*
* SPDX-License-Identifier: MIT
*/
/ {
pro_micro: connector {
compatible = "arduino-pro-micro";
#gpio-cells = <2>;
gpio-map-mask = <0xffffffff 0xffffffc0>;
gpio-map-pass-thru = <0 0x3f>;
gpio-map
= <0 0 &gpio0 8 0> /* D0 */
, <1 0 &gpio0 6 0> /* D1 */
, <2 0 &gpio0 30 0> /* D2 */
, <3 0 &gpio0 31 0> /* D3 */
, <4 0 &gpio0 29 0> /* D4/A6 */
, <5 0 &gpio0 2 0> /* D5 */
, <6 0 &gpio1 13 0> /* D6/A7 */
, <7 0 &gpio0 3 0> /* D7 */
, <8 0 &gpio0 28 0> /* D8/A8 */
, <9 0 &gpio1 11 0> /* D9/A9 */
, <10 0 &gpio1 6 0> /* D10/A10 */
, <16 0 &gpio0 10 0> /* D16 */
, <14 0 &gpio0 9 0> /* D14 */
, <15 0 &gpio0 24 0> /* D15 */
, <18 0 &gpio0 13 0> /* D18/A0 */
, <19 0 &gpio0 20 0> /* D19/A1 */
, <20 0 &gpio0 17 0> /* D20/A2 */
, <21 0 &gpio0 15 0> /* D21/A3 */
;
};
pro_micro_a: connector_a {
compatible = "arduino-pro-micro";
#gpio-cells = <2>;
gpio-map-mask = <0xffffffff 0xffffffc0>;
gpio-map-pass-thru = <0 0x3f>;
gpio-map
= <0 0 &gpio0 13 0> /* D18/A0 */
, <1 0 &gpio0 20 0> /* D19/A1 */
, <2 0 &gpio0 17 0> /* D20/A2 */
, <3 0 &gpio0 15 0> /* D21/A3 */
, <6 0 &gpio0 29 0> /* D4/A6 */
, <7 0 &gpio1 13 0> /* D6/A7 */
, <8 0 &gpio0 28 0> /* D8/A8 */
, <9 0 &gpio1 11 0> /* D9/A9 */
, <10 0 &gpio1 6 0> /* D10/A10 */
;
};
};
pro_micro_d: &pro_micro {};
pro_micro_i2c: &i2c0 {};
pro_micro_spi: &spi0 {};
pro_micro_serial: &uart0 {};

5
app/boards/arm/nrfmicro/board.cmake
View File

@@ -1,5 +0,0 @@
# SPDX-License-Identifier: MIT
board_runner_args(nrfjprog "--nrf-family=NRF52" "--softreset")
include(${ZEPHYR_BASE}/boards/common/blackmagicprobe.board.cmake)
include(${ZEPHYR_BASE}/boards/common/nrfjprog.board.cmake)

39
app/boards/arm/nrfmicro/nrfmicro-flipped-pinctrl.dtsi
View File

@@ -1,39 +0,0 @@
/*
* Copyright (c) 2022 The ZMK Contributors
* SPDX-License-Identifier: MIT
*/
&pinctrl {
uart0_default: uart0_default {
group1 {
psels = <NRF_PSEL(UART_RX, 0, 8)>;
bias-pull-up;
};
group2 {
psels = <NRF_PSEL(UART_TX, 0, 6)>;
};
};
uart0_sleep: uart0_sleep {
group1 {
psels = <NRF_PSEL(UART_RX, 0, 8)>,
<NRF_PSEL(UART_TX, 0, 6)>;
low-power-enable;
};
};
i2c0_default: i2c0_default {
group1 {
psels = <NRF_PSEL(TWIM_SDA, 0, 30)>,
<NRF_PSEL(TWIM_SCL, 0, 31)>;
};
};
i2c0_sleep: i2c0_sleep {
group1 {
psels = <NRF_PSEL(TWIM_SDA, 0, 30)>,
<NRF_PSEL(TWIM_SCL, 0, 31)>;
low-power-enable;
};
};
};

39
app/boards/arm/nrfmicro/nrfmicro-pinctrl.dtsi
View File

@@ -1,39 +0,0 @@
/*
* Copyright (c) 2022 The ZMK Contributors
* SPDX-License-Identifier: MIT
*/
&pinctrl {
uart0_default: uart0_default {
group1 {
psels = <NRF_PSEL(UART_RX, 0, 8)>;
bias-pull-up;
};
group2 {
psels = <NRF_PSEL(UART_TX, 0, 6)>;
};
};
uart0_sleep: uart0_sleep {
group1 {
psels = <NRF_PSEL(UART_RX, 0, 8)>,
<NRF_PSEL(UART_TX, 0, 6)>;
low-power-enable;
};
};
i2c0_default: i2c0_default {
group1 {
psels = <NRF_PSEL(TWIM_SDA, 0, 15)>,
<NRF_PSEL(TWIM_SCL, 0, 17)>;
};
};
i2c0_sleep: i2c0_sleep {
group1 {
psels = <NRF_PSEL(TWIM_SDA, 0, 15)>,
<NRF_PSEL(TWIM_SCL, 0, 17)>;
low-power-enable;
};
};
};

112
app/boards/arm/nrfmicro/nrfmicro_11.dts
View File

@@ -1,112 +0,0 @@
/*
* Copyright (c) 2020 The ZMK Contributors
*
* SPDX-License-Identifier: MIT
*/
/dts-v1/;
#include <nordic/nrf52840_qiaa.dtsi>
#include "arduino_pro_micro_pins.dtsi"
#include "nrfmicro-pinctrl.dtsi"
/ {
model = "nrfmicro";
compatible = "joric,nrfmicro";
chosen {
zephyr,code-partition = &code_partition;
zephyr,sram = &sram0;
zephyr,flash = &flash0;
zephyr,console = &cdc_acm_uart;
};
leds {
compatible = "gpio-leds";
blue_led: led_0 {
gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
label = "Blue LED";
};
};
ext-power {
compatible = "zmk,ext-power-generic";
label = "EXT_POWER";
control-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
};
};
&gpiote {
status = "okay";
};
&gpio0 {
status = "okay";
};
&gpio1 {
status = "okay";
};
&i2c0 {
compatible = "nordic,nrf-twi";
pinctrl-0 = <&i2c0_default>;
pinctrl-1 = <&i2c0_sleep>;
pinctrl-names = "default", "sleep";
};
&uart0 {
compatible = "nordic,nrf-uarte";
current-speed = <115200>;
pinctrl-0 = <&uart0_default>;
pinctrl-1 = <&uart0_sleep>;
pinctrl-names = "default", "sleep";
};
&usbd {
status = "okay";
cdc_acm_uart: cdc_acm_uart {
compatible = "zephyr,cdc-acm-uart";
label = "CDC_ACM_0";
};
};
&flash0 {
/*
* For more information, see:
* http://docs.zephyrproject.org/latest/devices/dts/flash_partitions.html
*/
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
sd_partition: partition@0 {
label = "softdevice";
reg = <0x00000000 0x00026000>;
};
code_partition: partition@26000 {
label = "code_partition";
reg = <0x00026000 0x000c6000>;
};
/*
* The flash starting at 0x000ec000 and ending at
* 0x000f3fff is reserved for use by the application.
*/
/*
* Storage partition will be used by FCB/LittleFS/NVS
* if enabled.
*/
storage_partition: partition@ec000 {
label = "storage";
reg = <0x000ec000 0x00008000>;
};
boot_partition: partition@f4000 {
label = "adafruit_boot";
reg = <0x000f4000 0x0000c000>;
};
};
};

15
app/boards/arm/nrfmicro/nrfmicro_11.yaml
View File

@@ -1,15 +0,0 @@
identifier: nrfmicro_11
name: nrfmicro_11
type: mcu
arch: arm
toolchain:
- zephyr
- gnuarmemb
- xtools
supported:
- adc
- usb_device
- ble
- ieee802154
- pwm
- watchdog

112
app/boards/arm/nrfmicro/nrfmicro_11_flipped.dts
View File

@@ -1,112 +0,0 @@
/*
* Copyright (c) 2020 The ZMK Contributors
*
* SPDX-License-Identifier: MIT
*/
/dts-v1/;
#include <nordic/nrf52840_qiaa.dtsi>
#include "arduino_pro_micro_pins_flipped.dtsi"
#include "nrfmicro-flipped-pinctrl.dtsi"
/ {
model = "nrfmicro";
compatible = "joric,nrfmicro";
chosen {
zephyr,code-partition = &code_partition;
zephyr,sram = &sram0;
zephyr,flash = &flash0;
zephyr,console = &cdc_acm_uart;
};
leds {
compatible = "gpio-leds";
blue_led: led_0 {
gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
label = "Blue LED";
};
};
ext-power {
compatible = "zmk,ext-power-generic";
label = "EXT_POWER";
control-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
};
};
&gpiote {
status = "okay";
};
&gpio0 {
status = "okay";
};
&gpio1 {
status = "okay";
};
&i2c0 {
compatible = "nordic,nrf-twi";
pinctrl-0 = <&i2c0_default>;
pinctrl-1 = <&i2c0_sleep>;
pinctrl-names = "default", "sleep";
};
&uart0 {
compatible = "nordic,nrf-uarte";
current-speed = <115200>;
pinctrl-0 = <&uart0_default>;
pinctrl-1 = <&uart0_sleep>;
pinctrl-names = "default", "sleep";
};
&usbd {
status = "okay";
cdc_acm_uart: cdc_acm_uart {
compatible = "zephyr,cdc-acm-uart";
label = "CDC_ACM_0";
};
};
&flash0 {
/*
* For more information, see:
* http://docs.zephyrproject.org/latest/devices/dts/flash_partitions.html
*/
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
sd_partition: partition@0 {
label = "softdevice";
reg = <0x00000000 0x00026000>;
};
code_partition: partition@26000 {
label = "code_partition";
reg = <0x00026000 0x000c6000>;
};
/*
* The flash starting at 0x000ec000 and ending at
* 0x000f3fff is reserved for use by the application.
*/
/*
* Storage partition will be used by FCB/LittleFS/NVS
* if enabled.
*/
storage_partition: partition@ec000 {
label = "storage";
reg = <0x000ec000 0x00008000>;
};
boot_partition: partition@f4000 {
label = "adafruit_boot";
reg = <0x000f4000 0x0000c000>;
};
};
};

15
app/boards/arm/nrfmicro/nrfmicro_11_flipped.yaml
View File

@@ -1,15 +0,0 @@
identifier: nrfmicro_11_flipped
name: nrfmicro_11_flipped
type: mcu
arch: arm
toolchain:
- zephyr
- gnuarmemb
- xtools
supported:
- adc
- usb_device
- ble
- ieee802154
- pwm
- watchdog

28
app/boards/arm/nrfmicro/nrfmicro_11_flipped_defconfig
View File

@@ -1,28 +0,0 @@
# SPDX-License-Identifier: MIT
CONFIG_SOC_SERIES_NRF52X=y
CONFIG_SOC_NRF52840_QIAA=y
CONFIG_BOARD_NRFMICRO_11_FLIPPED=y
# Enable MPU
CONFIG_ARM_MPU=y
CONFIG_PINCTRL=y
# enable GPIO
CONFIG_GPIO=y
CONFIG_USE_DT_CODE_PARTITION=y
CONFIG_BUILD_OUTPUT_UF2=y
CONFIG_MPU_ALLOW_FLASH_WRITE=y
CONFIG_NVS=y
CONFIG_SETTINGS_NVS=y
CONFIG_FLASH=y
CONFIG_FLASH_PAGE_LAYOUT=y
CONFIG_FLASH_MAP=y
CONFIG_CLOCK_CONTROL_NRF=y
CONFIG_CLOCK_CONTROL_NRF_K32SRC_RC=y
CONFIG_ZMK_USB=y
CONFIG_ZMK_BLE=y

125
app/boards/arm/nrfmicro/nrfmicro_13.dts
View File

@@ -1,125 +0,0 @@
/*
* Copyright (c) 2020 The ZMK Contributors
*
* SPDX-License-Identifier: MIT
*/
/dts-v1/;
#include <nordic/nrf52840_qiaa.dtsi>
#include "arduino_pro_micro_pins.dtsi"
#include "nrfmicro-pinctrl.dtsi"
/ {
model = "nrfmicro";
compatible = "joric,nrfmicro";
chosen {
zephyr,code-partition = &code_partition;
zephyr,sram = &sram0;
zephyr,flash = &flash0;
zephyr,console = &cdc_acm_uart;
zmk,battery = &vbatt;
};
leds {
compatible = "gpio-leds";
blue_led: led_0 {
gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
label = "Blue LED";
};
};
ext-power {
compatible = "zmk,ext-power-generic";
label = "EXT_POWER";
control-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
};
vbatt: vbatt {
compatible = "zmk,battery-voltage-divider";
label = "BATTERY";
io-channels = <&adc 2>;
output-ohms = <2000000>;
full-ohms = <(2000000 + 820000)>;
};
};
&adc {
status = "okay";
};
&gpiote {
status = "okay";
};
&gpio0 {
status = "okay";
};
&gpio1 {
status = "okay";
};
&i2c0 {
compatible = "nordic,nrf-twi";
pinctrl-0 = <&i2c0_default>;
pinctrl-1 = <&i2c0_sleep>;
pinctrl-names = "default", "sleep";
};
&uart0 {
compatible = "nordic,nrf-uarte";
current-speed = <115200>;
pinctrl-0 = <&uart0_default>;
pinctrl-1 = <&uart0_sleep>;
pinctrl-names = "default", "sleep";
};
&usbd {
status = "okay";
cdc_acm_uart: cdc_acm_uart {
compatible = "zephyr,cdc-acm-uart";
label = "CDC_ACM_0";
};
};
&flash0 {
/*
* For more information, see:
* http://docs.zephyrproject.org/latest/devices/dts/flash_partitions.html
*/
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
sd_partition: partition@0 {
label = "softdevice";
reg = <0x00000000 0x00026000>;
};
code_partition: partition@26000 {
label = "code_partition";
reg = <0x00026000 0x000c6000>;
};
/*
* The flash starting at 0x000ec000 and ending at
* 0x000f3fff is reserved for use by the application.
*/
/*
* Storage partition will be used by FCB/LittleFS/NVS
* if enabled.
*/
storage_partition: partition@ec000 {
label = "storage";
reg = <0x000ec000 0x00008000>;
};
boot_partition: partition@f4000 {
label = "adafruit_boot";
reg = <0x000f4000 0x0000c000>;
};
};
};

15
app/boards/arm/nrfmicro/nrfmicro_13.yaml
View File

@@ -1,15 +0,0 @@
identifier: nrfmicro_13
name: nrfmicro_13
type: mcu
arch: arm
toolchain:
- zephyr
- gnuarmemb
- xtools
supported:
- adc
- usb_device
- ble
- ieee802154
- pwm
- watchdog

125
app/boards/arm/nrfmicro/nrfmicro_13_52833.dts
View File

@@ -1,125 +0,0 @@
/*
* Copyright (c) 2020 The ZMK Contributors
*
* SPDX-License-Identifier: MIT
*/
/dts-v1/;
#include <nordic/nrf52833_qiaa.dtsi>
#include "arduino_pro_micro_pins_52833.dtsi"
#include "nrfmicro-pinctrl.dtsi"
/ {
model = "nrfmicro";
compatible = "joric,nrfmicro";
chosen {
zephyr,code-partition = &code_partition;
zephyr,sram = &sram0;
zephyr,flash = &flash0;
zephyr,console = &cdc_acm_uart;
zmk,battery = &vbatt;
};
leds {
compatible = "gpio-leds";
blue_led: led_0 {
gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
label = "Blue LED";
};
};
ext-power {
compatible = "zmk,ext-power-generic";
label = "EXT_POWER";
control-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
};
vbatt: vbatt {
compatible = "zmk,battery-voltage-divider";
label = "BATTERY";
io-channels = <&adc 2>;
output-ohms = <2000000>;
full-ohms = <(2000000 + 820000)>;
};
};
&adc {
status = "okay";
};
&gpiote {
status = "okay";
};
&gpio0 {
status = "okay";
};
&gpio1 {
status = "okay";
};
&i2c0 {
compatible = "nordic,nrf-twi";
pinctrl-0 = <&i2c0_default>;
pinctrl-1 = <&i2c0_sleep>;
pinctrl-names = "default", "sleep";
};
&uart0 {
compatible = "nordic,nrf-uarte";
current-speed = <115200>;
pinctrl-0 = <&uart0_default>;
pinctrl-1 = <&uart0_sleep>;
pinctrl-names = "default", "sleep";
};
&usbd {
status = "okay";
cdc_acm_uart: cdc_acm_uart {
compatible = "zephyr,cdc-acm-uart";
label = "CDC_ACM_0";
};
};
&flash0 {
/*
* For more information, see:
* http://docs.zephyrproject.org/latest/devices/dts/flash_partitions.html
*/
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
sd_partition: partition@0 {
label = "softdevice";
reg = <0x00000000 0x00026000>;
};
code_partition: partition@26000 {
label = "code_partition";
reg = <0x00026000 0x00046000>;
};
/*
* The flash starting at 0x0006c000 and ending at
* 0x00073fff is reserved for use by the application.
*/
/*
* Storage partition will be used by FCB/LittleFS/NVS
* if enabled.
*/
storage_partition: partition@6c000 {
label = "storage";
reg = <0x0006c000 0x00008000>;
};
boot_partition: partition@74000 {
label = "adafruit_boot";
reg = <0x00074000 0x0000c000>;
};
};
};

15
app/boards/arm/nrfmicro/nrfmicro_13_52833.yaml
View File

@@ -1,15 +0,0 @@
identifier: nrfmicro_13_52833
name: nrfmicro_13_52833
type: mcu
arch: arm
toolchain:
- zephyr
- gnuarmemb
- xtools
supported:
- adc
- usb_device
- ble
- ieee802154
- pwm
- watchdog

10
app/boards/arm/nrfmicro/nrfmicro_13_52833.zmk.yml
View File

@@ -1,10 +0,0 @@
file_format: "1"
id: nrfmicro_13_52833
name: nRFMicro 1.3/1.4 (nRF52833)
type: board
arch: arm
outputs:
- usb
- ble
url: https://github.com/joric/nrfmicro/
exposes: [pro_micro]

29
app/boards/arm/nrfmicro/pinmux.c
View File

@@ -1,29 +0,0 @@
/*
* Copyright (c) 2020 The ZMK Contributors
*
* SPDX-License-Identifier: MIT
*/
#include <zephyr/kernel.h>
#include <zephyr/device.h>
#include <zephyr/init.h>
#include <zephyr/drivers/gpio.h>
#include <zephyr/sys/sys_io.h>
#include <zephyr/devicetree.h>
static int pinmux_nrfmicro_init(const struct device *port) {
ARG_UNUSED(port);
#if (CONFIG_BOARD_NRFMICRO_13 || CONFIG_BOARD_NRFMICRO_13_52833)
const struct device *p0 = DEVICE_DT_GET(DT_NODELABEL(gpio0));
#if CONFIG_BOARD_NRFMICRO_CHARGER
gpio_pin_configure(p0, 5, GPIO_OUTPUT);
gpio_pin_set(p0, 5, 0);
#else
gpio_pin_configure(p0, 5, GPIO_INPUT);
#endif
#endif
return 0;
}
SYS_INIT(pinmux_nrfmicro_init, APPLICATION, CONFIG_APPLICATION_INIT_PRIORITY);

7
app/boards/arm/pillbug/Kconfig
View File

@@ -1,7 +0,0 @@
# SPDX-License-Identifier: MIT
config BOARD_ENABLE_DCDC
bool "Enable DCDC mode"
select SOC_DCDC_NRF52X
default y
depends on (BOARD_PILLBUG)

6
app/boards/arm/pillbug/Kconfig.board
View File

@@ -1,6 +0,0 @@
# Copyright (c) 2022 The ZMK Contributors
# SPDX-License-Identifier: MIT
config BOARD_PILLBUG
bool "PillBug"
depends on SOC_NRF52840_QIAA

50
app/boards/arm/pillbug/blackpill_pins.dtsi
View File

@@ -1,50 +0,0 @@
/*
* Copyright (c) 2022 Kyle McCreery
*
* SPDX-License-Identifier: MIT
*/
/ {
blackpill: connector {
compatible = "blackpill";
#gpio-cells = <2>;
gpio-map-mask = <0xffffffff 0xffffffc0>;
gpio-map-pass-thru = <0 0x3f>;
gpio-map
= <2 0 &gpio0 9 0> /* PC13 */
, <3 0 &gpio0 10 0> /* PC14 */
, <4 0 &gpio1 6 0> /* PC15 */
, <10 0 &gpio0 25 0> /* PA0 */
, <11 0 &gpio0 5 0> /* PA1 */
, <12 0 &gpio1 15 0> /* PA2 */
, <13 0 &gpio0 2 0> /* PA3 */
, <14 0 &gpio1 11 0> /* PA4 */
, <15 0 &gpio1 8 0> /* PA5 */
, <16 0 &gpio0 26 0> /* PA6 */
, <17 0 &gpio0 11 0> /* PA7 */
, <18 0 &gpio1 9 0> /* PB0 */
, <19 0 &gpio1 14 0> /* PB1 */
, <20 0 &gpio0 3 0> /* PB2 */
, <21 0 &gpio0 31 0> /* PB10 */
, <25 0 &gpio0 12 0> /* PB12 */
, <26 0 &gpio0 19 0> /* PB13 */
, <27 0 &gpio1 1 0> /* PB14 */
, <28 0 &gpio0 29 0> /* PB15 */
, <29 0 &gpio1 13 0> /* PA8 */
, <30 0 &gpio0 6 0> /* PA9 */
, <31 0 &gpio0 8 0> /* PA10 */
, <38 0 &gpio1 0 0> /* PA15 */
, <39 0 &gpio1 10 0> /* PB3 */
, <40 0 &gpio1 2 0> /* PB4 */
, <41 0 &gpio1 4 0> /* PB5 */
, <42 0 &gpio0 13 0> /* PB6 */
, <43 0 &gpio0 15 0> /* PB7 */
, <45 0 &gpio0 17 0> /* PB8 */
, <46 0 &gpio0 24 0> /* PB9 */
;
};
};
blackpill_i2c: &i2c0 {};
blackpill_spi: &spi1 {};
blackpill_serial: &uart0 {};

136
app/boards/arm/pillbug/pillbug.dts
View File

@@ -1,136 +0,0 @@
/*
* Copyright (c) 2022 The ZMK Contributors
*
* SPDX-License-Identifier: MIT
*/
/dts-v1/;
#include <nordic/nrf52840_qiaa.dtsi>
#include "pillbug-pinctrl.dtsi"
#include "blackpill_pins.dtsi"
/ {
model = "PillBug";
compatible = "pillbug";
chosen {
zephyr,code-partition = &code_partition;
zephyr,sram = &sram0;
zephyr,flash = &flash0;
zephyr,console = &cdc_acm_uart;
zmk,battery = &vbatt;
};
leds {
compatible = "gpio-leds";
blue_led: led_0 {
gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
label = "Blue LED";
};
};
ext-power {
compatible = "zmk,ext-power-generic";
label = "EXT_POWER";
control-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
init-delay-ms = <50>;
};
vbatt: vbatt {
compatible = "zmk,battery-voltage-divider";
label = "BATTERY";
io-channels = <&adc 2>;
output-ohms = <2000000>;
full-ohms = <(2000000 + 820000)>;
};
};
&adc {
status = "okay";
};
&gpiote {
status = "okay";
};
&gpio0 {
status = "okay";
};
&gpio1 {
status = "okay";
};
&i2c0 {
compatible = "nordic,nrf-twi";
pinctrl-0 = <&i2c0_default>;
pinctrl-1 = <&i2c0_sleep>;
pinctrl-names = "default", "sleep";
};
&spi1 {
status = "disabled";
compatible = "nordic,nrf-spim";
pinctrl-0 = <&spi1_default>;
pinctrl-1 = <&spi1_sleep>;
pinctrl-names = "default", "sleep";
};
&uart0 {
compatible = "nordic,nrf-uarte";
current-speed = <115200>;
pinctrl-0 = <&uart0_default>;
pinctrl-1 = <&uart0_sleep>;
pinctrl-names = "default", "sleep";
};
&usbd {
status = "okay";
cdc_acm_uart: cdc_acm_uart {
compatible = "zephyr,cdc-acm-uart";
label = "CDC_ACM_0";
};
};
&flash0 {
/*
* For more information, see:
* http://docs.zephyrproject.org/latest/devices/dts/flash_partitions.html
*/
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
sd_partition: partition@0 {
label = "mbr";
reg = <0x00000000 0x00001000>;
};
code_partition: partition@1000 {
label = "code_partition";
reg = <0x00001000 0x000d3000>;
};
/*
* The flash starting at 0x000d4000 and ending at
* 0x000f3fff is reserved for use by the application.
*/
/*
* Storage partition will be used by FCB/LittleFS/NVS
* if enabled.
*/
storage_partition: partition@d4000 {
label = "storage";
reg = <0x000d4000 0x00020000>;
};
boot_partition: partition@f4000 {
label = "adafruit_boot";
reg = <0x000f4000 0x0000c000>;
};
};
};

15
app/boards/arm/pillbug/pillbug.yaml
View File

@@ -1,15 +0,0 @@
identifier: pillbug
name: PillBug
type: mcu
arch: arm
toolchain:
- zephyr
- gnuarmemb
- xtools
supported:
- adc
- usb_device
- ble
- ieee802154
- pwm
- watchdog

8
app/boards/arm/proton_c/Kconfig.board
View File

@@ -1,8 +0,0 @@
# QMK Proton-C board configuration
# Copyright (c) 2020 Pete Johanson
# SPDX-License-Identifier: MIT
config BOARD_QMK_PROTON_C
bool "QMK Proton-C"
depends on SOC_STM32F303XC

Some files were not shown because too many files have changed in this diff Show More