forked from kofal.net/zmk
refactor: Replace tabs with spaces
Standardized indentation to use spaces with a new pre-commit hook.
This commit is contained in:
Joel Spadin
committed by
Pete Johanson
Pete Johanson
parent
32ae776c42
commit
94061bb916
@@ -2,4 +2,4 @@
|
||||
# SPDX-License-Identifier: MIT
|
||||
|
||||
config SHIELD_ZMK_UNO
|
||||
def_bool $(shields_list_contains,zmk_uno)
|
||||
def_bool $(shields_list_contains,zmk_uno)
|
||||
|
||||
@@ -8,172 +8,172 @@
|
||||
#include <dt-bindings/zmk/matrix_transform.h>
|
||||
|
||||
&arduino_i2c {
|
||||
status = "okay";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&arduino_spi {
|
||||
status = "okay";
|
||||
status = "okay";
|
||||
|
||||
led_strip: ws2812@0 {
|
||||
compatible = "worldsemi,ws2812-spi";
|
||||
led_strip: ws2812@0 {
|
||||
compatible = "worldsemi,ws2812-spi";
|
||||
|
||||
/* SPI */
|
||||
reg = <0>; /* ignored, but necessary for SPI bindings */
|
||||
spi-max-frequency = <4000000>;
|
||||
/* SPI */
|
||||
reg = <0>; /* ignored, but necessary for SPI bindings */
|
||||
spi-max-frequency = <4000000>;
|
||||
|
||||
/* WS2812 */
|
||||
chain-length = <7>; /* 4 underglow + 3 per-key LEDs */
|
||||
spi-one-frame = <0x70>;
|
||||
spi-zero-frame = <0x40>;
|
||||
/* WS2812 */
|
||||
chain-length = <7>; /* 4 underglow + 3 per-key LEDs */
|
||||
spi-one-frame = <0x70>;
|
||||
spi-zero-frame = <0x40>;
|
||||
|
||||
color-mapping = <LED_COLOR_ID_GREEN LED_COLOR_ID_RED LED_COLOR_ID_BLUE>;
|
||||
};
|
||||
color-mapping = <LED_COLOR_ID_GREEN LED_COLOR_ID_RED LED_COLOR_ID_BLUE>;
|
||||
};
|
||||
};
|
||||
|
||||
/ {
|
||||
chosen {
|
||||
zmk,kscan = &kscan_matrix_comp;
|
||||
zmk,backlight = &backlight;
|
||||
zmk,underglow = &led_strip;
|
||||
zmk,matrix-transform = &matrix_transform;
|
||||
};
|
||||
chosen {
|
||||
zmk,kscan = &kscan_matrix_comp;
|
||||
zmk,backlight = &backlight;
|
||||
zmk,underglow = &led_strip;
|
||||
zmk,matrix-transform = &matrix_transform;
|
||||
};
|
||||
|
||||
// Commented out until we add more powerful power domain support
|
||||
// external_power {
|
||||
// compatible = "zmk,ext-power-generic";
|
||||
// label = "EXT_POWER";
|
||||
// init-delay-ms = <200>;
|
||||
// control-gpios = <&arduino_header 1 GPIO_ACTIVE_LOW>;
|
||||
// };
|
||||
// Commented out until we add more powerful power domain support
|
||||
// external_power {
|
||||
// compatible = "zmk,ext-power-generic";
|
||||
// label = "EXT_POWER";
|
||||
// init-delay-ms = <200>;
|
||||
// control-gpios = <&arduino_header 1 GPIO_ACTIVE_LOW>;
|
||||
// };
|
||||
|
||||
rgb_power {
|
||||
compatible = "zmk,ext-power-generic";
|
||||
label = "EXT_POWER";
|
||||
// label = "RGB_POWER";
|
||||
init-delay-ms = <200>;
|
||||
control-gpios = <&arduino_header 1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
rgb_power {
|
||||
compatible = "zmk,ext-power-generic";
|
||||
label = "EXT_POWER";
|
||||
// label = "RGB_POWER";
|
||||
init-delay-ms = <200>;
|
||||
control-gpios = <&arduino_header 1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
backlight: gpioleds {
|
||||
compatible = "gpio-leds";
|
||||
label = "Backlight LEDs";
|
||||
gpio_led_0 {
|
||||
gpios = <&arduino_header 12 GPIO_ACTIVE_HIGH>;
|
||||
label = "Backlight LED 0";
|
||||
};
|
||||
};
|
||||
backlight: gpioleds {
|
||||
compatible = "gpio-leds";
|
||||
label = "Backlight LEDs";
|
||||
gpio_led_0 {
|
||||
gpios = <&arduino_header 12 GPIO_ACTIVE_HIGH>;
|
||||
label = "Backlight LED 0";
|
||||
};
|
||||
};
|
||||
|
||||
matrix_transform: matrix_transform {
|
||||
compatible = "zmk,matrix-transform";
|
||||
rows = <3>;
|
||||
columns = <4>;
|
||||
matrix_transform: matrix_transform {
|
||||
compatible = "zmk,matrix-transform";
|
||||
rows = <3>;
|
||||
columns = <4>;
|
||||
|
||||
map = <
|
||||
RC(0,0) RC(0,1)
|
||||
RC(1,0) RC(1,1)
|
||||
RC(2,0) RC(2,1) RC(2,2)
|
||||
>;
|
||||
};
|
||||
map = <
|
||||
RC(0,0) RC(0,1)
|
||||
RC(1,0) RC(1,1)
|
||||
RC(2,0) RC(2,1) RC(2,2)
|
||||
>;
|
||||
};
|
||||
|
||||
direct_matrix_transform: direct_matrix_transform {
|
||||
compatible = "zmk,matrix-transform";
|
||||
rows = <3>;
|
||||
columns = <4>;
|
||||
direct_matrix_transform: direct_matrix_transform {
|
||||
compatible = "zmk,matrix-transform";
|
||||
rows = <3>;
|
||||
columns = <4>;
|
||||
|
||||
map = <
|
||||
RC(0,0) RC(0,1)
|
||||
RC(0,2) RC(0,3)
|
||||
RC(1,0) RC(1,1) RC(1,2)
|
||||
>;
|
||||
};
|
||||
map = <
|
||||
RC(0,0) RC(0,1)
|
||||
RC(0,2) RC(0,3)
|
||||
RC(1,0) RC(1,1) RC(1,2)
|
||||
>;
|
||||
};
|
||||
|
||||
kscan_matrix_comp: kscan_matrix_comp {
|
||||
compatible = "zmk,kscan-composite";
|
||||
rows = <1>;
|
||||
columns = <7>;
|
||||
kscan_matrix_comp: kscan_matrix_comp {
|
||||
compatible = "zmk,kscan-composite";
|
||||
rows = <1>;
|
||||
columns = <7>;
|
||||
|
||||
label = "KSCAN_MATRIX_COMP";
|
||||
label = "KSCAN_MATRIX_COMP";
|
||||
|
||||
matrix {
|
||||
kscan = <&kscan_matrix>;
|
||||
};
|
||||
matrix {
|
||||
kscan = <&kscan_matrix>;
|
||||
};
|
||||
|
||||
toggle {
|
||||
kscan = <&kscan_sp3t_toggle>;
|
||||
row-offset = <2>;
|
||||
};
|
||||
toggle {
|
||||
kscan = <&kscan_sp3t_toggle>;
|
||||
row-offset = <2>;
|
||||
};
|
||||
|
||||
};
|
||||
};
|
||||
|
||||
kscan_direct_comp: kscan_direct_comp {
|
||||
compatible = "zmk,kscan-composite";
|
||||
kscan_direct_comp: kscan_direct_comp {
|
||||
compatible = "zmk,kscan-composite";
|
||||
|
||||
label = "KSCAN_DIRECT_COMP";
|
||||
status = "disabled";
|
||||
label = "KSCAN_DIRECT_COMP";
|
||||
status = "disabled";
|
||||
|
||||
matrix {
|
||||
kscan = <&kscan_direct>;
|
||||
};
|
||||
matrix {
|
||||
kscan = <&kscan_direct>;
|
||||
};
|
||||
|
||||
toggle {
|
||||
kscan = <&kscan_sp3t_toggle>;
|
||||
row-offset = <1>;
|
||||
};
|
||||
toggle {
|
||||
kscan = <&kscan_sp3t_toggle>;
|
||||
row-offset = <1>;
|
||||
};
|
||||
|
||||
};
|
||||
};
|
||||
|
||||
kscan_matrix: kscan_matrix {
|
||||
compatible = "zmk,kscan-gpio-matrix";
|
||||
kscan_matrix: kscan_matrix {
|
||||
compatible = "zmk,kscan-gpio-matrix";
|
||||
|
||||
diode-direction = "col2row";
|
||||
diode-direction = "col2row";
|
||||
|
||||
col-gpios
|
||||
= <&arduino_header 10 GPIO_ACTIVE_HIGH>
|
||||
, <&arduino_header 9 GPIO_ACTIVE_HIGH>
|
||||
;
|
||||
col-gpios
|
||||
= <&arduino_header 10 GPIO_ACTIVE_HIGH>
|
||||
, <&arduino_header 9 GPIO_ACTIVE_HIGH>
|
||||
;
|
||||
|
||||
row-gpios
|
||||
= <&arduino_header 13 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
|
||||
, <&arduino_header 11 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
|
||||
;
|
||||
row-gpios
|
||||
= <&arduino_header 13 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
|
||||
, <&arduino_header 11 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
|
||||
;
|
||||
|
||||
};
|
||||
};
|
||||
|
||||
kscan_direct: kscan_direct {
|
||||
compatible = "zmk,kscan-gpio-direct";
|
||||
status = "disabled";
|
||||
kscan_direct: kscan_direct {
|
||||
compatible = "zmk,kscan-gpio-direct";
|
||||
status = "disabled";
|
||||
|
||||
input-gpios
|
||||
= <&arduino_header 10 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>
|
||||
, <&arduino_header 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>
|
||||
, <&arduino_header 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>
|
||||
, <&arduino_header 11 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>
|
||||
;
|
||||
input-gpios
|
||||
= <&arduino_header 10 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>
|
||||
, <&arduino_header 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>
|
||||
, <&arduino_header 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>
|
||||
, <&arduino_header 11 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>
|
||||
;
|
||||
|
||||
};
|
||||
};
|
||||
|
||||
kscan_sp3t_toggle: kscan_sp3t_toggle {
|
||||
compatible = "zmk,kscan-gpio-direct";
|
||||
toggle-mode;
|
||||
kscan_sp3t_toggle: kscan_sp3t_toggle {
|
||||
compatible = "zmk,kscan-gpio-direct";
|
||||
toggle-mode;
|
||||
|
||||
input-gpios
|
||||
= <&arduino_header 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>
|
||||
, <&arduino_header 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>
|
||||
, <&arduino_header 2 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>
|
||||
;
|
||||
};
|
||||
input-gpios
|
||||
= <&arduino_header 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>
|
||||
, <&arduino_header 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>
|
||||
, <&arduino_header 2 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>
|
||||
;
|
||||
};
|
||||
|
||||
encoder: encoder {
|
||||
label = "ENCODER";
|
||||
resolution = <4>;
|
||||
compatible = "alps,ec11";
|
||||
a-gpios = <&arduino_header 14 GPIO_PULL_UP>;
|
||||
b-gpios = <&arduino_header 15 GPIO_PULL_UP>;
|
||||
};
|
||||
encoder: encoder {
|
||||
label = "ENCODER";
|
||||
resolution = <4>;
|
||||
compatible = "alps,ec11";
|
||||
a-gpios = <&arduino_header 14 GPIO_PULL_UP>;
|
||||
b-gpios = <&arduino_header 15 GPIO_PULL_UP>;
|
||||
};
|
||||
|
||||
sensors {
|
||||
compatible = "zmk,keymap-sensors";
|
||||
sensors = <&encoder>;
|
||||
};
|
||||
sensors {
|
||||
compatible = "zmk,keymap-sensors";
|
||||
sensors = <&encoder>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
Reference in New Issue
Block a user