refactor: Remove unimportant labels

Removed "label" properties which no longer have any function.

Labels are still used as layer names and as identifiers for sending
behaviors between sides of a split keyboard, so those have been left
alone for now.

app/boards/arm/bt60/bt60.dtsi

@@ -32,7 +32,6 @@
 
     left_encoder: encoder_left {
         compatible = "alps,ec11";
-        label = "LEFT_ENCODER";
         a-gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>;
         b-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>;
         steps = <80>;
@@ -44,13 +43,11 @@
         compatible = "gpio-leds";
         blue_led: led_0 {
             gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-            label = "Blue LED";
         };
     };
 
     vbatt: vbatt {
         compatible = "zmk,battery-voltage-divider";
-        label = "BATTERY";
         io-channels = <&adc 2>;
         output-ohms = <2000000>;
         full-ohms = <(2000000 + 806000)>;
@@ -89,7 +86,6 @@
     status = "okay";
     cdc_acm_uart: cdc_acm_uart {
         compatible = "zephyr,cdc-acm-uart";
-        label = "CDC_ACM_0";
     };
 };
 
@@ -105,11 +101,9 @@
         #size-cells = <1>;
 
         sd_partition: partition@0 {
-            label = "softdevice";
             reg = <0x00000000 0x00026000>;
         };
         code_partition: partition@26000 {
-            label = "code_partition";
             reg = <0x00026000 0x000c6000>;
         };
 
@@ -123,12 +117,10 @@
          * if enabled.
          */
         storage_partition: partition@ec000 {
-            label = "storage";
             reg = <0x000ec000 0x00008000>;
         };
 
         boot_partition: partition@f4000 {
-            label = "adafruit_boot";
             reg = <0x000f4000 0x0000c000>;
         };
     };

app/boards/arm/bt60/bt60_v1.dts

@@ -81,7 +81,6 @@
 
     kscan0: kscan_0 {
         compatible = "zmk,kscan-gpio-matrix";
-        label = "KSCAN";
         diode-direction = "col2row";
 
         col-gpios

app/boards/arm/bt60/bt60_v1_hs.dts

@@ -30,7 +30,6 @@
 
     kscan0: kscan_0 {
         compatible = "zmk,kscan-gpio-matrix";
-        label = "KSCAN";
         diode-direction = "col2row";
 
         col-gpios