forked from kofal.net/zmk
6690d535e6
refactor(core): Adjust our approach for upstream Zephyr boards Move to using proper HWMv2 board extensions https://docs.zephyrproject.org/4.1.0/hardware/porting/board_porting.html#board-extensions for extending upstream Zephyr boards for use with ZMK. With this change, using upstream Zephyr board IDs directly, e.g. `seeeduino_xiao` will be stock versions as found upstream. To use a board variant that is tuned for ZMK use, use the `zmk` variant, e.g. `seeeduino_xiao//zmk` which is shorthand for `seeeduino_xiao/samd21g18a/zmk`. refactor(boards): Move to ZMK specific variants for the nRFMicro board For consistency, adjust the nRFMicro board definition to offer a "vanilla" Zephyr board, and then ZMK variants, e.g. `nrfmicro/nrf52840/zmk`. refactor(boards): Move to ZMK specific variant for the bluemicro840 board For consistency, adjust the bluemicro840 board definition to offer a "vanilla" Zephyr board, and then ZMK variant, e.g. `bluemicro840//zmk`. refactor(boards): Make tofu65 to ZMK variant by default Make the standard Tofu65 board ID be `tofu65/rp2040/zmk` or `tofu65//zmk` by shorthand. refactor(boards): Move BDN9 to ZMK variant by default Make the standard BDN9 board ID be `bdn9/stm32f072xb/zmk` or `bdn9//zmk` by shorthand. refactor(boards): Move Puchi BLE to ZMK variant by default Make the standard Puchi BLE board ID be `puchi_ble/nrf52840/zmk` or `puchi_ble//zmk` by shorthand. refactor(boards): Move Adv360 Pro to ZMK variant by default Make the standard Adv360 Pro board ID be `adv360pro_left/nrf52840/zmk` or `adv360pro_left//zmk` by shorthand and for right as well. refactor(boards): Move nRF52840 M2 to ZMK variant by default Make the standard nRF52840 M2 board ID be `nrf52840_m2/nrf52840/zmk` or `nrf52840_m2//zmk` by shorthand. refactor(boards): Move Pillbug to ZMK variant by default Make the standard Pillbug board ID be `pillbug/nrf52840/zmk` or `pillbug//zmk` by shorthand. refactor(boards): Move s40nc to ZMK variant by default Make the standard s40nc board ID be `s40nc/nrf52840/zmk` or `s40nc//zmk` by shorthand. refactor(boards): Move nice!60 to ZMK variant by default Make the standard nice!60 board ID be `nice60/nrf52840/zmk` or `nice60//zmk` by shorthand. refactor(boards): Move planck to ZMK variant by default Make the standard planck board ID be `planck/stm32f303xc/zmk` or `planck//zmk` by shorthand. refactor(boards): Move preonic to ZMK variant by default Make the standard preonic board ID be `preonic/stm32f303xc/zmk` or `preonic//zmk` by shorthand. refactor(boards): Move ferris to ZMK variant by default Make the standard ferris board ID be `ferris/stm32f072xb/zmk` or `ferris//zmk` by shorthand. refactor(boards): Move Proton-C to ZMK variant by default Make the standard Proton-C board ID be `proton_c/stm32f303xc/zmk` or `proton_c//zmk` by shorthand. refactor(boards): Move Corneish Zen to ZMK variant by default Make the standard Corneish Zen board ID be `corneish_zen_left/nrf52840/zmk` or `corneish_zen_left//zmk` by shorthand and for right as well. refactor(boards): Move nice!nano to ZMK variant by default Make the standard nice!nano board ID be `nice_nano/nrf52840/zmk` or `nice_nano//zmk` by shorthand. refactor(boards): Move mikoto to ZMK variant by default Make the standard mikoto board ID be `mikoto/nrf52840/zmk` or `mikoto//zmk` by shorthand. refactor(boards): Move Polarity Works boards to ZMK variants Make the standard Polarity Works board IDs be `zmk` variants. doc: Update docs/blog post to reference ZMK variants * Update Zephyr 4.1 blog post to mention ZMK variants * Add note to hardware support page about variants docs: Fix up shield board overlays for new board IDs Adjust our documentation to properly use the correct qualified board overlay file names that match our new board conventions.
157 lines
4.6 KiB
Plaintext
157 lines
4.6 KiB
Plaintext
/*
|
|
* Copyright (c) 2020 The ZMK Contributors
|
|
*
|
|
* SPDX-License-Identifier: MIT
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include <st/f3/stm32f303Xc.dtsi>
|
|
#include <st/f3/stm32f303c(b-c)tx-pinctrl.dtsi>
|
|
#include <dt-bindings/zmk/matrix_transform.h>
|
|
|
|
#include <layouts/common/ortho_4x12/1x2u.dtsi>
|
|
#include <layouts/common/ortho_4x12/2x2u.dtsi>
|
|
#include <layouts/common/ortho_4x12/all1u.dtsi>
|
|
|
|
|
|
/ {
|
|
model = "Plack PCD, rev6";
|
|
compatible = "planck,rev6", "st,stm32f303";
|
|
|
|
chosen {
|
|
zephyr,sram = &sram0;
|
|
zephyr,flash = &flash0;
|
|
zmk,kscan = &kscan0;
|
|
zmk,physical-layout = &layout_ortho_4x12_all1u;
|
|
};
|
|
|
|
kscan0: kscan {
|
|
compatible = "zmk,kscan-gpio-matrix";
|
|
diode-direction = "col2row";
|
|
row-gpios
|
|
= <&gpioa 10 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
|
|
, <&gpioa 9 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
|
|
, <&gpioa 8 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
|
|
, <&gpiob 15 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
|
|
, <&gpioc 13 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
|
|
, <&gpioc 14 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
|
|
, <&gpioc 15 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
|
|
, <&gpioa 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
|
|
;
|
|
col-gpios
|
|
= <&gpiob 11 GPIO_ACTIVE_HIGH>
|
|
, <&gpiob 10 GPIO_ACTIVE_HIGH>
|
|
, <&gpiob 2 GPIO_ACTIVE_HIGH>
|
|
, <&gpiob 1 GPIO_ACTIVE_HIGH>
|
|
, <&gpioa 7 GPIO_ACTIVE_HIGH>
|
|
, <&gpiob 0 GPIO_ACTIVE_HIGH>
|
|
;
|
|
};
|
|
|
|
encoder: encoder {
|
|
compatible = "alps,ec11";
|
|
a-gpios = <&gpiob 12 GPIO_PULL_UP>;
|
|
b-gpios = <&gpiob 13 GPIO_PULL_UP>;
|
|
steps = <80>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sensors: sensors {
|
|
compatible = "zmk,keymap-sensors";
|
|
sensors = <&encoder>;
|
|
triggers-per-rotation = <20>;
|
|
};
|
|
|
|
layout_grid_transform:
|
|
keymap_transform_0 {
|
|
compatible = "zmk,matrix-transform";
|
|
columns = <6>;
|
|
rows = <8>;
|
|
map = <
|
|
RC(0,0) RC(0,1) RC(0,2) RC(0,3) RC(0,4) RC(0,5) RC(4,0) RC(4,1) RC(4,2) RC(4,3) RC(4,4) RC(4,5)
|
|
RC(1,0) RC(1,1) RC(1,2) RC(1,3) RC(1,4) RC(1,5) RC(5,0) RC(5,1) RC(5,2) RC(5,3) RC(5,4) RC(5,5)
|
|
RC(2,0) RC(2,1) RC(2,2) RC(2,3) RC(2,4) RC(2,5) RC(6,0) RC(6,1) RC(6,2) RC(6,3) RC(6,4) RC(6,5)
|
|
RC(3,0) RC(3,1) RC(3,2) RC(7,3) RC(7,4) RC(7,5) RC(7,0) RC(7,1) RC(7,2) RC(3,3) RC(3,4) RC(3,5)
|
|
>;
|
|
};
|
|
layout_mit_transform:
|
|
keymap_transform_1 {
|
|
compatible = "zmk,matrix-transform";
|
|
columns = <6>;
|
|
rows = <8>;
|
|
map = <
|
|
RC(0,0) RC(0,1) RC(0,2) RC(0,3) RC(0,4) RC(0,5) RC(4,0) RC(4,1) RC(4,2) RC(4,3) RC(4,4) RC(4,5)
|
|
RC(1,0) RC(1,1) RC(1,2) RC(1,3) RC(1,4) RC(1,5) RC(5,0) RC(5,1) RC(5,2) RC(5,3) RC(5,4) RC(5,5)
|
|
RC(2,0) RC(2,1) RC(2,2) RC(2,3) RC(2,4) RC(2,5) RC(6,0) RC(6,1) RC(6,2) RC(6,3) RC(6,4) RC(6,5)
|
|
RC(3,0) RC(3,1) RC(3,2) RC(7,3) RC(7,4) RC(7,0) RC(7,1) RC(7,2) RC(3,3) RC(3,4) RC(3,5)
|
|
>;
|
|
};
|
|
layout_2x2u_transform:
|
|
keymap_transform_2 {
|
|
compatible = "zmk,matrix-transform";
|
|
columns = <6>;
|
|
rows = <8>;
|
|
map = <
|
|
RC(0,0) RC(0,1) RC(0,2) RC(0,3) RC(0,4) RC(0,5) RC(4,0) RC(4,1) RC(4,2) RC(4,3) RC(4,4) RC(4,5)
|
|
RC(1,0) RC(1,1) RC(1,2) RC(1,3) RC(1,4) RC(1,5) RC(5,0) RC(5,1) RC(5,2) RC(5,3) RC(5,4) RC(5,5)
|
|
RC(2,0) RC(2,1) RC(2,2) RC(2,3) RC(2,4) RC(2,5) RC(6,0) RC(6,1) RC(6,2) RC(6,3) RC(6,4) RC(6,5)
|
|
RC(3,0) RC(3,1) RC(3,2) RC(7,3) RC(7,5) RC(7,1) RC(7,2) RC(3,3) RC(3,4) RC(3,5)
|
|
>;
|
|
};
|
|
};
|
|
|
|
zephyr_udc0: &usb {
|
|
pinctrl-0 = <&usb_dm_pa11 &usb_dp_pa12>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
&clk_hse {
|
|
status = "okay";
|
|
clock-frequency = <DT_FREQ_M(8)>;
|
|
};
|
|
|
|
&pll {
|
|
prediv = <1>;
|
|
mul = <9>;
|
|
clocks = <&clk_hse>;
|
|
status = "okay";
|
|
};
|
|
|
|
&rcc {
|
|
clocks = <&pll>;
|
|
clock-frequency = <DT_FREQ_M(72)>;
|
|
ahb-prescaler = <1>;
|
|
apb1-prescaler = <2>;
|
|
apb2-prescaler = <1>;
|
|
};
|
|
|
|
&flash0 {
|
|
/*
|
|
* For more information, see:
|
|
* http://docs.zephyrproject.org/latest/guides/dts/index.html#flash-partitions
|
|
*/
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
/* Set 6Kb of storage at the end of the 256Kb of flash */
|
|
storage_partition: partition@3e800 {
|
|
reg = <0x0003e800 0x00001800>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&layout_ortho_4x12_all1u {
|
|
transform = <&layout_grid_transform>;
|
|
};
|
|
|
|
&layout_ortho_4x12_1x2u {
|
|
transform = <&layout_mit_transform>;
|
|
};
|
|
|
|
&layout_ortho_4x12_2x2u {
|
|
transform = <&layout_2x2u_transform>;
|
|
};
|