forked from kofal.net/zmk
6690d535e6
refactor(core): Adjust our approach for upstream Zephyr boards Move to using proper HWMv2 board extensions https://docs.zephyrproject.org/4.1.0/hardware/porting/board_porting.html#board-extensions for extending upstream Zephyr boards for use with ZMK. With this change, using upstream Zephyr board IDs directly, e.g. `seeeduino_xiao` will be stock versions as found upstream. To use a board variant that is tuned for ZMK use, use the `zmk` variant, e.g. `seeeduino_xiao//zmk` which is shorthand for `seeeduino_xiao/samd21g18a/zmk`. refactor(boards): Move to ZMK specific variants for the nRFMicro board For consistency, adjust the nRFMicro board definition to offer a "vanilla" Zephyr board, and then ZMK variants, e.g. `nrfmicro/nrf52840/zmk`. refactor(boards): Move to ZMK specific variant for the bluemicro840 board For consistency, adjust the bluemicro840 board definition to offer a "vanilla" Zephyr board, and then ZMK variant, e.g. `bluemicro840//zmk`. refactor(boards): Make tofu65 to ZMK variant by default Make the standard Tofu65 board ID be `tofu65/rp2040/zmk` or `tofu65//zmk` by shorthand. refactor(boards): Move BDN9 to ZMK variant by default Make the standard BDN9 board ID be `bdn9/stm32f072xb/zmk` or `bdn9//zmk` by shorthand. refactor(boards): Move Puchi BLE to ZMK variant by default Make the standard Puchi BLE board ID be `puchi_ble/nrf52840/zmk` or `puchi_ble//zmk` by shorthand. refactor(boards): Move Adv360 Pro to ZMK variant by default Make the standard Adv360 Pro board ID be `adv360pro_left/nrf52840/zmk` or `adv360pro_left//zmk` by shorthand and for right as well. refactor(boards): Move nRF52840 M2 to ZMK variant by default Make the standard nRF52840 M2 board ID be `nrf52840_m2/nrf52840/zmk` or `nrf52840_m2//zmk` by shorthand. refactor(boards): Move Pillbug to ZMK variant by default Make the standard Pillbug board ID be `pillbug/nrf52840/zmk` or `pillbug//zmk` by shorthand. refactor(boards): Move s40nc to ZMK variant by default Make the standard s40nc board ID be `s40nc/nrf52840/zmk` or `s40nc//zmk` by shorthand. refactor(boards): Move nice!60 to ZMK variant by default Make the standard nice!60 board ID be `nice60/nrf52840/zmk` or `nice60//zmk` by shorthand. refactor(boards): Move planck to ZMK variant by default Make the standard planck board ID be `planck/stm32f303xc/zmk` or `planck//zmk` by shorthand. refactor(boards): Move preonic to ZMK variant by default Make the standard preonic board ID be `preonic/stm32f303xc/zmk` or `preonic//zmk` by shorthand. refactor(boards): Move ferris to ZMK variant by default Make the standard ferris board ID be `ferris/stm32f072xb/zmk` or `ferris//zmk` by shorthand. refactor(boards): Move Proton-C to ZMK variant by default Make the standard Proton-C board ID be `proton_c/stm32f303xc/zmk` or `proton_c//zmk` by shorthand. refactor(boards): Move Corneish Zen to ZMK variant by default Make the standard Corneish Zen board ID be `corneish_zen_left/nrf52840/zmk` or `corneish_zen_left//zmk` by shorthand and for right as well. refactor(boards): Move nice!nano to ZMK variant by default Make the standard nice!nano board ID be `nice_nano/nrf52840/zmk` or `nice_nano//zmk` by shorthand. refactor(boards): Move mikoto to ZMK variant by default Make the standard mikoto board ID be `mikoto/nrf52840/zmk` or `mikoto//zmk` by shorthand. refactor(boards): Move Polarity Works boards to ZMK variants Make the standard Polarity Works board IDs be `zmk` variants. doc: Update docs/blog post to reference ZMK variants * Update Zephyr 4.1 blog post to mention ZMK variants * Add note to hardware support page about variants docs: Fix up shield board overlays for new board IDs Adjust our documentation to properly use the correct qualified board overlay file names that match our new board conventions.
58 lines
2.0 KiB
Plaintext
58 lines
2.0 KiB
Plaintext
/*
|
|
* Copyright (c) 2020 Derek Schmell
|
|
*
|
|
* SPDX-License-Identifier: MIT
|
|
*/
|
|
|
|
/ {
|
|
pro_micro: connector {
|
|
compatible = "arduino-pro-micro";
|
|
#gpio-cells = <2>;
|
|
gpio-map-mask = <0xffffffff 0xffffffc0>;
|
|
gpio-map-pass-thru = <0 0x3f>;
|
|
gpio-map
|
|
= <0 0 &gpio0 8 0> /* D0 D2 */
|
|
, <1 0 &gpio0 6 0> /* D1 D3*/
|
|
, <2 0 &gpio0 15 0> /* D2 D1*/
|
|
, <3 0 &gpio0 17 0> /* D3 D0*/
|
|
, <4 0 &gpio0 20 0> /* D4/A6 D4*/
|
|
, <5 0 &gpio0 13 0> /* D5 C6*/
|
|
, <6 0 &gpio0 24 0> /* D6/A7 D7*/
|
|
, <7 0 &gpio0 9 0> /* D7 E6*/
|
|
, <8 0 &gpio0 10 0> /* D8/A8 B4*/
|
|
, <9 0 &gpio1 6 0> /* D9/A9 B5*/
|
|
, <10 0 &gpio1 11 0> /* D10/A10 B6*/
|
|
, <16 0 &gpio0 28 0> /* D16 B2*/
|
|
, <14 0 &gpio0 3 0> /* D14 B3*/
|
|
, <15 0 &gpio1 13 0> /* D15 B1*/
|
|
, <18 0 &gpio0 2 0> /* D18/A0 F7*/
|
|
, <19 0 &gpio0 29 0> /* D19/A1 F6*/
|
|
, <20 0 &gpio0 26 0> /* D20/A2 F5*/
|
|
, <21 0 &gpio0 30 0> /* D21/A3 F4*/
|
|
;
|
|
};
|
|
|
|
pro_micro_a: connector_a {
|
|
compatible = "arduino-pro-micro";
|
|
#gpio-cells = <2>;
|
|
gpio-map-mask = <0xffffffff 0xffffffc0>;
|
|
gpio-map-pass-thru = <0 0x3f>;
|
|
gpio-map
|
|
= <0 0 &gpio0 2 0> /* D18/A0 F7*/
|
|
, <1 0 &gpio0 29 0> /* D19/A1 F6*/
|
|
, <2 0 &gpio0 26 0> /* D20/A2 F5*/
|
|
, <3 0 &gpio0 30 0> /* D21/A3 F4*/
|
|
, <6 0 &gpio0 20 0> /* D4/A6 D4*/
|
|
, <7 0 &gpio0 24 0> /* D6/A7 D7*/
|
|
, <8 0 &gpio0 10 0> /* D8/A8 B4*/
|
|
, <9 0 &gpio1 6 0> /* D9/A9 B5*/
|
|
, <10 0 &gpio1 11 0> /* D10/A10 B6*/
|
|
;
|
|
};
|
|
};
|
|
|
|
pro_micro_d: &pro_micro {};
|
|
pro_micro_i2c: &i2c0 {};
|
|
pro_micro_spi: &spi1 {};
|
|
pro_micro_serial: &uart0 {};
|