feat(combos): initial implementation

closes #45

docs/docs/behaviors/combos.md

@@ -0,0 +1,52 @@
+---
+title: Combo Behavior
+sidebar_label: Combos
+---
+
+## Summary
+
+Combo keys are a way to combine multiple keypresses to output a different key. For example, you can hit the Q and W keys on your keyboard to output escape.
+
+### Configuration
+
+Combos are specified like this:
+
+```
+/ {
+	combos {
+		compatible = "zmk,combos";
+		combo_esc {
+			timeout-ms = <50>;
+			key-positions = <0 1>;
+			bindings = <&kp ESC>;
+		};
+	};
+};
+```
+
+- The name of the combo doesn't really matter, but convention is to start the node name with `combo_`.
+- The `compatible` property should always be `"zmk,combos"` for combos.
+- `timeout-ms` is the number of milliseconds that all keys of the combo must be pressed.
+- `key-positions` is an array of key positions. See the info section below about how to figure out the positions on your board.
+- `bindings` is the behavior that is activated when the behavior is pressed.
+- (advanced) you can specify `slow-release` if you want the combo binding to be released when all key-positions are released. The default is to release the combo as soon as any of the keys in the combo is released.
+
+:::info
+
+Key positions are numbered like the keys in your keymap, starting at 0. So, if the first key in your keymap is `Q`, this key is in position `0`. The next key (possibly `W`) will have position 1, etcetera.
+
+:::
+
+### Advanced usage
+
+- Partially overlapping combos like `0 1` and `0 2` are supported.
+- Fully overlapping combos like `0 1` and `0 1 2` are supported.
+- You are not limited to `&kp` bindings. You can use all ZMK behaviors there, like `&mo`, `&bt`, `&mt`, `&lt` etc.
+
+### Advanced configuration
+
+There are three global combo parameters which are set through KConfig. You can set them in the `<boardname>.conf` file in the same directory as your keymap file.
+
+- `CONFIG_ZMK_COMBO_MAX_PRESSED_COMBOS` is the number of combos that can be active at the same time. Default 4.
+- `CONFIG_ZMK_COMBO_MAX_COMBOS_PER_KEY` is the maximum number of combos that can be active on a key position. Defaults to 5. (So you can have 5 separate combos that use position `3` for example)
+- `CONFIG_ZMK_COMBO_MAX_KEYS_PER_COMBO` is the maximum number of keys that need to be pressed to activate a combo. Default 4. If you want a combo that triggers when pressing 5 keys, you'd set this to 5 for example.

docs/docs/intro.md

@@ -26,7 +26,7 @@ ZMK is currently missing some features found in other popular firmware. This tab
 | [Display Support](features/displays)[^2]                                                                                  | 🚧  |    🚧     | ✅  |
 | [RGB Underglow](features/underglow)                                                                                       | ✅  |    ✅     | ✅  |
 | One Shot Keys                                                                                                             | ✅  |    ✅     | ✅  |
-| [Combo Keys](https://github.com/zmkfirmware/zmk/pull/504)                                                                 | 🚧  |           | ✅  |
+| [Combo Keys](behaviors/combos)                                                                                            | ✅  |           | ✅  |
 | Macros                                                                                                                    | 🚧  |    ✅     | ✅  |
 | Mouse Keys                                                                                                                | 💡  |    ✅     | ✅  |
 | Low Active Power Usage                                                                                                    | ✅  |           |     |

docs/sidebars.js

@@ -20,6 +20,7 @@ module.exports = {
       "behaviors/misc",
       "behaviors/hold-tap",
       "behaviors/mod-tap",
+      "behaviors/combos",
       "behaviors/reset",
       "behaviors/bluetooth",
       "behaviors/outputs",