mirror of
https://github.com/zmkfirmware/zmk.git
synced 2026-03-19 20:45:18 -05:00
Compare commits
19 Commits
dependabot
...
docs/prede
| Author | SHA1 | Date | |
|---|---|---|---|
|
bc577ffbbd | ||
|
|
a05f5699dd | ||
|
ada1542940 | ||
|
|
6690d535e6 | ||
|
6e7e0de2b6 | ||
|
ac7f75b859 | ||
|
|
354cff9c36 | ||
|
ab46f48dde | ||
|
|
24487bd974 | ||
|
88db5f34fe | ||
|
9fc10ddc22 | ||
|
19582174f3 | ||
|
70ab6b243a | ||
|
|
f85ec7e7a2 | ||
|
|
43b09e0fae | ||
|
abce9deab7 | ||
|
|
36dbf46764 | ||
|
|
cb786cd7d6 | ||
|
|
76bf2e5774 |
3
.github/workflows/build.yml
vendored
3
.github/workflows/build.yml
vendored
@@ -61,7 +61,7 @@ jobs:
|
||||
with:
|
||||
node-version: "14.x"
|
||||
- name: Install @actions/artifact
|
||||
run: npm install @actions/artifact
|
||||
run: npm install @actions/artifact@5.0.3
|
||||
- name: Build
|
||||
uses: actions/github-script@v7
|
||||
id: boards-list
|
||||
@@ -277,6 +277,7 @@ jobs:
|
||||
);
|
||||
} else {
|
||||
console.error("Board without keys or interconnect");
|
||||
return [];
|
||||
}
|
||||
break;
|
||||
case "shield":
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
file_format: "1"
|
||||
id: adafruit_kb2040
|
||||
id: adafruit_kb2040//zmk
|
||||
name: Adafruit KB2040
|
||||
type: board
|
||||
arch: arm
|
||||
|
||||
@@ -4,6 +4,7 @@
|
||||
* SPDX-License-Identifier: MIT
|
||||
*/
|
||||
|
||||
#include <../boards/adafruit/kb2040/adafruit_kb2040.dts>
|
||||
#include <arm/raspberrypi/rp2040-boot-mode-retention.dtsi>
|
||||
|
||||
&pro_micro_serial { status = "disabled"; };
|
||||
23
app/boards/adafruit/kb2040/adafruit_kb2040_zmk_defconfig
Normal file
23
app/boards/adafruit/kb2040/adafruit_kb2040_zmk_defconfig
Normal file
@@ -0,0 +1,23 @@
|
||||
# SPDX-License-Identifier: MIT
|
||||
|
||||
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=125000000
|
||||
|
||||
# Enable reset by default
|
||||
CONFIG_RESET=y
|
||||
|
||||
# Enable clock control by default
|
||||
CONFIG_CLOCK_CONTROL=y
|
||||
|
||||
# Code partition needed to target the correct flash range
|
||||
CONFIG_USE_DT_CODE_PARTITION=y
|
||||
|
||||
# Output UF2 by default, native bootloader supports it.
|
||||
CONFIG_BUILD_OUTPUT_UF2=y
|
||||
|
||||
# USB HID
|
||||
CONFIG_ZMK_USB=y
|
||||
|
||||
# Bootloader Support
|
||||
CONFIG_RETAINED_MEM=y
|
||||
CONFIG_RETENTION=y
|
||||
CONFIG_RETENTION_BOOT_MODE=y
|
||||
5
app/boards/adafruit/kb2040/board.yml
Normal file
5
app/boards/adafruit/kb2040/board.yml
Normal file
@@ -0,0 +1,5 @@
|
||||
board:
|
||||
extend: adafruit_kb2040
|
||||
variants:
|
||||
- name: zmk
|
||||
qualifier: rp2040
|
||||
@@ -1,5 +1,5 @@
|
||||
file_format: "1"
|
||||
id: adafruit_qt_py_rp2040
|
||||
id: adafruit_qt_py_rp2040//zmk
|
||||
name: Adafruit QT Py RP2040
|
||||
type: board
|
||||
arch: arm
|
||||
|
||||
@@ -4,6 +4,7 @@
|
||||
* SPDX-License-Identifier: MIT
|
||||
*/
|
||||
|
||||
#include <../boards/adafruit/qt_py_rp2040/adafruit_qt_py_rp2040.dts>
|
||||
#include <arm/raspberrypi/rp2040-boot-mode-retention.dtsi>
|
||||
|
||||
&xiao_serial { status = "disabled"; };
|
||||
@@ -0,0 +1,23 @@
|
||||
# SPDX-License-Identifier: MIT
|
||||
|
||||
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=125000000
|
||||
|
||||
# Enable reset by default
|
||||
CONFIG_RESET=y
|
||||
|
||||
# Enable clock control by default
|
||||
CONFIG_CLOCK_CONTROL=y
|
||||
|
||||
# Code partition needed to target the correct flash range
|
||||
CONFIG_USE_DT_CODE_PARTITION=y
|
||||
|
||||
# Output UF2 by default, native bootloader supports it.
|
||||
CONFIG_BUILD_OUTPUT_UF2=y
|
||||
|
||||
# USB HID
|
||||
CONFIG_ZMK_USB=y
|
||||
|
||||
# Bootloader Support
|
||||
CONFIG_RETAINED_MEM=y
|
||||
CONFIG_RETENTION=y
|
||||
CONFIG_RETENTION_BOOT_MODE=y
|
||||
5
app/boards/adafruit/qt_py_rp2040/board.yml
Normal file
5
app/boards/adafruit/qt_py_rp2040/board.yml
Normal file
@@ -0,0 +1,5 @@
|
||||
board:
|
||||
extend: adafruit_qt_py_rp2040
|
||||
variants:
|
||||
- name: zmk
|
||||
qualifier: rp2040
|
||||
@@ -1,9 +0,0 @@
|
||||
file_format: "1"
|
||||
id: boardsource_blok
|
||||
name: BoardSource blok
|
||||
type: board
|
||||
arch: arm
|
||||
outputs:
|
||||
- usb
|
||||
url: https://peg.software/docs/blok
|
||||
exposes: [pro_micro]
|
||||
5
app/boards/boardsource/blok/board.yml
Normal file
5
app/boards/boardsource/blok/board.yml
Normal file
@@ -0,0 +1,5 @@
|
||||
board:
|
||||
extend: boardsource_blok
|
||||
variants:
|
||||
- name: zmk
|
||||
qualifier: rp2040
|
||||
9
app/boards/boardsource/blok/boardsource_blok.zmk.yml
Normal file
9
app/boards/boardsource/blok/boardsource_blok.zmk.yml
Normal file
@@ -0,0 +1,9 @@
|
||||
file_format: "1"
|
||||
id: boardsource_blok//zmk
|
||||
name: Boardsource Blok
|
||||
type: board
|
||||
arch: arm
|
||||
outputs:
|
||||
- usb
|
||||
url: https://boardsource.xyz/products/blok-rp2040-keyboard-controller
|
||||
exposes: [pro_micro]
|
||||
23
app/boards/boardsource/blok/boardsource_blok_zmk.dts
Normal file
23
app/boards/boardsource/blok/boardsource_blok_zmk.dts
Normal file
@@ -0,0 +1,23 @@
|
||||
/*
|
||||
* Copyright (c) 2026 The ZMK Contributors
|
||||
*
|
||||
* SPDX-License-Identifier: MIT
|
||||
*/
|
||||
|
||||
#include <../boards/boardsource/blok/boardsource_blok.dts>
|
||||
#include <arm/raspberrypi/rp2040-boot-mode-retention.dtsi>
|
||||
|
||||
&pro_micro_serial { status = "disabled"; };
|
||||
|
||||
&code_partition {
|
||||
reg = <0x100 (DT_SIZE_M(16) - 0x100 - DT_SIZE_K(512))>;
|
||||
};
|
||||
|
||||
&flash0 {
|
||||
partitions {
|
||||
storage_partition: partition@f80000 {
|
||||
reg = <0xf80000 DT_SIZE_K(512)>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
30
app/boards/boardsource/blok/boardsource_blok_zmk_defconfig
Normal file
30
app/boards/boardsource/blok/boardsource_blok_zmk_defconfig
Normal file
@@ -0,0 +1,30 @@
|
||||
# SPDX-License-Identifier: MIT
|
||||
|
||||
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=125000000
|
||||
|
||||
CONFIG_RESET=y
|
||||
|
||||
# Enable clock control by default
|
||||
CONFIG_CLOCK_CONTROL=y
|
||||
|
||||
# Code partition needed to target the correct flash range
|
||||
CONFIG_USE_DT_CODE_PARTITION=y
|
||||
|
||||
# Output UF2 by default, native bootloader supports it.
|
||||
CONFIG_BUILD_OUTPUT_UF2=y
|
||||
|
||||
# USB HID
|
||||
CONFIG_ZMK_USB=y
|
||||
|
||||
# Settings Support
|
||||
CONFIG_MPU_ALLOW_FLASH_WRITE=y
|
||||
CONFIG_NVS=y
|
||||
CONFIG_SETTINGS_NVS=y
|
||||
CONFIG_FLASH=y
|
||||
CONFIG_FLASH_PAGE_LAYOUT=y
|
||||
CONFIG_FLASH_MAP=y
|
||||
|
||||
# Bootloader Support
|
||||
CONFIG_RETAINED_MEM=y
|
||||
CONFIG_RETENTION=y
|
||||
CONFIG_RETENTION_BOOT_MODE=y
|
||||
@@ -1,8 +0,0 @@
|
||||
CONFIG_CONSOLE=n
|
||||
CONFIG_SERIAL=n
|
||||
CONFIG_UART_CONSOLE=n
|
||||
CONFIG_ZMK_USB=y
|
||||
|
||||
CONFIG_RETAINED_MEM=y
|
||||
CONFIG_RETENTION=y
|
||||
CONFIG_RETENTION_BOOT_MODE=y
|
||||
@@ -1,9 +0,0 @@
|
||||
/*
|
||||
* Copyright (c) 2023 The ZMK Contributors
|
||||
*
|
||||
* SPDX-License-Identifier: MIT
|
||||
*/
|
||||
|
||||
#include <arm/raspberrypi/rp2040-boot-mode-retention.dtsi>
|
||||
|
||||
&pro_micro_serial { status = "disabled"; };
|
||||
@@ -1,8 +0,0 @@
|
||||
CONFIG_CONSOLE=n
|
||||
CONFIG_SERIAL=n
|
||||
CONFIG_UART_CONSOLE=n
|
||||
CONFIG_ZMK_USB=y
|
||||
|
||||
CONFIG_RETAINED_MEM=y
|
||||
CONFIG_RETENTION=y
|
||||
CONFIG_RETENTION_BOOT_MODE=y
|
||||
@@ -1,6 +0,0 @@
|
||||
CONFIG_CONSOLE=n
|
||||
CONFIG_SERIAL=n
|
||||
CONFIG_UART_CONSOLE=n
|
||||
CONFIG_UART_INTERRUPT_DRIVEN=n
|
||||
CONFIG_ZMK_USB=y
|
||||
CONFIG_ZMK_KSCAN_MATRIX_POLLING=y
|
||||
@@ -1,6 +0,0 @@
|
||||
CONFIG_CONSOLE=n
|
||||
CONFIG_SERIAL=n
|
||||
CONFIG_UART_CONSOLE=n
|
||||
CONFIG_UART_INTERRUPT_DRIVEN=n
|
||||
CONFIG_ZMK_USB=y
|
||||
CONFIG_ZMK_KSCAN_MATRIX_POLLING=y
|
||||
@@ -1,6 +0,0 @@
|
||||
CONFIG_CONSOLE=n
|
||||
CONFIG_SERIAL=n
|
||||
CONFIG_UART_CONSOLE=n
|
||||
CONFIG_UART_INTERRUPT_DRIVEN=n
|
||||
CONFIG_ZMK_USB=y
|
||||
CONFIG_ZMK_KSCAN_MATRIX_POLLING=y
|
||||
@@ -1,8 +0,0 @@
|
||||
CONFIG_CONSOLE=n
|
||||
CONFIG_SERIAL=n
|
||||
CONFIG_UART_CONSOLE=n
|
||||
CONFIG_ZMK_USB=y
|
||||
|
||||
CONFIG_RETAINED_MEM=y
|
||||
CONFIG_RETENTION=y
|
||||
CONFIG_RETENTION_BOOT_MODE=y
|
||||
@@ -1,32 +0,0 @@
|
||||
|
||||
#include <dt-bindings/zmk/keys.h>
|
||||
#include <dt-bindings/zmk/kscan_mock.h>
|
||||
|
||||
/ {
|
||||
chosen {
|
||||
zephyr,console = &uart0;
|
||||
zmk,kscan = &kscan;
|
||||
};
|
||||
|
||||
kscan: native_posix_64_kscan_mock {
|
||||
compatible = "zmk,kscan-mock";
|
||||
|
||||
rows = <2>;
|
||||
columns = <2>;
|
||||
exit-after;
|
||||
};
|
||||
|
||||
uart0: uart {
|
||||
status = "okay";
|
||||
compatible = "zephyr,native-posix-uart";
|
||||
/* Dummy current-speed entry to comply with serial
|
||||
* DTS binding
|
||||
*/
|
||||
current-speed = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&sdl_dc {
|
||||
width = <128>;
|
||||
height = <32>;
|
||||
};
|
||||
@@ -1,12 +0,0 @@
|
||||
# Copyright (c) 2025 The ZMK Contributors
|
||||
# SPDX-License-Identifier: MIT
|
||||
|
||||
CONFIG_ZMK_BLE=y
|
||||
CONFIG_ZMK_USB=y
|
||||
|
||||
CONFIG_MPU_ALLOW_FLASH_WRITE=y
|
||||
CONFIG_NVS=y
|
||||
CONFIG_SETTINGS_NVS=y
|
||||
CONFIG_FLASH=y
|
||||
CONFIG_FLASH_PAGE_LAYOUT=y
|
||||
CONFIG_FLASH_MAP=y
|
||||
@@ -1,4 +0,0 @@
|
||||
CONFIG_ZMK_BLE=y
|
||||
CONFIG_LOG=y
|
||||
CONFIG_LOG_BACKEND_SHOW_COLOR=n
|
||||
CONFIG_ZMK_LOG_LEVEL_DBG=y
|
||||
@@ -1,6 +0,0 @@
|
||||
CONFIG_ZMK_DISPLAY=y
|
||||
CONFIG_LV_FONT_UNSCII_8=n
|
||||
CONFIG_ZMK_USB=y
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_DW=y
|
||||
CONFIG_LV_Z_VDB_SIZE=50
|
||||
@@ -1,7 +0,0 @@
|
||||
/*
|
||||
* Copyright (c) 2023 The ZMK Contributors
|
||||
*
|
||||
* SPDX-License-Identifier: MIT
|
||||
*/
|
||||
|
||||
&xiao_serial { status = "disabled"; };
|
||||
@@ -1,16 +0,0 @@
|
||||
CONFIG_CONSOLE=n
|
||||
CONFIG_SERIAL=n
|
||||
CONFIG_UART_CONSOLE=n
|
||||
CONFIG_UART_INTERRUPT_DRIVEN=n
|
||||
CONFIG_ZMK_USB=y
|
||||
|
||||
CONFIG_MPU_ALLOW_FLASH_WRITE=y
|
||||
CONFIG_NVS=y
|
||||
CONFIG_SETTINGS_NVS=y
|
||||
CONFIG_FLASH=y
|
||||
CONFIG_FLASH_PAGE_LAYOUT=y
|
||||
CONFIG_FLASH_MAP=y
|
||||
|
||||
CONFIG_RETAINED_MEM=y
|
||||
CONFIG_RETENTION=y
|
||||
CONFIG_RETENTION_BOOT_MODE=y
|
||||
@@ -1,5 +0,0 @@
|
||||
CONFIG_CONSOLE=n
|
||||
CONFIG_SERIAL=n
|
||||
CONFIG_UART_CONSOLE=n
|
||||
CONFIG_UART_INTERRUPT_DRIVEN=n
|
||||
CONFIG_ZMK_USB=y
|
||||
@@ -1,15 +0,0 @@
|
||||
CONFIG_CONSOLE=n
|
||||
CONFIG_SERIAL=n
|
||||
CONFIG_UART_CONSOLE=n
|
||||
CONFIG_ZMK_USB=y
|
||||
|
||||
CONFIG_MPU_ALLOW_FLASH_WRITE=y
|
||||
CONFIG_NVS=y
|
||||
CONFIG_SETTINGS_NVS=y
|
||||
CONFIG_FLASH=y
|
||||
CONFIG_FLASH_PAGE_LAYOUT=y
|
||||
CONFIG_FLASH_MAP=y
|
||||
|
||||
CONFIG_RETAINED_MEM=y
|
||||
CONFIG_RETENTION=y
|
||||
CONFIG_RETENTION_BOOT_MODE=y
|
||||
@@ -1,15 +0,0 @@
|
||||
CONFIG_CONSOLE=n
|
||||
CONFIG_SERIAL=n
|
||||
CONFIG_UART_CONSOLE=n
|
||||
CONFIG_ZMK_USB=y
|
||||
|
||||
CONFIG_MPU_ALLOW_FLASH_WRITE=y
|
||||
CONFIG_NVS=y
|
||||
CONFIG_SETTINGS_NVS=y
|
||||
CONFIG_FLASH=y
|
||||
CONFIG_FLASH_PAGE_LAYOUT=y
|
||||
CONFIG_FLASH_MAP=y
|
||||
|
||||
CONFIG_RETAINED_MEM=y
|
||||
CONFIG_RETENTION=y
|
||||
CONFIG_RETENTION_BOOT_MODE=y
|
||||
@@ -4,9 +4,9 @@
|
||||
# SPDX-License-Identifier: MIT
|
||||
|
||||
config BOARD_NRFMICRO
|
||||
select SOC_NRF52840_QIAA if BOARD_NRFMICRO_NRF52840
|
||||
select SOC_NRF52840_QIAA if BOARD_NRFMICRO_NRF52840_FLIPPED
|
||||
select SOC_NRF52833_QIAA if BOARD_NRFMICRO_NRF52833
|
||||
imply RETAINED_MEM
|
||||
imply RETENTION
|
||||
imply RETENTION_BOOT_MODE
|
||||
select SOC_NRF52840_QIAA if BOARD_NRFMICRO_NRF52840_ZMK
|
||||
select SOC_NRF52840_QIAA if BOARD_NRFMICRO_NRF52840_FLIPPED_ZMK
|
||||
select SOC_NRF52833_QIAA if BOARD_NRFMICRO_NRF52833_ZMK
|
||||
imply RETAINED_MEM if BOARD_NRFMICRO_NRF52840_ZMK || BOARD_NRFMICRO_NRF52840_FLIPPED_ZMK || BOARD_NRFMICRO_NRF52833_ZMK
|
||||
imply RETENTION if BOARD_NRFMICRO_NRF52840_ZMK || BOARD_NRFMICRO_NRF52840_FLIPPED_ZMK || BOARD_NRFMICRO_NRF52833_ZMK
|
||||
imply RETENTION_BOOT_MODE if BOARD_NRFMICRO_NRF52840_ZMK || BOARD_NRFMICRO_NRF52840_FLIPPED_ZMK || BOARD_NRFMICRO_NRF52833_ZMK
|
||||
|
||||
@@ -1,14 +1,9 @@
|
||||
board:
|
||||
name: nrfmicro
|
||||
vendor: joric
|
||||
socs:
|
||||
- name: nrf52840
|
||||
variants:
|
||||
- name: flipped
|
||||
- name: nrf52833
|
||||
revision:
|
||||
format: major.minor.patch
|
||||
default: 1.3.0
|
||||
revisions:
|
||||
- name: 1.3.0
|
||||
- name: 1.1.0
|
||||
extend: nrfmicro
|
||||
variants:
|
||||
- name: zmk
|
||||
qualifier: nrf52840
|
||||
- name: flipped_zmk
|
||||
qualifier: nrf52840
|
||||
- name: zmk
|
||||
qualifier: nrf52833
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
file_format: "1"
|
||||
id: nrfmicro/nrf52833
|
||||
id: nrfmicro/nrf52833/zmk
|
||||
name: nRFMicro (nRF52833)
|
||||
type: board
|
||||
arch: arm
|
||||
|
||||
29
app/boards/joric/nrfmicro/nrfmicro_nrf52833_zmk.dts
Normal file
29
app/boards/joric/nrfmicro/nrfmicro_nrf52833_zmk.dts
Normal file
@@ -0,0 +1,29 @@
|
||||
/*
|
||||
* Copyright (c) 2026 The ZMK Contributors
|
||||
*
|
||||
* SPDX-License-Identifier: MIT
|
||||
*/
|
||||
|
||||
#include <../boards/joric/nrfmicro/nrfmicro_nrf52833.dts>
|
||||
#include <common/nordic/nrf52833_uf2_boot_mode.dtsi>
|
||||
|
||||
/ {
|
||||
chosen {
|
||||
zmk,battery = &vbatt;
|
||||
};
|
||||
|
||||
// Node name must match original "EXT_POWER" label to preserve user settings.
|
||||
EXT_POWER {
|
||||
compatible = "zmk,ext-power-generic";
|
||||
control-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
|
||||
init-delay-ms = <50>;
|
||||
};
|
||||
|
||||
vbatt: vbatt {
|
||||
compatible = "zmk,battery-voltage-divider";
|
||||
io-channels = <&adc 2>;
|
||||
output-ohms = <2000000>;
|
||||
full-ohms = <(2000000 + 820000)>;
|
||||
};
|
||||
};
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
file_format: "1"
|
||||
id: nrfmicro/nrf52840
|
||||
id: nrfmicro/nrf52840/zmk
|
||||
name: nRFMicro (nRF52840) 1.1/1.2/1.3
|
||||
type: board
|
||||
arch: arm
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
file_format: "1"
|
||||
id: nrfmicro/nrf52840/flipped
|
||||
id: nrfmicro/nrf52840/flipped_zmk
|
||||
name: nRFMicro nRF52840 (flipped)
|
||||
type: board
|
||||
arch: arm
|
||||
|
||||
@@ -1,6 +0,0 @@
|
||||
/*
|
||||
* Copyright (c) 2020 The ZMK Contributors
|
||||
*
|
||||
* SPDX-License-Identifier: MIT
|
||||
*/
|
||||
|
||||
17
app/boards/joric/nrfmicro/nrfmicro_nrf52840_flipped_zmk.dts
Normal file
17
app/boards/joric/nrfmicro/nrfmicro_nrf52840_flipped_zmk.dts
Normal file
@@ -0,0 +1,17 @@
|
||||
/*
|
||||
* Copyright (c) 2026 The ZMK Contributors
|
||||
*
|
||||
* SPDX-License-Identifier: MIT
|
||||
*/
|
||||
|
||||
#include <../boards/joric/nrfmicro/nrfmicro_nrf52840_flipped.dts>
|
||||
#include <common/nordic/nrf52840_uf2_boot_mode.dtsi>
|
||||
|
||||
/ {
|
||||
// Node name must match original "EXT_POWER" label to preserve user settings.
|
||||
EXT_POWER {
|
||||
compatible = "zmk,ext-power-generic";
|
||||
control-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
|
||||
init-delay-ms = <50>;
|
||||
};
|
||||
};
|
||||
29
app/boards/joric/nrfmicro/nrfmicro_nrf52840_zmk.dts
Normal file
29
app/boards/joric/nrfmicro/nrfmicro_nrf52840_zmk.dts
Normal file
@@ -0,0 +1,29 @@
|
||||
/*
|
||||
* Copyright (c) 2026 The ZMK Contributors
|
||||
*
|
||||
* SPDX-License-Identifier: MIT
|
||||
*/
|
||||
|
||||
#include <../boards/joric/nrfmicro/nrfmicro_nrf52840.dts>
|
||||
#include <common/nordic/nrf52840_uf2_boot_mode.dtsi>
|
||||
|
||||
/ {
|
||||
|
||||
chosen {
|
||||
zmk,battery = &vbatt;
|
||||
};
|
||||
|
||||
// Node name must match original "EXT_POWER" label to preserve user settings.
|
||||
EXT_POWER {
|
||||
compatible = "zmk,ext-power-generic";
|
||||
control-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
|
||||
init-delay-ms = <50>;
|
||||
};
|
||||
|
||||
vbatt: vbatt {
|
||||
compatible = "zmk,battery-voltage-divider";
|
||||
io-channels = <&adc 2>;
|
||||
output-ohms = <2000000>;
|
||||
full-ohms = <(2000000 + 820000)>;
|
||||
};
|
||||
};
|
||||
@@ -1,8 +1,8 @@
|
||||
# Copyright (c) 2020 Pete Johanson, Derek Schmell
|
||||
# Copyright (c) 2026 Pete Johanson, Derek Schmell
|
||||
# SPDX-License-Identifier: Apache-2.0
|
||||
|
||||
config BOARD_BLUEMICRO840
|
||||
select SOC_NRF52840_QIAA
|
||||
imply RETAINED_MEM
|
||||
imply RETENTION
|
||||
imply RETENTION_BOOT_MODE
|
||||
imply RETAINED_MEM if BOARD_BLUEMICRO840_NRF52840_ZMK
|
||||
imply RETENTION if BOARD_BLUEMICRO840_NRF52840_ZMK
|
||||
imply RETENTION_BOOT_MODE if BOARD_BLUEMICRO840_NRF52840_ZMK
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
file_format: "1"
|
||||
id: bluemicro840
|
||||
id: bluemicro840//zmk
|
||||
name: BlueMicro840 v1
|
||||
type: board
|
||||
arch: arm
|
||||
|
||||
@@ -0,0 +1,29 @@
|
||||
/*
|
||||
* Copyright (c) 2026 Pete Johanson, Derek Schmell
|
||||
*
|
||||
* SPDX-License-Identifier: MIT
|
||||
*/
|
||||
|
||||
#include <../boards/jpconstantineau/bluemicro840/bluemicro840.dts>
|
||||
#include <common/nordic/nrf52840_uf2_boot_mode.dtsi>
|
||||
|
||||
/ {
|
||||
chosen {
|
||||
zmk,battery = &vbatt;
|
||||
};
|
||||
|
||||
// Node name must match original "EXT_POWER" label to preserve user settings.
|
||||
EXT_POWER {
|
||||
compatible = "zmk,ext-power-generic";
|
||||
init-delay-ms = <20>;
|
||||
control-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
vbatt: vbatt {
|
||||
compatible = "zmk,battery-voltage-divider";
|
||||
io-channels = <&adc 7>;
|
||||
output-ohms = <2000000>;
|
||||
full-ohms = <(2000000 + 806000)>;
|
||||
};
|
||||
|
||||
};
|
||||
@@ -1,5 +1,5 @@
|
||||
board:
|
||||
name: bluemicro840
|
||||
vendor: jpconstantineau
|
||||
socs:
|
||||
- name: nrf52840
|
||||
extend: bluemicro840
|
||||
variants:
|
||||
- name: zmk
|
||||
qualifier: nrf52840
|
||||
|
||||
@@ -3,3 +3,5 @@ board:
|
||||
vendor: kbdfans
|
||||
socs:
|
||||
- name: rp2040
|
||||
variants:
|
||||
- name: zmk
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
file_format: "1"
|
||||
id: tofu65
|
||||
id: tofu65//zmk
|
||||
name: KBDfans Tofu65 2.0
|
||||
type: board
|
||||
arch: arm
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
file_format: "1"
|
||||
id: bdn9
|
||||
id: bdn9//zmk
|
||||
name: BDN9 (Rev2)
|
||||
type: board
|
||||
arch: arm
|
||||
|
||||
@@ -3,6 +3,8 @@ board:
|
||||
vendor: keebio
|
||||
socs:
|
||||
- name: stm32f072xb
|
||||
variants:
|
||||
- name: zmk
|
||||
revision:
|
||||
format: major.minor.patch
|
||||
default: 2.0.0
|
||||
|
||||
@@ -3,9 +3,6 @@
|
||||
|
||||
if BOARD_PUCHI_BLE
|
||||
|
||||
config BOARD
|
||||
default "puchi_ble"
|
||||
|
||||
if USB_DEVICE_STACK
|
||||
|
||||
config USB_NRFX
|
||||
@@ -13,7 +10,4 @@ config USB_NRFX
|
||||
|
||||
endif # USB_DEVICE_STACK
|
||||
|
||||
config BT_CTLR
|
||||
default BT
|
||||
|
||||
endif # BOARD_PUCHI_BLE
|
||||
|
||||
@@ -5,6 +5,6 @@
|
||||
|
||||
config BOARD_PUCHI_BLE
|
||||
select SOC_NRF52840_QIAA
|
||||
imply RETAINED_MEM
|
||||
imply RETENTION
|
||||
imply RETENTION_BOOT_MODE
|
||||
imply RETAINED_MEM if BOARD_PUCHI_BLE_NRF52840_ZMK
|
||||
imply RETENTION if BOARD_PUCHI_BLE_NRF52840_ZMK
|
||||
imply RETENTION_BOOT_MODE if BOARD_PUCHI_BLE_NRF52840_ZMK
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
board:
|
||||
name: puchi_ble
|
||||
vendor: keycapsss
|
||||
socs:
|
||||
- name: nrf52840
|
||||
extend: puchi_ble
|
||||
variants:
|
||||
- name: zmk
|
||||
qualifier: nrf52840
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
file_format: "1"
|
||||
id: puchi_ble
|
||||
id: puchi_ble//zmk
|
||||
name: Puchi-BLE V1
|
||||
type: board
|
||||
arch: arm
|
||||
|
||||
29
app/boards/keycapsss/puchi_ble/puchi_ble_nrf52840_zmk.dts
Normal file
29
app/boards/keycapsss/puchi_ble/puchi_ble_nrf52840_zmk.dts
Normal file
@@ -0,0 +1,29 @@
|
||||
/*
|
||||
* Copyright (c) 2026 The ZMK Contributors
|
||||
*
|
||||
* SPDX-License-Identifier: MIT
|
||||
*/
|
||||
|
||||
#include <../boards/keycapsss/puchi_ble/puchi_ble.dts>
|
||||
#include <common/nordic/nrf52840_uf2_boot_mode.dtsi>
|
||||
|
||||
|
||||
/ {
|
||||
chosen {
|
||||
zmk,battery = &vbatt;
|
||||
};
|
||||
|
||||
// Node name must match original "EXT_POWER" label to preserve user settings.
|
||||
EXT_POWER {
|
||||
compatible = "zmk,ext-power-generic";
|
||||
control-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
vbatt: vbatt {
|
||||
compatible = "zmk,battery-voltage-divider";
|
||||
io-channels = <&adc 2>;
|
||||
output-ohms = <2000000>;
|
||||
full-ohms = <(2000000 + 820000)>;
|
||||
};
|
||||
};
|
||||
|
||||
@@ -13,5 +13,5 @@ outputs:
|
||||
- usb
|
||||
- ble
|
||||
siblings:
|
||||
- adv360pro_left
|
||||
- adv360pro_right
|
||||
- adv360pro_left//zmk
|
||||
- adv360pro_right//zmk
|
||||
|
||||
@@ -3,7 +3,11 @@ boards:
|
||||
vendor: kinesis
|
||||
socs:
|
||||
- name: nrf52840
|
||||
variants:
|
||||
- name: zmk
|
||||
- name: adv360pro_right
|
||||
vendor: kinesis
|
||||
socs:
|
||||
- name: nrf52840
|
||||
variants:
|
||||
- name: zmk
|
||||
|
||||
@@ -3,6 +3,8 @@ boards:
|
||||
vendor: lowprokb
|
||||
socs:
|
||||
- name: nrf52840
|
||||
variants:
|
||||
- name: zmk
|
||||
revision:
|
||||
format: major.minor.patch
|
||||
default: 2.0.0
|
||||
@@ -14,6 +16,8 @@ boards:
|
||||
vendor: lowprokb
|
||||
socs:
|
||||
- name: nrf52840
|
||||
variants:
|
||||
- name: zmk
|
||||
revision:
|
||||
format: major.minor.patch
|
||||
default: 2.0.0
|
||||
|
||||
@@ -15,5 +15,5 @@ revisions:
|
||||
- 2.0.0
|
||||
- 1.0.0
|
||||
siblings:
|
||||
- corneish_zen_left
|
||||
- corneish_zen_right
|
||||
- corneish_zen_left//zmk
|
||||
- corneish_zen_right//zmk
|
||||
|
||||
@@ -45,7 +45,7 @@ struct output_status_state {
|
||||
|
||||
static struct output_status_state get_state(const zmk_event_t *_eh) {
|
||||
return (struct output_status_state){
|
||||
.selected_endpoint = zmk_endpoints_selected(),
|
||||
.selected_endpoint = zmk_endpoint_get_selected(),
|
||||
.active_profile_connected = zmk_ble_active_profile_is_connected(),
|
||||
.active_profile_bonded = !zmk_ble_active_profile_is_open(),
|
||||
};
|
||||
|
||||
@@ -3,6 +3,6 @@
|
||||
|
||||
config BOARD_NRF52840_M2
|
||||
select SOC_NRF52840_QIAA
|
||||
imply RETAINED_MEM
|
||||
imply RETENTION
|
||||
imply RETENTION_BOOT_MODE
|
||||
imply RETAINED_MEM if BOARD_NRF52840_M2_NRF52840_ZMK
|
||||
imply RETENTION if BOARD_NRF52840_M2_NRF52840_ZMK
|
||||
imply RETENTION_BOOT_MODE if BOARD_NRF52840_M2_NRF52840_ZMK
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
board:
|
||||
name: nrf52840_m2
|
||||
vendor: makerdiary
|
||||
socs:
|
||||
- name: nrf52840
|
||||
extend: nrf52840_m2
|
||||
variants:
|
||||
- name: zmk
|
||||
qualifier: nrf52840
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
file_format: "1"
|
||||
id: nrf52840_m2
|
||||
id: nrf52840_m2//zmk
|
||||
name: nRF52840 M.2 Module
|
||||
type: board
|
||||
arch: arm
|
||||
|
||||
@@ -0,0 +1,25 @@
|
||||
/*
|
||||
* Copyright (c) 2026 The ZMK Contributors
|
||||
*
|
||||
* SPDX-License-Identifier: MIT
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include <../boards/makerdiary/nrf52840_m2/nrf52840_m2.dts>
|
||||
#include <common/nordic/nrf52840_uf2_boot_mode.dtsi>
|
||||
|
||||
/ {
|
||||
model = "Makerdiary nRF52840 M.2 module";
|
||||
compatible = "makerdiary,nrf52840_m2";
|
||||
|
||||
chosen {
|
||||
zmk,battery = &vbatt;
|
||||
};
|
||||
|
||||
vbatt: vbatt {
|
||||
compatible = "zmk,battery-voltage-divider";
|
||||
io-channels = <&adc 0>;
|
||||
output-ohms = <1000000>;
|
||||
full-ohms = <(1000000 + 1000000)>;
|
||||
};
|
||||
};
|
||||
@@ -3,6 +3,6 @@
|
||||
|
||||
config BOARD_PILLBUG
|
||||
select SOC_NRF52840_QIAA
|
||||
imply RETAINED_MEM
|
||||
imply RETENTION
|
||||
imply RETENTION_BOOT_MODE
|
||||
imply RETAINED_MEM if BOARD_PILLBUG_NRF52840_ZMK
|
||||
imply RETENTION if BOARD_PILLBUG_NRF52840_ZMK
|
||||
imply RETENTION_BOOT_MODE if BOARD_PILLBUG_NRF52840_ZMK
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
board:
|
||||
name: pillbug
|
||||
vendor: mechwild
|
||||
socs:
|
||||
- name: nrf52840
|
||||
variants:
|
||||
- name: zmk
|
||||
qualifier: nrf52840
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
file_format: "1"
|
||||
id: pillbug
|
||||
id: pillbug//zmk
|
||||
name: PillBug
|
||||
type: board
|
||||
arch: arm
|
||||
|
||||
32
app/boards/mechwild/pillbug/pillbug_nrf52840_zmk.dts
Normal file
32
app/boards/mechwild/pillbug/pillbug_nrf52840_zmk.dts
Normal file
@@ -0,0 +1,32 @@
|
||||
/*
|
||||
* Copyright (c) 2026 The ZMK Contributors
|
||||
*
|
||||
* SPDX-License-Identifier: MIT
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <../boards/mechwild/pillbug/pillbug.dts>
|
||||
#include <common/nordic/nrf52840_uf2_boot_mode.dtsi>
|
||||
|
||||
|
||||
/ {
|
||||
chosen {
|
||||
zmk,battery = &vbatt;
|
||||
};
|
||||
|
||||
|
||||
// Node name must match original "EXT_POWER" label to preserve user settings.
|
||||
EXT_POWER {
|
||||
compatible = "zmk,ext-power-generic";
|
||||
control-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
|
||||
init-delay-ms = <50>;
|
||||
};
|
||||
|
||||
vbatt: vbatt {
|
||||
compatible = "zmk,battery-voltage-divider";
|
||||
io-channels = <&adc 2>;
|
||||
output-ohms = <2000000>;
|
||||
full-ohms = <(2000000 + 820000)>;
|
||||
};
|
||||
};
|
||||
@@ -3,3 +3,5 @@ board:
|
||||
vendor: mechwild
|
||||
socs:
|
||||
- name: nrf52840
|
||||
variants:
|
||||
- name: zmk
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
file_format: "1"
|
||||
id: s40nc
|
||||
id: s40nc//zmk
|
||||
name: S40NC
|
||||
type: board
|
||||
arch: arm
|
||||
|
||||
11
app/boards/native/native_sim/Kconfig
Normal file
11
app/boards/native/native_sim/Kconfig
Normal file
@@ -0,0 +1,11 @@
|
||||
|
||||
config BOARD_NATIVE_SIM
|
||||
bool
|
||||
select POSIX_ARCH_CONSOLE
|
||||
select NATIVE_LIBRARY
|
||||
select NATIVE_POSIX_TIMER
|
||||
select 64BIT if BOARD_NATIVE_SIM_NATIVE_ZMK_TEST_MOCK || BOARD_NATIVE_SIM_NATIVE_ZMK_DISPLAY_TESTING
|
||||
imply BOARD_NATIVE_POSIX if NATIVE_SIM_NATIVE_POSIX_COMPAT
|
||||
help
|
||||
Native simulator (Single Core)
|
||||
Will produce a console Linux process which can be executed natively.
|
||||
7
app/boards/native/native_sim/board.yml
Normal file
7
app/boards/native/native_sim/board.yml
Normal file
@@ -0,0 +1,7 @@
|
||||
board:
|
||||
extend: native_sim
|
||||
variants:
|
||||
- name: zmk_display_testing
|
||||
qualifier: native
|
||||
- name: zmk_test_mock
|
||||
qualifier: native
|
||||
@@ -0,0 +1,20 @@
|
||||
#include <dt-bindings/zmk/keys.h>
|
||||
#include <behaviors.dtsi>
|
||||
|
||||
/ {
|
||||
keymap {
|
||||
compatible = "zmk,keymap";
|
||||
|
||||
default_layer {
|
||||
bindings = <
|
||||
&none &mo 1
|
||||
&kp A &none>;
|
||||
};
|
||||
|
||||
lower_layer {
|
||||
bindings = <
|
||||
&none &trans
|
||||
&none &kp A>;
|
||||
};
|
||||
};
|
||||
};
|
||||
@@ -0,0 +1,12 @@
|
||||
# SPDX-License-Identifier: MIT
|
||||
|
||||
CONFIG_ZMK_DISPLAY=y
|
||||
|
||||
CONFIG_CONSOLE=y
|
||||
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=1000000
|
||||
|
||||
CONFIG_LOG=y
|
||||
CONFIG_LOG_BACKEND_SHOW_COLOR=n
|
||||
CONFIG_ZMK_LOG_LEVEL_DBG=y
|
||||
CONFIG_DEBUG=y
|
||||
CONFIG_SYS_CLOCK_TICKS_PER_SEC=1000
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user